My Corel VS X6 Pro is crashing during a MPEG-4 1920x1080 export at 69% complete. Happened twice in a row. The error message refers to this dump file. I have been able to export this same video before, this just started happening.
I tried to add the dump file as an attachment but the .DMP extension is not allowed.
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
I am having a difficult time Exporting my 640 X 360 Video In an Mpeg Format, I am making a YouTube Video in 640 X 360 ( 360P I believe the size is called ) only because that is what my source video size is. My original source video is " AVI - 30Fps " I have cut and fine tuned my 8 Second Video that took me 8+ hrs to figure out how to make
Under the Project Properties there are 2 format types available, MPEG and AVI. Under MPEG Project Options --> General, I have only 4 sizes to choose from in the frame size box, 720 x 480 - 704 X 480 - 352 X 480 - 352 X 240, And the user defined selection bullet is GREYED out.
Is it possible that because im using the trial version that I just cannot fully use the software, If so then I can go back and install my VideoStudio X4, I was hoping to Upgrade to X5 because I can directly import my Paint Shop Pro Layers as well as CorelDRAW too.
Videostudio X3 crashes everytime I try to export a video. It doesn't matter the file type inputed or how you are trying to export it. It even crashes when trying to export one of the default title screens included with the program. Have tried a clean install with no luck. I have also insured I am using the latest version.
View 5 Replies View RelatedI have already more than 100 projects running under VS X4 it is problematic to jump to other software, also because of spending 2 years studying Corel VS.I have found now (2 years to late) the top very stable professional software with Edius 6.06.
What happens.... In new installed VS X4 if i put a videofile on the timeline and go to SHARE >MAKING VIDEOFILE MENU....the computer breaks down, and gives the error: " VS X4 does not work anymore..... " and stops working, realy breaking down....
Have tryed it lots of times, it looks like at installing the program, the link to the output formats is not there and VS X4 does not now how to handle.....Yes I am going over to the professional software edius 6, but with a usermanual with 1000 pages i need studying at least one year on that....
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
I've been searching and trying to see if there's a way that I can make my video right under 500mb, basically so I can have the best quality possible but still be under Vimeo's 500mb upload limit. It's not a long video, it's slightly under 2 minutes, but I've tried about 10 different export options and they're either around 100mb and the quality is awful, or they're gigantic files.
Is there a way that I can set it to close to 500mb? I'm using Video Studio Pro X5.
I have a full HD video, a 1920x1080 resolution
I need to export video frames to images, jpeg for example, I use "Edit / Take a snapshot" from VideoStudio Pro X4 menu, but this option only exports 1024 x 576 resolution images....Can I export 1920 x 1080 resolution images?
How do I export my video to 720p mp4 file format?
I can't find the option. In fact I can't find many options. The custom settings are not very custom really as the choice is very limited or none.
Is it possible to export a part of the timeline to a new video file?
So if I have a 10 min video in the timeline, I would like to "mark in" and "mark out" from 3m02s to 5m30s, and create a new file.
I used to use Edius I could mark in and mark out from time to time and export to a new video file. Is there a workaround in Videostudio ?
I'm editing a training video, and would like to export different "chapters" to seperate video files, so I can upload the seperate videos to the web, and not have to export the entire video, as this would be too big.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I've got a problem with a Photoshop CS6 version I use in my office (Windows 7). Everytime I try to export a video from the timeline to use an image sequence on a graphic software it keeps crashing. The video render initializing starts and stops more or less at 80%.
If I cancel it, I cannot use Photoshop again as it keeps restarting at anytime only for stopping itself always at the same point. So I have to force it to close with the task manager.
For some reason I keep getting crashes when importing HDV (720p60) video into the timeline of Adobe Premiere Pro CS6. This has happened on two different machines, with similar specs.
Per the suggested guidelines, here are the specifics:
Version of Premiere Pro: CS6, Version 6.0.5 (001 (MC:264587))All updates have been installed.
Operating System: Mac OS X 10.8.5.
Source footage: HDV 720p60 video in .MOV container.
Full text of error message: "Sorry, a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project." Link to full crash report: URL....
Crash occurs when trying to import HDV .MOV file.This is a consistent problem when importing .MOV files of this type.
Complete Adobe Creative Suite is installed. Also using Episode Pro encoding software from Telestream to prepare HDV video. No other external video hardware or codecs installed.Yes, I am using the Mecury Playback Engine GPU acceleration.
Llightroom 4.4 crashes everytime I try to playback video causing the app to close. The video loads fine, I can see the thumbnail, but when I hit play I hear audio for a few seconds, the video doesn't typically play or plays for only 1 second then the app crashes. Video files play fine in quicktime or Windows media. This happened in 4.3 as well so not related to the upgrade to 4.4. Here is what is logged in the Windows error log.
Windows 7 64 bit
Application Error
Faulting application name: lightroom.exe, version: 4.4.0.11, time stamp: 0x514b016c
Faulting module name: MSVCR100.dll, version: 10.0.30319.1, time stamp: 0x4ba220dc
Exception code: 0xc0000005
Fault offset: 0x000000000003c250
Faulting process id: 0x13d4
Faulting application start time: 0x01ce58f418edb142
Faulting application path: C:Program FilesAdobeAdobe Photoshop Lightroom 4.4lightroom.exe
Faulting module path: C:Windowssystem32MSVCR100.dll
Report Id: 843f731f-c4e7-11e2-a017-00214f56581f
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
Whenever I try to export a graphic as a jpeg the program crashes. I tried clicking off the "enable background tasks" option that seemed to fis eps exports.
View 9 Replies View RelatedSo I got a new mac and since I have not been able to export anything. I've reinstalled everything, updated it and fenagled with all the settings but nothing seems to stop it. I am using the latest verton of Mavericks and it only happens when I hit export to media.I also checked adobe media encoder and that gets the same error message and cause.
View 9 Replies View RelatedI have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedLightroom 4 is regularly crashing when I Export and choose a folder in which to save the files. I'm using Windows 64 bit. Basically, it freezes and I get an error message "Lightroom has stopped working, Windows in looking for a solution" (which it doesn't seem to have found, yet.)
View 3 Replies View RelatedI'm having a major issue exporting a sequence out of premier pro CS5 that contains high res jpeg images. The system freezes up during the export. I've been successful exporting the sequence to H.264 (vimeo HD preset) after removing the jpeg. So, I am fairly confident it I've isolated the issue. However, I've gone over the recommended jpeg file sizes for premier pro and am well within the guidelines. The images I'm using are saved at a resolution of 300dpi with a size of about 5600 (w) x 3700 (h) pixels for an average of about 61 megapixels per image. The sequence plays just fine within premier pro. There is only a problem when I go to export.
View 2 Replies View RelatedI've download X3 Pro on a free trial to see what it can do before I buy. I've tried doing a few things.
Photo montage against a video track (default movie reel supplied in VS).
Tried a HD def video single video track about 50 seconds long using output from a Go Pro Hero HD
Tried a video in multiple formats using Main video and combinations of overlays (1 or 2) with video in corners or elsewhere.
Sometimes it works but more often than not it crashes out and creates a dump file.
Details of the files I'm playing with when it comes to video.
They are MP4 files directly out of the go pro - (i'll get additional shortly when i return home).
I am running x3 pro downloaded directly from Corel with a 'check updates patch' installed.
I have directx 11.
I'll supply more info shortly when I'm back in front of the machine.
My PC will crash when attempting to export in Premiere Pro, I will get the blue screen.
I ran a memory diagnostic test to see if it was the ram, it did not come back as having faulty ram.
Somtimes the pc will just freeze too.
Seems like this only happens with adobe.
I somtimes could export a file after attempting 2-3 times but now it crashes almost every time.
I have tried many different export formats but it seems to not be limited to just one format, it happens with all formats.
I have tried to find a solution but I still have not.
Here are my PC specs:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type x64-based PC
Processor AMD A6-3670 APU with Radeon(tm) HD Graphics, 3000 Mhz, 4 Core(s), 4 Logical Processor(s)
[code]....
I saw a thread that had something to do with X4 and .mp4 issues involving some other software or something? I'm using barebones X3 and when trying to add some .mp4 files, X3 crashes. Some of them work and are added to the library, but most do not and crash X3.
This is the most recent dump file: [URL] ...
I just tried to burn a DVD for the first time on my new computer and it keeps getting to "output disc" and crashing. A Windows message pops up saying it had a problem and needs to close the program. Is this something with Windows 7? I've already updated my VS x2 and directX.
View 6 Replies View RelatedWhenever I try to capture anything from VHS > DV > Firewire to my PC VS crashes hard core. Everything freezes and it reboots.
i7-2700K I have Two brand new 4th generation SSD (Vertex 4's) in RAID 0, Read and writes @ 1GB/sec I have 16GB of RAM, 2133, half is a RAMdrive (temp). This reads and writes @ 5GB/sec. I usually write to this because there is no possible chance of bottleneck. Though I've tried SSD or HDD write too. Top of the line everything else, MB, sound, etc. How the hell much more power do I need?
Can't believe the FREE 100Kb WinDV can capture for 8 hours + no hiccups, no lost frames, but the second I try to capture, even go into capture mode with VS14 it starts to stall, crash, choke up and eventually reboot the whole F%^&$%^ machine, leaving my 6TB RAID 5 to have to rebuild.
I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect
Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???
How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!
So I have been getting a fatal error "INTERNAL ERROR: !dbobji.cpp@8743: eNotOpenForWrite" when I try to export to 2010 CAD.
I have worked out that it happens when pipes are displayed in the profile view.
Using X5 pro with the updates applied. Over several versions and several years, I developed the habit of converting the video .MOD files created by a JVC camcorder to .mpg before doing any editing using them. For the purpose of this topic, the reasons for that are unimportant. But for the first time, in the last few days I needed to get several basic projects done quickly and elected to bypass this mechanism and work directly with the .MOD files in the edit mode.
And as a result, I am seeing for the first time intermittent crashing of X5 during an edit phase. It's happening on different source files and vsp project files. Never at the same place in a project file, nor during the same action activity. Occurs during clip mode and project mode.
When it happens, the X5 desktop just 'whites out' - the outline of the program desktop is discernable, but barely. The only way out is to kill the program and re-start. Wait long enough and windows will present that option anyway. If one has saved the vsp file (repeatedly) during edit, restart does not lose much. Otherwise - begin again from scratch.
1. SUBJECT: Corel Video studio crashing at sound modification
2. Describe your problem: I just installed corel VS pro 5x ultimate, I also updated with service pack 1. However while making my first video corel keeps crashing when I try to modify "clip volume" then click "play" or click on sound mixer. I get the windows popup stating "corel has stopped responding".
3. What devices are involved and their mode of connection? N/A
4. The Version of program is being used VS X5
5. list all patches/updates that have been installed relating to that version of the program. service pack 1
6. Details of the source files. .avi files captured via the bandicam video capturing software. Music is a simple mp3 downloaded from internet.
7. Project Properties (Alt+Enter)
NTSC non-drop frame (30 fps)
Microsoft AVI files
24 bits, 320 x 240, 30 fps
Upper Field First
Uncompressed
PCM, 44.100 kHz, 16 Bit, Stereo
8. PAL or NTSC
NTSC
9. Error Codes (if any): At what point did the Error occur, during the Editing stage, or after Share – Create Disc The error occurs when I modify the "clip volume" and then hit play or just simply click on the sound mixer.
10. What are you trying to make, burn a Standard DVD, a HD Bluray or Avchd DVD, or Video for the internet. video for the internet
By following these simple rules, you will increase your chances of obtaining a solution to your problem.
If you have not already done so, click on User Control Panel, then go to the Profile tab in the forum header and fill in the fields titled: update your user profile to include your PC specification
System Manufacturer: Alienware
System Model: M18xR1
Operating System: Windows 7 Home premium
System Drive: C
32bit or 64bit: 64bit
Motherboard:InsydeH2O Version 1.0 A04
Processor:Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (8 CPUs), ~2.2GHz
Ram:16GB
Video Card:NVIDIA GeForce GTX 560M
Sound Card:
Hard Drive Capacity:455GB
I've recently got a new computer, and after installing corel on it, I've found that I am unable to open files with corel, as soon as i press the open button corel crashes, but i am able to open the files when i goto the actual file in my documents and click open in there, and i am unable to save files any way whatsoever (due to crashing isues again) i am also unable to export my artwork to a jpeg, also an immediate crash.
View 8 Replies View RelatedI am having massive issues with my brand new version of VideoStudio Pro x4 crashing when I try do to the following : import jpgs, create a video file, upload a file to youtube (it will create the mp4 file but says cannot create the waveform). I am running this on Windows Vista Sony Vaio All in one with a 2.5 ghz processor. I am trying to create a 6 screen split screen video. It also seems to be degrading my vid quality. I tried to submit a case to your support team and both times it says case failed.
The errors I am getting is "unspecified error, send dump file to Corel for analysis."
Then it shuts down.
I am planning to wipe and reload this puter and set it up for Windows 7 , I know I have one issue with uploading ( I have something in the background that is choking my upload speed. yes we have run everything to figure out what it is, when I run it in safe mode I don't have the problem."
The all in one does not have a graphics card but that should not be causing issues with importing jpgs.