VideoStudio :: X5 - Can't Export 640 X 360 In MPEG Video
Apr 26, 2012
I am having a difficult time Exporting my 640 X 360 Video In an Mpeg Format, I am making a YouTube Video in 640 X 360 ( 360P I believe the size is called ) only because that is what my source video size is. My original source video is " AVI - 30Fps " I have cut and fine tuned my 8 Second Video that took me 8+ hrs to figure out how to make
Under the Project Properties there are 2 format types available, MPEG and AVI. Under MPEG Project Options --> General, I have only 4 sizes to choose from in the frame size box, 720 x 480 - 704 X 480 - 352 X 480 - 352 X 240, And the user defined selection bullet is GREYED out.
Is it possible that because im using the trial version that I just cannot fully use the software, If so then I can go back and install my VideoStudio X4, I was hoping to Upgrade to X5 because I can directly import my Paint Shop Pro Layers as well as CorelDRAW too.
View 7 Replies
ADVERTISEMENT
Jun 8, 2012
I want to render a video that consists of two parts: A small intro (8 sec) and a video (~2min). I want to render it on iPhone 4/iPad HD (720p). Now, after rendering the intro (~9%) the program crashes with the message "Corel VideoStudio Pro X4 doesn't respond..." System Specs in profile.
View 2 Replies
View Related
Aug 19, 2012
I was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
View 3 Replies
View Related
Jun 28, 2011
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
View 2 Replies
View Related
Apr 15, 2013
My Corel VS X6 Pro is crashing during a MPEG-4 1920x1080 export at 69% complete. Happened twice in a row. The error message refers to this dump file. I have been able to export this same video before, this just started happening.
I tried to add the dump file as an attachment but the .DMP extension is not allowed.
View 6 Replies
View Related
Jan 6, 2011
Videostudio X3 crashes everytime I try to export a video. It doesn't matter the file type inputed or how you are trying to export it. It even crashes when trying to export one of the default title screens included with the program. Have tried a clean install with no luck. I have also insured I am using the latest version.
View 5 Replies
View Related
Oct 22, 2012
Why I can not import MPEG-2 video file into PH CS 6?
View 3 Replies
View Related
Jun 23, 2012
I have already more than 100 projects running under VS X4 it is problematic to jump to other software, also because of spending 2 years studying Corel VS.I have found now (2 years to late) the top very stable professional software with Edius 6.06.
What happens.... In new installed VS X4 if i put a videofile on the timeline and go to SHARE >MAKING VIDEOFILE MENU....the computer breaks down, and gives the error: " VS X4 does not work anymore..... " and stops working, realy breaking down....
Have tryed it lots of times, it looks like at installing the program, the link to the output formats is not there and VS X4 does not now how to handle.....Yes I am going over to the professional software edius 6, but with a usermanual with 1000 pages i need studying at least one year on that....
View 2 Replies
View Related
Jul 8, 2013
I have registered my product. When I log in, I see it in the list.I have no "Support code".I have spent 20 minutes trying to figure out how to send them the dump that the program says I should send them so they can find their problem.
In general, I'm very happy with CVS. I've used X5 and just bought X6. So I'm not a whiner.Get it together for support.When you put so many roadblocks in the way of sending you a bug report, you reduce the quality of your product.If you are going to have such a difficult support policy, then the program should have sent the dump automatically to you.
View 3 Replies
View Related
Jul 27, 2012
I've been searching and trying to see if there's a way that I can make my video right under 500mb, basically so I can have the best quality possible but still be under Vimeo's 500mb upload limit. It's not a long video, it's slightly under 2 minutes, but I've tried about 10 different export options and they're either around 100mb and the quality is awful, or they're gigantic files.
Is there a way that I can set it to close to 500mb? I'm using Video Studio Pro X5.
View 6 Replies
View Related
Jan 29, 2013
I have a full HD video, a 1920x1080 resolution
I need to export video frames to images, jpeg for example, I use "Edit / Take a snapshot" from VideoStudio Pro X4 menu, but this option only exports 1024 x 576 resolution images....Can I export 1920 x 1080 resolution images?
View 1 Replies
View Related
Dec 20, 2012
How do I export my video to 720p mp4 file format?
I can't find the option. In fact I can't find many options. The custom settings are not very custom really as the choice is very limited or none.
View 2 Replies
View Related
Apr 13, 2012
Is it possible to export a part of the timeline to a new video file?
So if I have a 10 min video in the timeline, I would like to "mark in" and "mark out" from 3m02s to 5m30s, and create a new file.
I used to use Edius I could mark in and mark out from time to time and export to a new video file. Is there a workaround in Videostudio ?
I'm editing a training video, and would like to export different "chapters" to seperate video files, so I can upload the seperate videos to the web, and not have to export the entire video, as this would be too big.
View 2 Replies
View Related
Nov 23, 2012
Is it possible to load a MPEG-2 TS-video (.ts) file in the Program Adobe Photoshop Element 10, until now the program refuse to load such a file and do not recognize is. I have some films loaded from satellite TV and like to remove the commercials, that is the reason that i buy this program.
View 1 Replies
View Related
Feb 15, 2013
MPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies
View Related
Oct 4, 2011
If I render a Videostudio-file of 15 minute in .mpeg, it is about 750 000 great, if I render it in .mp4 it grows to 1.200 000, why?
View 5 Replies
View Related
Apr 24, 2011
I know there must be a thread or post about the best MPEG settings when you are going through the steps to burn a DVD, but did a search and came up with nothing.
Those items in bold are checked in X4.
In the MPEG properties
● Do not convert
● Support X-Disc
● Two pass conversion
● Treat MPEG audio as non-DVD compliant
● Auto fade
● Play all
● Auto repeat
Lower field first?
Under Change MPEG settings/Customize do any of you change anything? General Tab and Compression? I know to move the slider under compression to 100%. Not sure about the rest.
View 6 Replies
View Related
Oct 30, 2010
I'm a recovering Roxio user. 6 years. Finally fed up with 2011 crashing everytime I tried to convert DVD to MPEG4. I just downloaded VS Pro X3 and how to do this. I'm assuming it can be done on this program.
View 1 Replies
View Related
Dec 3, 2013
When I burned an AVI (that I captured with VS X4) to a single layer dvd VS does the job, except that when I palce the dvd in my living room Sony player I have the following error message : The disk is dirty. I tried twice with the same result! When I capture directly to the mpeg format and then burn a disk I have no problem.
How I could convert AVI to MPEG (no menu, no edition) in a simple way?
View 4 Replies
View Related
May 26, 2013
I am using VS X6 ultimate that I purchased yesterday
I am capturing videos from VHS tape using an S-Video connection
I have tried different capture options settings and the capture always saves in MPEG
I believe that AVI has the least loss and would prefer to save in the AVI format since I intend to do some editing of the original content The end objective will be to burn reults to DVD
Can VS X6 capture files in AVI? If so, what settimgs should I use? Any settings that would be best for this type of transfer to HDD?
View 3 Replies
View Related
Oct 25, 2010
Capturing VHS to MPEG? Does this tutorial work?
[URL]
View 4 Replies
View Related
Apr 7, 2011
I did a ton of research on Video Editing software and decided to try VS Pro X4 first due to it's ease of use (good for me) and capabilities that I can grow into. So far I would say the experience has been positive and feel I could happily settle in with VS Pro X4 for the long haul, but have just a couple of questions I would like to resolve first. They may not be issues at all, but more due to my lack of knowledge, but figured experienced users like yourselves would be able to determine that in short order.
I've split my questions into separate (3) threads so that people don't have to suffer through content they're not interested in. Here's a brief run down on where I'm at and what I'm trying to do.
I'm about half-way through my 30day trial of VS Pro X4, and starting to feel a little more comfortable with the software, but a few things are still puzzling me. Granted I've only scratched the surface of the SW capabilities so far.
I'm a complete newbie to this digital video stuff, however I'm not a complete newbie to computers. Basically I have a shoeobox of old 8mm camcorder tapes (analog) and have finally decided to take the plunge and digitize them, mainly because we never end up watching the tapes 'cause it's such a pain.
First question; A friend of mine is letting me borrow his ADVC300 converter, connected to a Firewire400 card in my PC. VS Pro X4 capture works fine, was able to capture an entire 8mm tape. It was an entire tape because that's the way it was taped, it was a music performance so the tape ran through the whole show. I was able to add a simple title and burn to a DVD disc. What should I expect for MPEG compression when burning to a DVD? I couldn't fit it all on one DVD disc, had to split it into two discs, not a big deal, just thought the mpeg conversion would have compressed it more? Maybe that's wishful thinking on my part? It's a 2 hour & 2minute video which equals a large ~8.7Gb raw DV capture file through the ADVC. I know a DVD is 4.7Gb max so obviously the 8.7Gb raw file won't fit, but is 2:1 compression/conversion expecting too much for the mpeg conversion? Maybe there's some options I should be using to compress it more?
All in all I'm pretty happy with the ADVC to digital capture functions with VSPx4 so far.
View 8 Replies
View Related
Mar 1, 2011
Is it possible to Capture in MPEG FORMAT with Pro X4?
It was possible with Pro X2 but not with Pro X3.
View 2 Replies
View Related
May 3, 2012
I'm testing demo version of this product and I would like to know how to change output parameters of mpeg-4 codec (Share->Create Video File->MPEG-4-> MPEG-4 HD). I live in Europe and my video source is Full HD 25fps, but Video Studio's mpeg-4 codec has only parameter constants 30fps.
View 5 Replies
View Related
Apr 17, 2012
Today I use a dvd maker freeware program...load this mpg file and it creates the dvd folder and I create the image from that. Total size is 4.2 and it reports using 94% of the dvd available space. Freeware program puts in extra screens advertisements so can't use it.
I attempt to use the share-create disc and import same mpg file and it reports in the bar that its 6.48GB. To me this is a problem and I can't understand why it reports it as 2.2GB larger than the actual file size. There is no menu its from a new project, nothing imported to the timeline, just open, create, import and my OS and every other program must be reporting it wrong.
View 1 Replies
View Related
Nov 6, 2010
I have about 30 files with the extension .vsp. As it turns out, I can only convert two of them to .mpeg. I'm trying to figure out why that is by looking at every single detail I can to figure out why only two of them can convert but none of the other ones will be accepted. i just get an error message each and every time. The error message says that there is a file mismatch.
View 10 Replies
View Related
Jun 14, 2012
I just moved from a Sony HDV (HDR-HC3) camcorder to a Panasonic AVCHD one (HC V700). When rendering my final video, I've always used MPEG-4 HD. This new camcorder records in AVCHD. I'm not sure if I should be outputting to MPEG-4 HD or AVCHD. Before I had issues rendering in AVCHD, which is why I didn't use it.
What's the main differences in MPEG-4 HD vs. AVCHD? What are the advantages and disadvantages? Which one is better and the one I should use?
View 6 Replies
View Related
Mar 6, 2013
I have been using Pro 4X for just over a year now but have recently been experiencing crashes while encoding HD MPEG files. I have also just activated/unpacked the included music with the software and these issues just started after I did this. Note: I do not use the provided music but believe the conflict is because of this.
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:14.0.0.0
[code]....
View 1 Replies
View Related
May 7, 2012
Working with family project (captured by someone else-not me). Gist is that the raw AVI file doesn't have any sound when I play in media player or VSX2. The avi video format shows up as mpeg4s Decoder DMO and the audio as "Unknown ACM Format". I naively used this to make an mpeg vid file and tried to tweak the audio using LPCM but the resulting file has no audio either. The avi shows the video compression as mpeg4 but when I use my mpeg4 converter it doesn't recognise it so it's obviously an avi file with an mpeg4 video compression used.
Is there any way to recover the audio in these circumstances?
View 5 Replies
View Related
May 8, 2010
Up until recently I had been able to capture a VHS movie using the ADVC-110, edit the avi files and put in transitions, save to a vsp file. Next I would go to Share> Create Video File> Custom. Since this an old movie of only fair quality I would select a bitrate of 6000. I was previously able to render 3 different movies of approx. 70 minutes in lenghth to mpeg-2 in 1 1/2 hours each. Now it suddenly takes 6 to 8 hours per movie. The cpu will go like gangbusters and render the first 50% of the movie in just 20 minutes, and then slow down and take hours for the last 50%. I have Spy Sweeper and other running progs. and apps. shut off, screen saver disabled, internet connection off and D-Link not in use. I am using my "D" drive for all my files, which has nearly 1 TB, and I have plenty of available memory. what causes it to slow down, and what I might try? OS: XP; MB: ASUS P5QL-E; GC: NVIDIA GeForce 9500 GT; SC: Real tek High Def Audio; Processor: Intel 2 Core Duo @ 3.33 GHZ; Hard Drive: C: 300 GB, D: 1 TB; Memory: 3GB.
View 2 Replies
View Related
Feb 20, 2013
My footage are .mts files and edited to .vsp files with "Lower Field First" with VS X4. I have no problems in converting to video files using "Same as Project Settings". Now I wanted to try with "MPEG Optimizer" and the resulting settings given by VS X4 are:[
View 8 Replies
View Related
