Video studio prox5 ultimate. I am capturing footage using a canon dv video camera, 1394a firewire adapter and firewire cord. I purchased video studio in October 2012. Now, while capturing the footage, I am experiencing a problem with the audio being captured very choppy, like there is static in the audio. This just started happening. The audio is playing fine on the camera but not capturing smoothly.
View 14 RepliesI downloaded the trial version of VideoStudio 4 Pro to try it out and I like the interface and the ease of use. My problem is that when I capture MPEG 4 files in the timeline and go to replay them, the sound and video are very choppy and the replay skips the whole way through.
I converted the MPEG 4 files to wmv, and the video was smooth but I lost some of the image clarity in the converting process. I don't think it's my computer because the MPEG 4 files play nicely on MediaPlayer - just not on VideoStudio.
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View RelatedThe audio sounds choppy and I cannot figure out why Im getting it. I'm experimenting with Corel VS to learn how to use it. IF I use audio files ripped from a CD I get choppy audio after the project is rendered to a wmv hd 1080p file. It sounds fine during the preview playback in the project though.
Music that I have downloaded from the web does not do this. I assume I am doing something wrong when extracting audio from disks? I am just using Windows Media Player to RIP the CD's with. Should I use something else?
I just started using the new x4 version of VS and I noticed the playback on the preview window is very choppy. I have Pinnacle Studio HD, Sony Vegas Pro & of course Premiere CS5 installed to compare between them all, and don't have that problem, even with effects or anything added. Is there an option somewhere I'm missing? I've tried different video types and it doesn't seem to matter. The main one I'm trying is a 1280x720 AVI file I recorded.
Checked and unchecked the "Hardware Acceleration" ticks, no difference either way.
Checked DirectX....up to date.
Checked graphics drivers...up to date.
I just purchased Pro X4 online and the audio and video is choppy when I try to edit the video. I thought it was just my computer, but when I burned a DVD yesterday, it also came out incredibly choppy.
View 1 Replies View RelatedI'm running X5 on Windows 7 and I'm trying to put a VHS tape to DVD. I have a Winfast VC100 U capturing device with the red white and yellow cables plugged into the VCR. The video plays through X5 (with no sound) and when I press the 'capture video' button, it says its capturing, but in the information box, the available space does not budge. Once I stop the capture and go to the edit screen it has only saved a video of 2 frames. I have never tried to capture a VHS tape before.
My current video settings are:
Input source - Composite
TV System - PAL B
When we capture music from CD's in Pro X3, the last few seconds of the songs get cut off. Or the recording skips, cuts out a few seconds of the song right before the end, and then captures the end of the song. It's an intermittent problem with no rhyme nor reason that we can figure out as to which songs are being affected. But once a song has been captured and the end garbled, that same song will always be garbled no matter how many times we delete the recording and recapture it.
View 11 Replies View RelatedI have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
Whenever I try to capture anything from VHS > DV > Firewire to my PC VS crashes hard core. Everything freezes and it reboots.
i7-2700K I have Two brand new 4th generation SSD (Vertex 4's) in RAID 0, Read and writes @ 1GB/sec I have 16GB of RAM, 2133, half is a RAMdrive (temp). This reads and writes @ 5GB/sec. I usually write to this because there is no possible chance of bottleneck. Though I've tried SSD or HDD write too. Top of the line everything else, MB, sound, etc. How the hell much more power do I need?
Can't believe the FREE 100Kb WinDV can capture for 8 hours + no hiccups, no lost frames, but the second I try to capture, even go into capture mode with VS14 it starts to stall, crash, choke up and eventually reboot the whole F%^&$%^ machine, leaving my 6TB RAID 5 to have to rebuild.
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
Capturing VHS to MPEG? Does this tutorial work?
[URL]
I have VideoStudio X3 which has been had been running fine, however when I came to use it today I found that although I could capture video from within the capture tap, nothing was displayed on the "monitor" window. I've un-installed and re-installed and still nothing. I can control the tape transport via clicking on the play / pause / rew etc buttons under the monitor window, but there is no picture displayed. To check if this was a fault with the camera / Firewire card I launched Windows Movie maker and that displayed the incoming source without any problem, suggesting this is a VideoStudio issue.
System spec:
Vista Business 32bit
Dual core Pentium running at 2GHZ
4GB RAM
Asus 210 silent (Nvidea) with 1GB RAM
Panasonic NV=GS65 3CCD
Using the monitor on the camera I captured a clip (again nothing displayed within VS) which when placed on the time line played back on the VS monitor, although it was very interlaced with zig-zagy edging on movement.
I'm using VS x5.
Basically, I have a Sanyo HD camera which I've used to capture quite a bit of holiday footage. I've edited some together but when I output the project to either mp4 or mts the picture is choppy when panning.
The camera was set to 1080p @ 30fps (there's no option of 25fps even though the camera was bought here in the UK) which I have matched by choosing the "Custom" option when creating the movie. I've matched the bitrate (16789bps on the source) but this ends up being 15540bps on the output file. (??) According to the properties on the source file it's 29.97fps which I have also matched in the Custom settings option.
I understand I should expect dropped frames if I was trying to output the file as PAL compliant, but I've got VS set to NTSC so I don't think this is an issue.
The source file is mp4 and looks fine when viewing the panning scenes.
PC Spec:
Intel quad core 2.4Ghz
4Gb RAM
ATI Radeon 5430 Graphics card
2TB SATA HDD
Windows Ultimate x64
I am using VS ProX5. While capturing the video captures normally for a few seconds and then stucks and moves slowly with one or two frames per second and the audio is very choppy.
Other video clips in my PC plays OK in VS.
I am capturing from my Panasonic digital camera through firewire cable/port to my Windows XP PC.
It used to work properly and for the past few months it is giving problem and I left it from there.
Against my better judgment I let the latest update install on Video Studio Pro X3 (now at 13.6.2.69) and now all my videos are skipping. This is happening in the time-line with camcorder and other source videos, and worse, when produced as output videos from VS is then in those permanently. The source videos are fine because I checked in Media Player. VS produced videos played in Media Player show the skipping - ugh. Prior to the upgrade everything was perfect. how do i downgrade?
View 6 Replies View Relatedwhen i have on my timeline more than 1 audio track playing at the same time, the result is the audio sounds choppy and distorted. but when i playback just one audio clip it is fine.
View 4 Replies View RelatedWe forgot to stop capturing video using VS Pro X2. There is now a file size that is a bit over 337gb. When trying to open that file for editing, an error message pops up [There is no common media type between these pins] (17101:70:2)
I am assuming that this file cannot be opened to remove about 330gb of unwanted data.
When i want to record from tv/tuner card from vcr (smi grabber) my preview screen go's black. It records but i only hear the sound. No video preview. But it is recorded with video and audio. When i only play the vcr the video preview works in corel.
View 2 Replies View Related-I just installed the VideoStudio v10 software and it captures video fine, however I have an issue with the audio. The audio is present but for some reason there is a noticeable static on the video file. Im using a 2000 Sharp ViewCam VL-A10 monaural/analog 8mm camcorder to transfer video to my computer. Im confused because there is NO static on the original 8mm tape, when I play video on the camera, the sound is fine as well as when I plug it in to my TV set for playback. I dont understand where the static is coming from on the digital transfer? Ive tried several capture formats MPEG, DVD, AVI etc. the static is present on all versions. Im using the EasyCAP USB device with A/V plugs for capturing.
View 14 Replies View RelatedI have purchased a Sony DCR TRV480 to play Hi8 tapes and convert to Digital Video. My camera came with a USB cable that plugs into the camera in the video jack. I want to capture the video using VSProX4. What do I need to do to capture it? Do I need a driver for the USB. I dont seem to have a firewire jack on this computer but it does have a 1394 labeled jack in the back. It has several USB jacks.
View 6 Replies View RelatedI’ve been using very happily been using x2 for a number of years to make a lot of movies from my standard definition camera, I’ve loved the programme, and it has generally been able to do everything I wanted, and made for an enjoyable editing process. However, the camera has finally given up and I’m now going down the HD route, and the old x2 version just keeps crashing with any new clips. So I have recently downloaded the trial version of x5 (5 days of trial left), with the intention of trying it out and then purchasing it.
Unfortunately however I have found it to be jerky and jumpy when editing clips together, particularly when using the overlay tracks, the more overlays the worse it gets. This happens when I want to watch the edit, and while the sound runs ok the video just freezes on a frame then jumps ahead a few seconds and freezes etc etc. Impossible to watch and edit to really.
I am using the smart proxy to get the files to a manageable size, and I can see the separate proxy files in explorer. Smart proxy enabled. I have all the acceleration on that can go on (the ”Enable Hardware Encoder Acceleration” is greyed out so I can’t tick it). When I share/render the movie it comes out just fine, so it’s only with the editing process that is jumpy. I have really enjoyed x2, and could get good results really quickly, and I enjoyed the editing interface and process with Corel VS, but am now thinking I might need to change to a different video editing programme.
Computer- HP Elitebook 8560w
Everything is just running off the laptop’s hard drive. I’ve installed The CVS x5 Service Pack 1
The project has only two clips – the first from a canon d550 as below
640x480 MOV
24 bits, 1848 frames
25.000 fps
73.92 secs
And the other from the net as below
MPEG-4 file
2890 KB
H 264 High Profile Video
989 frames
24 bits 640x480 4:3
30 fps
605 Kbps data rate
Project Properties
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 4:3
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
I have a Logitech webcam (not the best, but not the worst) connected to my Windows XP 32 Bit computer. (Yes, I realize I need to upgrade. We are working on that.) However, I make YT videos on a regular basis for crafting, and have recently started using Corel VideoStudio Pro X-5 Ultimate to capture via webcam and edit my videos. When I go to watch the video after it's been captured, the sound "skips" during the video. Words will be cut off, but the video looks fine. The actual video itself doesn't skip.
I'm wondering what the best setting would be to capture a video via webcam so that it is a smooth picture/sound (as smooth as a mid grade Logitech cam will do, of course), and have the file not be 3gb. Since I upload these to YT (not via the YT uploader), the smaller the file, the better, within quality reason.
when I try to import footage from camcorder as an AV file I'm getting message, 'Capturing failed. The file is corrupted and unusable. It will be automatically deleted'.The only recent change I've made to my laptop is renewing my Panda security.
View 6 Replies View RelatedI am using VideoStudio Pro X3 on my Windows XP Pro machine (see profile for specifics) to capture and edit video from my Canon Elura 100 MiniDV Camcorder. The problem I am having is that VS Pro X3 is stopping the capture during scene changes. It stops both the software and the camera. This does NOT happen on every scene change, but happens at differing times throughout the tape. It requires me to restart the capture from that scene forward. This happens regardless of whether or not I have the 'Split by Scene' option enabled. It is frustrating to have to sit through the entire tape restarting the capture at various scene changes. Previous tapes I have used Windows Movie Maker to capture the video. I have tried WMM to capture these tapes and it does work successfully without stopping at scene transitions. A related question is on Data Rate. The data rate listed under the properties menu in VS Pro X3 is almost 2x for the clips captured with VS Pro X3 vs the same clip captured with WMM while all other attributes are the same (including file size)?
View 4 Replies View RelatedBasically, I want to use part/pieces of several project files already created, i.e. to combine the chosen sections into one new project file. Have looked in the Manual and cannot locate the answer! I am now using Prox5.
View 4 Replies View RelatedWhat's the best format to use when transferring VHS tapes to my p.c? I've tried AVI but an average tape takes up to 400Mb on my hard drive which seems excessive. The VHS tapes mainly have films and documentaries the majority of which will be deleted once I've watched them on my PC.
View 2 Replies View RelatedI get no audio on playback of videos captured from my VCR using Easy CAP. I've tried making the USB audio input my default mic, and clicking the listen to this mic, and gotten as far as hearing the video sound as I capture. But still no playback sound. Even tried switching back to speakers for playback.
View 1 Replies View RelatedI have been trying to change my audio input when capturing and i cannot seem to find a way to do this. I am using a logitech usb microphone or a plantronics one, however i cannot change it. It has it checked and grayed out, why isn't this an option?
View 2 Replies View RelatedThough I am a long time CorelDraw user I've recently download VideoStudio Pro trial. The problem I am having is importing a sequence of animation images (360 total at 30frames/sec) The images where render and exported from Lightwave3D (jpg)
The only way I found to import the images was through the capture button and that worked fine. Once that was done imported VS editor and exported to several formats...
the problem is the sequence is choppy and not smooth it is a wee bit choppy the 30 frames/sec imports fine but the final play back is not smooth as it should be. If I export directly to video from Lightwave the playback is smooth. I'd render direct from LW but LW is is a wee bit wonky at time when writing direct to video format. LW prefers direct to image then you would composite in a 3rd party program
I tried VS video at 60 frames, 15 frames that made no difference at all the same unsmooth playback
How do I import a sequence of images at 30/sec so then export so that the playback is smooth.
Unfortunately, in my project which includes HD files, proxy files are not created automatically after capturing, even the "create proxy files" is checked. So to get the proxy files, I have to select all the clips in the timeline and right click to check "create proxy files". What I have to do in order to get automatically the proxy files.
View 8 Replies View Related