VideoStudio :: 14 Keeps Crashing When Capturing From DV?
Aug 27, 2012
Whenever I try to capture anything from VHS > DV > Firewire to my PC VS crashes hard core. Everything freezes and it reboots.
i7-2700K I have Two brand new 4th generation SSD (Vertex 4's) in RAID 0, Read and writes @ 1GB/sec I have 16GB of RAM, 2133, half is a RAMdrive (temp). This reads and writes @ 5GB/sec. I usually write to this because there is no possible chance of bottleneck. Though I've tried SSD or HDD write too. Top of the line everything else, MB, sound, etc. How the hell much more power do I need?
Can't believe the FREE 100Kb WinDV can capture for 8 hours + no hiccups, no lost frames, but the second I try to capture, even go into capture mode with VS14 it starts to stall, crash, choke up and eventually reboot the whole F%^&$%^ machine, leaving my 6TB RAID 5 to have to rebuild.
I'm running X5 on Windows 7 and I'm trying to put a VHS tape to DVD. I have a Winfast VC100 U capturing device with the red white and yellow cables plugged into the VCR. The video plays through X5 (with no sound) and when I press the 'capture video' button, it says its capturing, but in the information box, the available space does not budge. Once I stop the capture and go to the edit screen it has only saved a video of 2 frames. I have never tried to capture a VHS tape before.
My current video settings are: Input source - Composite TV System - PAL B
When we capture music from CD's in Pro X3, the last few seconds of the songs get cut off. Or the recording skips, cuts out a few seconds of the song right before the end, and then captures the end of the song. It's an intermittent problem with no rhyme nor reason that we can figure out as to which songs are being affected. But once a song has been captured and the end garbled, that same song will always be garbled no matter how many times we delete the recording and recapture it.
I have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
I have VideoStudio X3 which has been had been running fine, however when I came to use it today I found that although I could capture video from within the capture tap, nothing was displayed on the "monitor" window. I've un-installed and re-installed and still nothing. I can control the tape transport via clicking on the play / pause / rew etc buttons under the monitor window, but there is no picture displayed. To check if this was a fault with the camera / Firewire card I launched Windows Movie maker and that displayed the incoming source without any problem, suggesting this is a VideoStudio issue.
System spec: Vista Business 32bit Dual core Pentium running at 2GHZ 4GB RAM Asus 210 silent (Nvidea) with 1GB RAM
Panasonic NV=GS65 3CCD
Using the monitor on the camera I captured a clip (again nothing displayed within VS) which when placed on the time line played back on the VS monitor, although it was very interlaced with zig-zagy edging on movement.
We forgot to stop capturing video using VS Pro X2. There is now a file size that is a bit over 337gb. When trying to open that file for editing, an error message pops up [There is no common media type between these pins] (17101:70:2)
I am assuming that this file cannot be opened to remove about 330gb of unwanted data.
When i want to record from tv/tuner card from vcr (smi grabber) my preview screen go's black. It records but i only hear the sound. No video preview. But it is recorded with video and audio. When i only play the vcr the video preview works in corel.
-I just installed the VideoStudio v10 software and it captures video fine, however I have an issue with the audio. The audio is present but for some reason there is a noticeable static on the video file. Im using a 2000 Sharp ViewCam VL-A10 monaural/analog 8mm camcorder to transfer video to my computer. Im confused because there is NO static on the original 8mm tape, when I play video on the camera, the sound is fine as well as when I plug it in to my TV set for playback. I dont understand where the static is coming from on the digital transfer? Ive tried several capture formats MPEG, DVD, AVI etc. the static is present on all versions. Im using the EasyCAP USB device with A/V plugs for capturing.
I have purchased a Sony DCR TRV480 to play Hi8 tapes and convert to Digital Video. My camera came with a USB cable that plugs into the camera in the video jack. I want to capture the video using VSProX4. What do I need to do to capture it? Do I need a driver for the USB. I dont seem to have a firewire jack on this computer but it does have a 1394 labeled jack in the back. It has several USB jacks.
I have a Logitech webcam (not the best, but not the worst) connected to my Windows XP 32 Bit computer. (Yes, I realize I need to upgrade. We are working on that.) However, I make YT videos on a regular basis for crafting, and have recently started using Corel VideoStudio Pro X-5 Ultimate to capture via webcam and edit my videos. When I go to watch the video after it's been captured, the sound "skips" during the video. Words will be cut off, but the video looks fine. The actual video itself doesn't skip.
I'm wondering what the best setting would be to capture a video via webcam so that it is a smooth picture/sound (as smooth as a mid grade Logitech cam will do, of course), and have the file not be 3gb. Since I upload these to YT (not via the YT uploader), the smaller the file, the better, within quality reason.
when I try to import footage from camcorder as an AV file I'm getting message, 'Capturing failed. The file is corrupted and unusable. It will be automatically deleted'.The only recent change I've made to my laptop is renewing my Panda security.
I am using VideoStudio Pro X3 on my Windows XP Pro machine (see profile for specifics) to capture and edit video from my Canon Elura 100 MiniDV Camcorder. The problem I am having is that VS Pro X3 is stopping the capture during scene changes. It stops both the software and the camera. This does NOT happen on every scene change, but happens at differing times throughout the tape. It requires me to restart the capture from that scene forward. This happens regardless of whether or not I have the 'Split by Scene' option enabled. It is frustrating to have to sit through the entire tape restarting the capture at various scene changes. Previous tapes I have used Windows Movie Maker to capture the video. I have tried WMM to capture these tapes and it does work successfully without stopping at scene transitions. A related question is on Data Rate. The data rate listed under the properties menu in VS Pro X3 is almost 2x for the clips captured with VS Pro X3 vs the same clip captured with WMM while all other attributes are the same (including file size)?
Basically, I want to use part/pieces of several project files already created, i.e. to combine the chosen sections into one new project file. Have looked in the Manual and cannot locate the answer! I am now using Prox5.
Video studio prox5 ultimate. I am capturing footage using a canon dv video camera, 1394a firewire adapter and firewire cord. I purchased video studio in October 2012. Now, while capturing the footage, I am experiencing a problem with the audio being captured very choppy, like there is static in the audio. This just started happening. The audio is playing fine on the camera but not capturing smoothly.
What's the best format to use when transferring VHS tapes to my p.c? I've tried AVI but an average tape takes up to 400Mb on my hard drive which seems excessive. The VHS tapes mainly have films and documentaries the majority of which will be deleted once I've watched them on my PC.
I get no audio on playback of videos captured from my VCR using Easy CAP. I've tried making the USB audio input my default mic, and clicking the listen to this mic, and gotten as far as hearing the video sound as I capture. But still no playback sound. Even tried switching back to speakers for playback.
I have been trying to change my audio input when capturing and i cannot seem to find a way to do this. I am using a logitech usb microphone or a plantronics one, however i cannot change it. It has it checked and grayed out, why isn't this an option?
Unfortunately, in my project which includes HD files, proxy files are not created automatically after capturing, even the "create proxy files" is checked. So to get the proxy files, I have to select all the clips in the timeline and right click to check "create proxy files". What I have to do in order to get automatically the proxy files.
I've tried everything I can think of to get the audio to playback after capturing from a VHS tape, but can't figure it out. I can hear the audio output from my sound card during capture, but playback has no audio. I noticed in the Video Properties box of the Options menu in Capture that the "audio source" says "pass through to sound card", but the "audio source" box is grayed out and can't be changed. I am using an S-Video cable for the video from the VCR, and L/R audio to a stereo plug into my Line In on the motherboard. I can hear the audio during capture, but not playback. BTW, the only means I have at this point is to use Pinnacle Studio to capture, then export as an mpg. file to import into VideoStudio. Pinnacle gives me a choice in audio inputs. Why is VSX4 not allowing that?
We go to Ulead Video Studio SE DVD then Movie Wizard then Capture then Option then Video and Audio Capturing Property Settings… Source (I use EasyCap (Syntek STK1150)it is working fine)
The only thing I need is to tell the program to remember
Input source: Composite video and TV system: PAL.
Every time I start program the setting are lost! the default S-Video and NTSC (Some time you want to record something on TV and you losing the moment setting your Ulead VideoStudeo SE DVD)
Using VideoStudio X4. After initial problems with installation it has now installed fine and is working well. However, when capturing video from my Panasonic NV-GS400 mini dv camcorder the film does not show in the preview window. It did at first but now does not preview. I have not changed any settings nor have I changed anything in my method of capture. The film does capture ok - capture in avi format - its just a little unsettling not being able to see it during capture. I watch it on the pull out screen of the camcorder so I can tell when to stop capture etc.
Also, when capturing, the film runs for a few seconds then stops and then starts again and the capture begins from the second start point. I never had the problem with Ulead 9 but did have it with ProX2 but wondered if that was just a glitch because I was running it on Windows 7 and it had not originally been developed for that. Apart from that the program works well even when rendering HD footage from my new Panasonic HDC-TM700.
I saw a thread that had something to do with X4 and .mp4 issues involving some other software or something? I'm using barebones X3 and when trying to add some .mp4 files, X3 crashes. Some of them work and are added to the library, but most do not and crash X3.
I just tried to burn a DVD for the first time on my new computer and it keeps getting to "output disc" and crashing. A Windows message pops up saying it had a problem and needs to close the program. Is this something with Windows 7? I've already updated my VS x2 and directX.
I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect
Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???
How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!
Using X5 pro with the updates applied. Over several versions and several years, I developed the habit of converting the video .MOD files created by a JVC camcorder to .mpg before doing any editing using them. For the purpose of this topic, the reasons for that are unimportant. But for the first time, in the last few days I needed to get several basic projects done quickly and elected to bypass this mechanism and work directly with the .MOD files in the edit mode.
And as a result, I am seeing for the first time intermittent crashing of X5 during an edit phase. It's happening on different source files and vsp project files. Never at the same place in a project file, nor during the same action activity. Occurs during clip mode and project mode.
When it happens, the X5 desktop just 'whites out' - the outline of the program desktop is discernable, but barely. The only way out is to kill the program and re-start. Wait long enough and windows will present that option anyway. If one has saved the vsp file (repeatedly) during edit, restart does not lose much. Otherwise - begin again from scratch.
My Corel VS X6 Pro is crashing during a MPEG-4 1920x1080 export at 69% complete. Happened twice in a row. The error message refers to this dump file. I have been able to export this same video before, this just started happening.
I tried to add the dump file as an attachment but the .DMP extension is not allowed.
1. SUBJECT: Corel Video studio crashing at sound modification
2. Describe your problem: I just installed corel VS pro 5x ultimate, I also updated with service pack 1. However while making my first video corel keeps crashing when I try to modify "clip volume" then click "play" or click on sound mixer. I get the windows popup stating "corel has stopped responding".
3. What devices are involved and their mode of connection? N/A
4. The Version of program is being used VS X5
5. list all patches/updates that have been installed relating to that version of the program. service pack 1
6. Details of the source files. .avi files captured via the bandicam video capturing software. Music is a simple mp3 downloaded from internet.
7. Project Properties (Alt+Enter) NTSC non-drop frame (30 fps) Microsoft AVI files 24 bits, 320 x 240, 30 fps Upper Field First Uncompressed PCM, 44.100 kHz, 16 Bit, Stereo
8. PAL or NTSC NTSC
9. Error Codes (if any): At what point did the Error occur, during the Editing stage, or after Share – Create Disc The error occurs when I modify the "clip volume" and then hit play or just simply click on the sound mixer.
10. What are you trying to make, burn a Standard DVD, a HD Bluray or Avchd DVD, or Video for the internet. video for the internet
By following these simple rules, you will increase your chances of obtaining a solution to your problem.
If you have not already done so, click on User Control Panel, then go to the Profile tab in the forum header and fill in the fields titled: update your user profile to include your PC specification
System Manufacturer: Alienware System Model: M18xR1 Operating System: Windows 7 Home premium System Drive: C 32bit or 64bit: 64bit Motherboard:InsydeH2O Version 1.0 A04 Processor:Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (8 CPUs), ~2.2GHz Ram:16GB Video Card:NVIDIA GeForce GTX 560M Sound Card: Hard Drive Capacity:455GB
I am having massive issues with my brand new version of VideoStudio Pro x4 crashing when I try do to the following : import jpgs, create a video file, upload a file to youtube (it will create the mp4 file but says cannot create the waveform). I am running this on Windows Vista Sony Vaio All in one with a 2.5 ghz processor. I am trying to create a 6 screen split screen video. It also seems to be degrading my vid quality. I tried to submit a case to your support team and both times it says case failed.
The errors I am getting is "unspecified error, send dump file to Corel for analysis."
Then it shuts down.
I am planning to wipe and reload this puter and set it up for Windows 7 , I know I have one issue with uploading ( I have something in the background that is choking my upload speed. yes we have run everything to figure out what it is, when I run it in safe mode I don't have the problem."
The all in one does not have a graphics card but that should not be causing issues with importing jpgs.
