I have a full HD video, a 1920x1080 resolution
I need to export video frames to images, jpeg for example, I use "Edit / Take a snapshot" from VideoStudio Pro X4 menu, but this option only exports 1024 x 576 resolution images....Can I export 1920 x 1080 resolution images?
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies View RelatedI have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies View RelatedI'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.
I have taken a short video of a man sitting at a table. There is no movement but the man is talking. A little bit of the microphone can be seen. I tried to take the video into Paintshop Pro X3 to remove this object with smart carver. Is there a way to edit this video so that unwanted objects can be removed from the frames. I have Paintshop Pro X3 on this computer, and PhotoImpact on another computer. Can either of these programs be used to remove objects from frames.?
View 1 Replies View RelatedI have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
I want to create animted GIFs for MySpace profile pictures. The sony camera makes .mpg video files, but no utility I have found will export all the frames to a folders, as image ready, will ONLY import frames from a folder.
View 1 Replies View RelatedI have a 10 frames movie. Can I export each frames into a .png (in a batch)?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I'd like to know if it's possible, and if so, how to do it..... in X5, to insert multiple images into their own single frames, at one time. Say I have images 1.jpg - 250.jpg, and I want all to be loaded into single frames... for an animation.
View 2 Replies View RelatedI am having a difficult time Exporting my 640 X 360 Video In an Mpeg Format, I am making a YouTube Video in 640 X 360 ( 360P I believe the size is called ) only because that is what my source video size is. My original source video is " AVI - 30Fps " I have cut and fine tuned my 8 Second Video that took me 8+ hrs to figure out how to make
Under the Project Properties there are 2 format types available, MPEG and AVI. Under MPEG Project Options --> General, I have only 4 sizes to choose from in the frame size box, 720 x 480 - 704 X 480 - 352 X 480 - 352 X 240, And the user defined selection bullet is GREYED out.
Is it possible that because im using the trial version that I just cannot fully use the software, If so then I can go back and install my VideoStudio X4, I was hoping to Upgrade to X5 because I can directly import my Paint Shop Pro Layers as well as CorelDRAW too.
My Corel VS X6 Pro is crashing during a MPEG-4 1920x1080 export at 69% complete. Happened twice in a row. The error message refers to this dump file. I have been able to export this same video before, this just started happening.
I tried to add the dump file as an attachment but the .DMP extension is not allowed.
Videostudio X3 crashes everytime I try to export a video. It doesn't matter the file type inputed or how you are trying to export it. It even crashes when trying to export one of the default title screens included with the program. Have tried a clean install with no luck. I have also insured I am using the latest version.
View 5 Replies View RelatedI want to export a series of images from a video, but only, say, one frame every three or four seconds. One out of every 90 to 120 frames of the video. Can this be done in AE, or do I need to do this in another CC program?
View 5 Replies View RelatedI have already more than 100 projects running under VS X4 it is problematic to jump to other software, also because of spending 2 years studying Corel VS.I have found now (2 years to late) the top very stable professional software with Edius 6.06.
What happens.... In new installed VS X4 if i put a videofile on the timeline and go to SHARE >MAKING VIDEOFILE MENU....the computer breaks down, and gives the error: " VS X4 does not work anymore..... " and stops working, realy breaking down....
Have tryed it lots of times, it looks like at installing the program, the link to the output formats is not there and VS X4 does not now how to handle.....Yes I am going over to the professional software edius 6, but with a usermanual with 1000 pages i need studying at least one year on that....
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
I've been searching and trying to see if there's a way that I can make my video right under 500mb, basically so I can have the best quality possible but still be under Vimeo's 500mb upload limit. It's not a long video, it's slightly under 2 minutes, but I've tried about 10 different export options and they're either around 100mb and the quality is awful, or they're gigantic files.
Is there a way that I can set it to close to 500mb? I'm using Video Studio Pro X5.
How do I export my video to 720p mp4 file format?
I can't find the option. In fact I can't find many options. The custom settings are not very custom really as the choice is very limited or none.
Is it possible to export a part of the timeline to a new video file?
So if I have a 10 min video in the timeline, I would like to "mark in" and "mark out" from 3m02s to 5m30s, and create a new file.
I used to use Edius I could mark in and mark out from time to time and export to a new video file. Is there a workaround in Videostudio ?
I'm editing a training video, and would like to export different "chapters" to seperate video files, so I can upload the seperate videos to the web, and not have to export the entire video, as this would be too big.
I am using Lightroom 5 also to color grade some of my short videos as it seems to be pretty handy. Unfortunately, for some videos the export fails with the error that the hard drive does not contain rendered images. The screenshot below shows the error message in German.
As I was using the same options for many other videos before, I was wondering what causes this error. The hard drive where I have the lightroom catelog is an external USB3 hdd with lots of space left.
I must have clicked a button in VideoStudio Pro 5 and suddenly I have dots all over my images and video clips. The video plays with audio and titles but no images!
View 1 Replies View RelatedThis is a new fault which has appeared with Corel Pro x3. When I play clips on the overlay tracks as a project they play faultlessly. When I play them as a clip on any overlay track, there is no sound and it stutters instead of one constant speed. I have installed the program twice now trying to fix this problem. I am editing in Standard Definition. What could be causing this problem? This occurs with all files on the overlay tracks played in clip mode.
My computer is a Pentium (R) D CPU 3.00GHz, 3.25GB of RAM, Windows XP Pro, Intel Motherboard, ATI Radeon HD 5450, 512MB DDR3, IDT Audio. Sony HVR-V1P Pan NVGS400
I just started using the trail version of the VideoStudio Pro software today. I am trying to modify a .avi video file. The movie "clips" play fine, but whenever I play the project, there seems to be compression of the video or something- it the video just becomes unclear and fuzzy. It is not sharp. I'm not sure if it's because it's too big or if I have the wrong settings.
how to superimpose animated clips/gifs/images onto a video?
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
Earlier today I tried making a gif and while importing the layers I wasn't able to click play to preview the section I wanted to import because this popup appeared:
And I while I ignored it the first couple times I think it also affected the video frames since the the last ones seemed the same frame repeating over and over.
what does it mean and if there's a way to fix it?
On CS5 and CS6, I've easily been able to make gifs, but now in my CS4 extended, there is no option under IMport to do video frames to layers. I also can not open ay gifs or get the animation toolbar.
View 3 Replies View RelatedI'm trying to import an avi file into PS CS3 using the 'import video frames into layers' tool, and I had 3ivx trial but it expired and now it leaves a watermark on all the layers.
View 2 Replies View RelatedI have a video shot on a webcam on 720 resolution and 15 frames per second. When I import it into premier I can't find a 720 setting at 15 frames.
View 10 Replies View RelatedThis used to work, but now I can't find any way to import videos into Photoshop to make GIFs. When I go to import a video, mp4s are greyed out but I can still select avi files.
When I select an avi file, the preview comes up blank. When it imports, every layer is black. This feature used to work perfectly, but now it won't work at all! The avi files play fine in Quicktime Player, for which I have the Perian add-on.
I forgot to switch the frame rate from 29.97 to 12 fps when I started working on an animation and when I switched to 12 fps mid-project the frames changed.
I have a hard time describing exactly what's going on so I'll just post a screenshot instead. Basically each frame has a gap in between and I am unable to line up the frames back to back. I was hoping to find out how to fix it so the frames play back to back seamlessly without any gaps. But yeah, when I attempt to align the frames back to back it won't let me, instead the frames overlap halfway or have this gap in between.
When I play the video from "importing video frames into layers" the audio doesn't come out anymore.
View 1 Replies View RelatedWhen importing a rather large file, it is taking the space up on my C: drive which is an SSD and doesn't have a ton of room. By chance, is there a way to change it, so that photoshop will use the space on my secondary drive instead?
View 1 Replies View Related