VideoStudio :: Is It Ok To Save 50p Footage As 30p
May 12, 2011
I can see that saving my 50p footage as 25p would be ideal as it would just drop every other frame. However vsx3 doesn't give me the 25p option. mp4 hd 1080x1920p only offers 30p
Is this because I set vs up as PAL region ? If I changed it to ntsc would it then offer me the 25p option?
I'm really trying to find my best "saving " option for my 1920 x 1080p footage. I use 50p so I can get good slow motion but 25p or 30p would be good output if it plays nicely..
View 11 Replies
ADVERTISEMENT
Apr 14, 2013
I have a Sony camera wich can record 1920x1080 50p.It's the absolute best quality that camera can capture. The raw footage looks marvelous. After open in Videostudio X6 it plays ok but the final disc blu-ray or avchd even on dvd format the footage looks juddery especially on pans and moving subjects.
View 14 Replies
View Related
Jul 20, 2011
What settings I should use to put HD footage -after editing in VS4,using smart proxy etc..- to DVD with a minimal loss of quality. I'm using the Ulead and Corel products since years but I'm a newcomer on the level of HD-editing. I use a Pansonic HDC-SD90 with the following specifications.
Signal System 1080 / 50p, 1080 / 50i, 540 / 25p
Recording Format <Original Format>
1080 / 60p : MPEG-4 AVC/H.264
<AVCHD standard compliant>
HA / HG / HX / HE : MPEG-4 AVC/H.264
<MPEG-4 AVC file format compliant (.MP4)>
iFrame : MPEG-4 AVC/H.264
Recording / Playback Mode
(1920 x 1080) 1080 / 60p (28 Mbps / VBR), (1920 x 1080)
HA (17 Mbps / VBR), (1920 x 1080)
HG (13 Mbps / VBR), (1920 x 1080)
HX (9 Mbps / VBR), (1920 x 1080)
HE (5 Mbps / VBR), (1920 x 1080)
iFrame (28 Mbps / VBR), (960 x 540)
Audio Recording System 1080 / 60p / HA / HG / HX / HE : Dolby Digital (2 ch) iFrame : AAC (2 ch)
View 1 Replies
View Related
Jul 29, 2011
It seems VS always output a video file with 29.970 fps even if the footage was taken at 24P, 30P. Can video studio output a video that is the same as its capture fps rate?
View 2 Replies
View Related
Apr 4, 2013
I have a DVD of some old 1937 film footage. It was obviously taken as a direct transfer from degraded film stock. I have loaded it into Videostudio from the DVD (which VS has loaded as .mpg files) I have applied some sharpening and visual filters and want to export the footage. Is it best to export to DV and then use that to remake a DVD or burn the DVD direct from VS? I am assuming that trying to reburn the DVD will involve some re-encoding anyway, so either way isn't going to make a difference other than having a DV file to archive.
what I am trying to do with reference to the file conversion aspect and minimising loss of quality.
View 14 Replies
View Related
May 4, 2012
I have a project that was filmed in DVCAM and captured as an AVI file. I want to mix in some footage that was filmed in HDV, on the same camera. Presumably I can capture it as an AVI too and just add it to the project? The project is:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
View 1 Replies
View Related
Apr 4, 2012
You can see what I mean by spasming: [uRL] ... (jump to about 30 seconds in).
The above video is the 1st time that happened. It just happened to me again for the 2nd time, yesterday. I checked the raw footage and it doesn't spasm, so it's not my recording software. I loaded it into Sony Vegas and it doesn't spasm. It's JUST in VideoStudio. But it also displays as spasming when rendered out.
Why it has happened only twice in about 1000 opportunities. And, to show it's not a fluke... when it happened yesterday, I re-did the work immediately after and it still spasmed. However, I recorded something else today and it worked perfectly.
I use WMCapture for screen recording and also had Audacity running for capturing my microphone. However, I did the same thing a week ago, with no issues. It's 2 completely isolated incidents.
View 4 Replies
View Related
Jun 10, 2011
Well, I bit the bullet, and I'm slowly learning the tricks of Video Studio. Here's my question... is there anyway I can "park" footage on the lower video tracks without them showing up in my preview video? In other words, I typically place clips on lower timeline tracks and eventually insert them into the final video after tweaking the main video track. When "other" clips are parked at the lower tacks, they appear in the preview footage, which I do not want to see.... yet.
View 3 Replies
View Related
Aug 26, 2013
I have VideoStudio Pro X2 and my operating system is Windows 7 Home Premium. I'm trying to put together a film, including some sequences which have been filmed on an IPad (I think) for which the aspect ratio is a thin vertical rectangle. I would like to change the shape to a horizontal rectangle by removing segments at the top and bottom.
View 10 Replies
View Related
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Feb 28, 2012
I've been using Corel Video Studio X4 to edit the footage from my Muvi HD camera which is usually mounted on my bike frame or cycle helmet.
If I upgrade to X4 Ultimate it comes bundled with some software that is supposed to stabilise the recorded video. (proDAD Mercalli SE)
Any experience of this software plugin, is it worth upgrading for this component, or any alternatives to steady video recordings?
View 10 Replies
View Related
Sep 21, 2013
When you are burning HD footage (video type H.264, Upper Field First) to a DVD, do I keep the project input and output on UPPER FIELD FIRST? Or am I supposed to change both to FRAME BASED?
This is what I know:
SD is Lower Field First
HD is Upper Field First
"Still Photos" is Frame based
I had a videographer tell me today that to burn HD to a DVD i'm supposed to use FRAME BASED. And HD to a BLUE RAY disc is UPPER FIELD FIRST. I thought Frame Based was only for Slideshows.
I'm currently using Corel VideoStudio Pro X4 Ultimate
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: 8000 kbps
Audio data rate: 128 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
View 14 Replies
View Related
Mar 31, 2013
Video studio prox5 ultimate. I am capturing footage using a canon dv video camera, 1394a firewire adapter and firewire cord. I purchased video studio in October 2012. Now, while capturing the footage, I am experiencing a problem with the audio being captured very choppy, like there is static in the audio. This just started happening. The audio is playing fine on the camera but not capturing smoothly.
View 14 Replies
View Related
Jul 3, 2013
I currently have X5 and am wanting to burn my 1080P footage to a blu ray disc. However the settings when I select 'create disc' only allow upper or lower field, and not frame based. Does X6 have the capability to create a disc at 1080P, is it worth purchasing? Or does it even matter if I output to upper field first (quality-wise)?
View 2 Replies
View Related
Apr 13, 2013
I have Canon 60d original footage shot at 1080p 25. The clip is only 9-1/2 sec long. When I play the clip straight out of my pc folder inside VLC the clip is smooth. The moment I import the clip into VS proX5 timeline and straight away, share / create video file / AVCHD / 1920x1080p preset, VS introduces 4 dreaded stutter problems into the render finished product which is very noticeable and ugly to watch.. I am in PAL land and VS was installed to PAL. I have also tried the WMV hd1080p preset and mpeg-4 and the results where just as disappointing.
View 10 Replies
View Related
Jun 4, 2011
I've been working on a project (original is HD footage) and got a successful render to SD DVD. In trying to render a copy for my ipod i get an added audio problem no matter what ipod setting VSP x3 offers me. It's a background distortion, similar to that of clip that goes in very slow motion and the audio is echoing with reverb. The background noise appears to be in continual " waves".
However, the clip does look excellent otherwise in picture, vocals, musically etc.
View 1 Replies
View Related
Apr 20, 2013
I am using VSX5 and after rendering a project of video, where I have added transitions and titles, the video image is not as clear as it was before I rendered.
I have captured the footage from a mini dv camera using firewire, or, someone else has captured the video footage on a dvd using a dvd burner and given me the dvd to import into VSX5. Sometimes VSX5 will not read that dvd for import, so I have used freemake video converter, and converted the dvd into an mpeg file and put it in a folder on my computer where VSX5 "grabs" it. During the edit phase, the video is clear, after render, it loses some of it's clarity and is blurry.
This has not always been the case. The only thing that has changed with VSX5 is I installed sp2.
View 14 Replies
View Related
Dec 19, 2012
I have been using VS11But, I have just bought a new camera, a Panasonic HC V500. A small section of the info on the camera are the following lines:- 2D-to-3D Conversion.The camera processing engine automatically converts your 2D footage to 3D without the need for the optional 3D lens, to then be able to view on your 3D TV for an enhanced viewing experience.
Progressive Video Format for Smooth Action.The Full HD format employed in this model uses 1080/50p (AVCHD Progressive compliant) imaging. The Progressive format carries roughly double the image information of a 1080i interlace signal, minimising flickering and after-images.
As I edit and convert all my video footage into movies, will the latest VS programme retain the 3D conversion ability/facility, if so, what is the latest (or best) VS edition to purchase.
View 2 Replies
View Related
Jan 30, 2011
Trying to convert video footage on VHS video to AVI files which I can burn to DVD disc. I bought EasyCap and installed it along with Ulead Video Studio. The program seems to be running OK, the device appears to have been installed OK. I connected the VHS recorder to the Easy Cap device with the Scart to RCS lead supplied with it. When I go to capture video, nothing happens, apart from the clock starting. The screen remains blank and no video is recorded.
View 1 Replies
View Related
May 27, 2013
I am confronted with a considerably quality loss when I edited and rendered the material from my Sony HDR-CX130 camcorder. It shoots *.m2ts 1920x1080 at 50i (this is in fact 25 fps, I assume).
The loss is visible when there are moving objects or when the camera moves: very not-fluent and not-smooth movement-representation, while the original footage playbacks fine and smoothly in any mediaplayer (Sony PMB or Windows Mediaplayer).
As if the rendered material has a framerate of 12 fps! Which isn't the case, in fact.
I did some experiments: render to other formats like MPEG, tried it on the laptop of a friend who also has CVS X4 installed (W7 SP1, i5 2,3GHz, 4GB RAM),I used properties of first videoclip (which actually doesn't happen), set camcorder at 50p; all without better results.
Project properties I use in CVS X4:
PAL (25 fps)
Microsoft AVI-files
8 bit, 1920 x 1080, 25 fps
Frame-based
Microsoft Video 1
This I was told here to use in order to get stills that are also 1920 x 1080 in size.[URL]
Is the un-fluent playback of edited AVCHD normal, will it be better in version X6?This is visible when playing back the rendered footage in Sony PMB and WMplayer as well.
View 12 Replies
View Related
Nov 27, 2011
In Corel Video Studio Pro x3 - Is there anyway to save a single chosen frame as a .jpg file or some other editable picture format?
View 4 Replies
View Related
Jun 9, 2012
When I said 20 seconds. I just meant that as an example. For saving as an avi, I just wanted to use it in another project. I only wanted to be able to cut out a little part of a short part of a video on a video and overlay track and use just that part somewhere else. without saving the whole program that is about 20 minutes long. I try for nothing complicated, So I have to use the blue track above the timeline. That is what I have to figure out how to use it.
Posts: 4
Joined: Thu Jun 07, 2012 3:32 pm
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: intel
processor: amd
ram: 3 gb
Monitor/Display Make & Model: hp
Private message
View 2 Replies
View Related
Oct 23, 2011
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies
View Related
Nov 27, 2010
I've recently purchased VSX3 and can't not edit any videos. I have VSX3 loaded on two computers. On my laptop, I can "Mark-In/Mark-Out", but when I "Save Trimmed Video", the Rendering stops at 91% hang the software stops responding. On my desktop, I can "Mark-In/Mark-Out", but I do not get the option to "Save Trimmed Video". It is grayed out.
View 1 Replies
View Related
Apr 17, 2011
Is there a way to save a FILTERS ATTRIBUTES to recall for use in my next project, PRO X3.Titles can be saved, and a type of filter can be saved in FAVORITES, but not the attributes.Have searched here, and tried in the program, but no luck.
View 3 Replies
View Related
Oct 20, 2010
On my VS Pro x2 I find that "Save as still image" is suddenly not working. Get no response when I select. Before I've enjoyed using this feature many times.
View 1 Replies
View Related
Nov 4, 2011
I use VS Pro X4 Ultimate with SP1 on a new installed Windows 7 Pro 64bit system. I try to create a BD menu with submenu, but I can't save my changes in the submenu. I understand from a other topic, that I must use a template and save these changes under my Favourites Gallery. I do the steps like in the topic below, but I never get button “Add to menu template” to save it. Where is this button?
"By Customize you are changing the template, after which the “Add to menu template” will become available, now you can save the template, which will show in the Favourites gallery.
1 / First page, choose a template
2 / The screen shows the Main Menu (the Title Menu) as “Currently Displayed Menu”
3 / Double click the text on screen to change to your own.
4 / If you have created “Chapters” choose the drop-down box Main Menu and change to Untitled
5 / You are now viewing the Chapter Menu
6 / again double click the text to modify / change
7 / Selecting the Edit Tab will allow you to add background music and video/images.
Then customise the font types, size and colour etc.You can customise the Motion Menu and also select other Buttons.Again once "customised" you can save the template to the Favourites Gallery"
View 14 Replies
View Related
Dec 17, 2010
I have a 16:9 video and when I select "save as still image", the resultant image is squeezed into 4:3 and doesnt look good. I cant see anything in preferences that allows me to adjust this. Can I tweak "save as still image" so it keeps the correct aspect ratio?
View 2 Replies
View Related
Jun 2, 2011
I have an MPEG I am attempting to turn into a DVD. I have successfully split the video and imported the splits as chapter in the create disc DVD.
This all looks good; however, few of the changes I make in this screen persist next time I open the "create disc" window.
When I open it, it reads "loading project" and when I close it, it reads "saving project."
I have read elsewhere that this saving does not save and that the user must follow this up with file>save and I have without success.
In the menu & preview section, this is what I am witnessing. On the top menu of DVD, I have changed the background and added some decoration. This saves.
On the top menu of DVD, if I change "Untitled" to "Scene Selection" it does NOT save.
On the chapter menu, if I change it to a difference template, that change is saved.
On the chapter menu, if I change the chapter text, it does NOT save.
On the chapter menu, if I modify the background to a simple png, it does NOT save.
On the chapter menu, if I attempt to change the music sound track it does NOT save.
On the chapter menu, if I change the
View 4 Replies
View Related
May 23, 2013
When I am done working on a project for the day if I save it (save or save as) the next time I open the Vsp file, it is all in the main timeline. Can't edit titles, transitions or anything. Basically, it is like flattening an image. Using VS Pro 5 Ultimate.
View 8 Replies
View Related
Mar 14, 2011
Is it normal for VSX4 to take a long time to save a project? I am finding that it is taking about 20 minutes for X4 to save my project each time, which has a running time of about 45 minutes. This is an excessive amount of time wasted in waiting for it to do its thing, as I can't proceed with anything else while it is saving.
View 13 Replies
View Related
