I saw a thread that had something to do with X4 and .mp4 issues involving some other software or something? I'm using barebones X3 and when trying to add some .mp4 files, X3 crashes. Some of them work and are added to the library, but most do not and crash X3.
This is the most recent dump file: [URL] ...
I've been found a bit of a problem, when I try to assign an IES file to a light MAX Design hard crashes. The odd part is that when I open the IES file in 3ds MAX, not Design, it loads correctly. I've installed all the updates but it still happens.
I've attached the IES files in question, how can get it to work.
Edit- apparently I can't attach the IES files for some reason.
I have a project that suddenly won't load. I have 25 versions of it, I save it under a new file name each time in case I need to go back to an older version.
Trouble is most of the versions won't load! Only the very early versions will load. Some of the later version start to load then disappear.
Hardware hasn't changed on the PC, maybe the video drivers have been updated, thats about it.
I've download X3 Pro on a free trial to see what it can do before I buy. I've tried doing a few things.
Photo montage against a video track (default movie reel supplied in VS).
Tried a HD def video single video track about 50 seconds long using output from a Go Pro Hero HD
Tried a video in multiple formats using Main video and combinations of overlays (1 or 2) with video in corners or elsewhere.
Sometimes it works but more often than not it crashes out and creates a dump file.
Details of the files I'm playing with when it comes to video.
They are MP4 files directly out of the go pro - (i'll get additional shortly when i return home).
I am running x3 pro downloaded directly from Corel with a 'check updates patch' installed.
I have directx 11.
I'll supply more info shortly when I'm back in front of the machine.
I just tried to burn a DVD for the first time on my new computer and it keeps getting to "output disc" and crashing. A Windows message pops up saying it had a problem and needs to close the program. Is this something with Windows 7? I've already updated my VS x2 and directX.
View 6 Replies View RelatedWhenever I try to capture anything from VHS > DV > Firewire to my PC VS crashes hard core. Everything freezes and it reboots.
i7-2700K I have Two brand new 4th generation SSD (Vertex 4's) in RAID 0, Read and writes @ 1GB/sec I have 16GB of RAM, 2133, half is a RAMdrive (temp). This reads and writes @ 5GB/sec. I usually write to this because there is no possible chance of bottleneck. Though I've tried SSD or HDD write too. Top of the line everything else, MB, sound, etc. How the hell much more power do I need?
Can't believe the FREE 100Kb WinDV can capture for 8 hours + no hiccups, no lost frames, but the second I try to capture, even go into capture mode with VS14 it starts to stall, crash, choke up and eventually reboot the whole F%^&$%^ machine, leaving my 6TB RAID 5 to have to rebuild.
I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect
Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???
How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!
Using X5 pro with the updates applied. Over several versions and several years, I developed the habit of converting the video .MOD files created by a JVC camcorder to .mpg before doing any editing using them. For the purpose of this topic, the reasons for that are unimportant. But for the first time, in the last few days I needed to get several basic projects done quickly and elected to bypass this mechanism and work directly with the .MOD files in the edit mode.
And as a result, I am seeing for the first time intermittent crashing of X5 during an edit phase. It's happening on different source files and vsp project files. Never at the same place in a project file, nor during the same action activity. Occurs during clip mode and project mode.
When it happens, the X5 desktop just 'whites out' - the outline of the program desktop is discernable, but barely. The only way out is to kill the program and re-start. Wait long enough and windows will present that option anyway. If one has saved the vsp file (repeatedly) during edit, restart does not lose much. Otherwise - begin again from scratch.
My Corel VS X6 Pro is crashing during a MPEG-4 1920x1080 export at 69% complete. Happened twice in a row. The error message refers to this dump file. I have been able to export this same video before, this just started happening.
I tried to add the dump file as an attachment but the .DMP extension is not allowed.
1. SUBJECT: Corel Video studio crashing at sound modification
2. Describe your problem: I just installed corel VS pro 5x ultimate, I also updated with service pack 1. However while making my first video corel keeps crashing when I try to modify "clip volume" then click "play" or click on sound mixer. I get the windows popup stating "corel has stopped responding".
3. What devices are involved and their mode of connection? N/A
4. The Version of program is being used VS X5
5. list all patches/updates that have been installed relating to that version of the program. service pack 1
6. Details of the source files. .avi files captured via the bandicam video capturing software. Music is a simple mp3 downloaded from internet.
7. Project Properties (Alt+Enter)
NTSC non-drop frame (30 fps)
Microsoft AVI files
24 bits, 320 x 240, 30 fps
Upper Field First
Uncompressed
PCM, 44.100 kHz, 16 Bit, Stereo
8. PAL or NTSC
NTSC
9. Error Codes (if any): At what point did the Error occur, during the Editing stage, or after Share – Create Disc The error occurs when I modify the "clip volume" and then hit play or just simply click on the sound mixer.
10. What are you trying to make, burn a Standard DVD, a HD Bluray or Avchd DVD, or Video for the internet. video for the internet
By following these simple rules, you will increase your chances of obtaining a solution to your problem.
If you have not already done so, click on User Control Panel, then go to the Profile tab in the forum header and fill in the fields titled: update your user profile to include your PC specification
System Manufacturer: Alienware
System Model: M18xR1
Operating System: Windows 7 Home premium
System Drive: C
32bit or 64bit: 64bit
Motherboard:InsydeH2O Version 1.0 A04
Processor:Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (8 CPUs), ~2.2GHz
Ram:16GB
Video Card:NVIDIA GeForce GTX 560M
Sound Card:
Hard Drive Capacity:455GB
Having a problem with VS x4. For some reason, when trying to open, a windows 7 dialogue box appears asking " do you want the following program to make changes to the computer?" Program: Corel File: hard drive on computer.
Unable to click "no". Click "yes" the dialogue box disappears. When trying to open program afterwards, the same box appears.
Alright so I had VS X4 working fine in the past, now when I go to load it it always gives me this error:
[URL]
I tried reinstalling the program numerous times but it keeps saying the same thing. You can download a .DMP file here:
[URL]
I am having massive issues with my brand new version of VideoStudio Pro x4 crashing when I try do to the following : import jpgs, create a video file, upload a file to youtube (it will create the mp4 file but says cannot create the waveform). I am running this on Windows Vista Sony Vaio All in one with a 2.5 ghz processor. I am trying to create a 6 screen split screen video. It also seems to be degrading my vid quality. I tried to submit a case to your support team and both times it says case failed.
The errors I am getting is "unspecified error, send dump file to Corel for analysis."
Then it shuts down.
I am planning to wipe and reload this puter and set it up for Windows 7 , I know I have one issue with uploading ( I have something in the background that is choking my upload speed. yes we have run everything to figure out what it is, when I run it in safe mode I don't have the problem."
The all in one does not have a graphics card but that should not be causing issues with importing jpgs.
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
I get this error whenever I try to start the trial of VSx5 (Funny thing is, I am trying it because Pinnacle 15 is far too crashy for me.)
View 4 Replies View RelatedI can't put video thumbnails into the library. I had deleted previous projects from the library and now the library won't accept anything - even new captures. I can add titles-just not anything into "samples".
View 2 Replies View RelatedVideostudio 11+ won't load any .avi files,it just gives the message 'catastrophic failure'. Even if I scan the dv tape with the program it will save the files as avi but it still won't let me use them.
View 4 Replies View RelatedI have VS12. I downloaded the trial version of X5, mainly to see if it could read my VS12 files. It could. I used X5 to render a VS12 file that had continually crashed when I tried to rendered it with VS12. Not only did it render it successfully, but it did it about twice as fast as VS12 - great. However, that was yesterday. Today I've been trying to reload the original file into X5 again & I just get the message "File xxxx is already in use". Running X5 by double-clicking on the file, running X5 first & clicking the filename from the file menu or clicking Open from the file menu & selecting the file from the list - all give that result. The only way I have loaded the file is to run X5 & drag the file to the timeline. The file has opened, but the project is shown as untitled, even though there is a title. Also the project is shown as a single entity on the timeline, not made up of individual frames & captions. Where has my project gone? Is it still in X5? I've tried to open other projects, & they all give the same message! I can't try out my trial version I it won't load my projects!
PS I've just spent a few minutes holding the mouse pointer over various icons on the X5 screen & clicking a few to see where I got. After that, I had another go at loading the file - & it loaded successfully!! I assume when I loaded X5, it came up in some mode & I managed to get it out of it.
I am using VSX5 Ultimate. I installed a program called drop box and another called Helium. After installing these programs, VSX5 will no longer load. The intro screen does not even come up. I click on my short cut and my mouse pointer spins for a few seconds, then nothing. I have checked my programs and I do not have browser protect, browser manager or babylon. I uninstalled the two programs I mentioned above and restarted my computer but nothing happens still. Should I try uninstalling VSX5 and reinstalling?
View 6 Replies View RelatedI've been using this product for a few weeks and this morning it stopped working. Searched the forums, applied all of the fixes. Manually uninstalled, re-downloaded, reinstalled and still crashing on application loading. 6 hours of pure frustration. Never had an issue with X4. before I completely uninstall and purchase a new video editor?
View 3 Replies View RelatedI'm using VideoStudio X3 and installed SP2, but creating AVCHD files constantly crashes machine.
Using AVCHD videos and overlaying text, then ouputting using preset AVCHD > PAL HD 1440
99% of time just crashes, which makes program unusable!!
I recently installed VideoStudio Pro X3. Whenever I play back anything I tried edit the program crashes and a dump file error shows. I have tried using the smart proxy without success. I am trying to edit HD files *.mov. The files are only a couple of minutes so that should not be an issue. I also tried closing all other programs. When I try and playback I can only see a couple of seconds before it crashes. I am wondering if my computer does not have the resources to edit HD. I have 1024 MB of Ram.
View 4 Replies View RelatedI'm using VideoStudio X3 and installed SP2, but creating AVCHD files constantly crashes machine.Using AVCHD videos and overlaying text, then outputting using preset AVCHD > PAL HD 1440
99% of time just crashes, which makes program unusable!!
I edited a wedding video that is over 90 minutes long (it was a wedding in Ireland). It was filmed in AVCHD on a pro video camera.
I wanted to produce a standard DVD and a Blu Ray copy to send over. The DVD copy rendered fine but the Blu Ray as well as the AVCHD file crashed every time and even crashed the computer to re-start. It crashed at around 30% in and I tried a number of different combinations to accomplish this render.
What I then did after a few attempts was to look at the last frame of the couple of files it did render to see where on the time line it was crashing.
It turned out it was on a transition I customised, I think using proDAD VitaScene. It was a transition that created a twinkling star effect from one scene to the next. As soon as I removed this one transition and it rendered a Blu Ray file with no problems at all.
One question though, I am not sure why there are so many choices of Blu Ray and AVCHD in the menu. What is the difference and which one would be the generally used one.
what does this message mean: "Load from stream error"? It appears all the time and I cannot put any picture in the timeline. Some pictures are white with two black crossed lines.
View 1 Replies View RelatedI've a large number of DV AVI (Type 2) files I've edited several times using VS. But in the last couple of days X3 has stopped loading them into the project timeline. I suspect I have inadvertently deleted, or unlinked, the Type 2 codec. Strangely, the files play OK with Media Player, it's just X3 that's refusing to work! I've reinstalled X3 but that's not made any difference. How do I identify the codecs available?
View 2 Replies View RelatedI created a 30min video, with a lot of photos mixed with live video, transitions, music, etc. Now, when I try to reopen the file for futher editing, it appears the software needs to re-render all the thumbnails in my video track stream. As I mentioned, I have a lot of photos in there, so it's taking forever.
With the previous software I used (Pinnacle Studio), I could flush the cache and have the program rebuild (and store) all the thumbnail info for faster loads in subsequent sessions.
when i upload klips to the libary i recive this massage "load from stream error" what is thate?and what i must to do to not receive this massage?
View 3 Replies View RelatedThe Place Holders do not load as they did in the past. This is with the new VS Pro X6 that I just got. How can I load them so as to be useful? In X5 I used to just open the folders and they would load.
View 5 Replies View RelatedI can't load my MOV files from my Drift camera. I get the "file format mismatch". is there a patch for VS 11?
View 2 Replies View RelatedI first tried capturing the video from a Sony camcorder but VS keeps freezng up on "change field order". So then I just downloaded the files to my computer and tried to load them that way. But the program does not see MTS files in the folder.
View 4 Replies View Related
