I am using VSX5 Ultimate. I installed a program called drop box and another called Helium. After installing these programs, VSX5 will no longer load. The intro screen does not even come up. I click on my short cut and my mouse pointer spins for a few seconds, then nothing. I have checked my programs and I do not have browser protect, browser manager or babylon. I uninstalled the two programs I mentioned above and restarted my computer but nothing happens still. Should I try uninstalling VSX5 and reinstalling?
I had a problem with bridge CS6 dynamic link failing and had tech support finally discuss the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6. I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged.
I tried image processor in bridge to make them PS files and got the following error message.I tried to load one of the CR files from the finder dirretly and got the following error message.
I have a project that suddenly won't load. I have 25 versions of it, I save it under a new file name each time in case I need to go back to an older version.
Trouble is most of the versions won't load! Only the very early versions will load. Some of the later version start to load then disappear.
Hardware hasn't changed on the PC, maybe the video drivers have been updated, thats about it.
I have a video which is much longer than any software indicates. YouTube says it is 18 minutes long, Windows says it is 49 seconds long, Windows Media Players says it is 49 seconds long, Windows Live Movie Maker says it is 50 seconds long, and Corel VideoStudio says it is 49 seconds long. The video is too long for YouTube, but I cannot edit the length with VideoStudio or Windows Live Movie Maker because it does not acknowledge the true length of the video!
Video extension: Originally .vob, but I changed it to .mpeg to edit in VS (I've done many times before, never caused an issue).
On a pro account, Vimeo has no time limits. Yet using the tool to upload to Vimeo in VS X4 forces a trim to 25 minutes. Is there a work around? Is there any way to replicate the settings on the Vimeo upload without the time limit? I can't seem to find a way to replicate the Vimeo upload settings using the custom portion, or the mp4 HD portion of the share tab.
A curious thing I have just noticed is that I no longer have any DivX showing as an AVI option under Custom in either X5 or X6. Don't get me wrong: I know all about the DivX woes of other users here. But on this same computer, I have always been able to update to the latest version of DivX and use it with no problem. Today I updated DivX to the very latest version, and went to make sure it showed in VS, but it was not there in either X5 or X6. Nor can either program "see" DivX clips I have stored on the computer.
A few weeks ago, I was having trouble getting X6 to see the various proDad and Boris filters added in the Ultimate package. That was eventually resolved, but in the process I had to uninstall and reinstall both versions. Something else obviously happened then and I am pretty sure it removed the DivX capacity, since all I have now showing under the AVI Compression option, apart from uncompressed, is DV Types 1 and 2, and the MJPEG codec. I used to have a lot more, including, apart from DivX, Cinepak, Microsoft mpeg-4 V1 and V2, ffdshow, Intel IYUV and XVid.
FYI, I have tried renaming the 15.0 and 16.0 folders in Win 7 C:Documents and Settings[My Name]Application DataRoamingUlead SystemsCorel VideoStudio Pro I realise that is mainly to do with repopulating the filters, but thought I would give it a go.
I also re-loaded an older version of DivX which I know had previously worked in X5, though I had never checked it in X6 (8.2.2). That did not work either, including after a reboot.
Also FWIW, I uninstalled XVid, which had previously showed up in X5, and reinstalled it. But it still does not show in either X5 or X6, including after a reboot.
FWIW, I have also checked on another computer on which I have X5 (though not X6 yet) loaded, and that has all the AVI filters mentioned above as missing, plus a variety of others specific to that computer (related to a Matrox program I have loaded on it).
I never had a problem exporting my projects as Quicktime MOV files until a few months ago. Now it seems when I create a QT file they come out blurry/ fuzzy/unusable. I have uninstalled/reinstalled VSPX3 and QT (and have tried to do it on several computers) but nothing has worked.
Having a problem with VS x4. For some reason, when trying to open, a windows 7 dialogue box appears asking " do you want the following program to make changes to the computer?" Program: Corel File: hard drive on computer.
Unable to click "no". Click "yes" the dialogue box disappears. When trying to open program afterwards, the same box appears.
I can't put video thumbnails into the library. I had deleted previous projects from the library and now the library won't accept anything - even new captures. I can add titles-just not anything into "samples".
I saw a thread that had something to do with X4 and .mp4 issues involving some other software or something? I'm using barebones X3 and when trying to add some .mp4 files, X3 crashes. Some of them work and are added to the library, but most do not and crash X3.
Videostudio 11+ won't load any .avi files,it just gives the message 'catastrophic failure'. Even if I scan the dv tape with the program it will save the files as avi but it still won't let me use them.
I have VS12. I downloaded the trial version of X5, mainly to see if it could read my VS12 files. It could. I used X5 to render a VS12 file that had continually crashed when I tried to rendered it with VS12. Not only did it render it successfully, but it did it about twice as fast as VS12 - great. However, that was yesterday. Today I've been trying to reload the original file into X5 again & I just get the message "File xxxx is already in use". Running X5 by double-clicking on the file, running X5 first & clicking the filename from the file menu or clicking Open from the file menu & selecting the file from the list - all give that result. The only way I have loaded the file is to run X5 & drag the file to the timeline. The file has opened, but the project is shown as untitled, even though there is a title. Also the project is shown as a single entity on the timeline, not made up of individual frames & captions. Where has my project gone? Is it still in X5? I've tried to open other projects, & they all give the same message! I can't try out my trial version I it won't load my projects!
PS I've just spent a few minutes holding the mouse pointer over various icons on the X5 screen & clicking a few to see where I got. After that, I had another go at loading the file - & it loaded successfully!! I assume when I loaded X5, it came up in some mode & I managed to get it out of it.
I've been using this product for a few weeks and this morning it stopped working. Searched the forums, applied all of the fixes. Manually uninstalled, re-downloaded, reinstalled and still crashing on application loading. 6 hours of pure frustration. Never had an issue with X4. before I completely uninstall and purchase a new video editor?
what does this message mean: "Load from stream error"? It appears all the time and I cannot put any picture in the timeline. Some pictures are white with two black crossed lines.
I've a large number of DV AVI (Type 2) files I've edited several times using VS. But in the last couple of days X3 has stopped loading them into the project timeline. I suspect I have inadvertently deleted, or unlinked, the Type 2 codec. Strangely, the files play OK with Media Player, it's just X3 that's refusing to work! I've reinstalled X3 but that's not made any difference. How do I identify the codecs available?
I created a 30min video, with a lot of photos mixed with live video, transitions, music, etc. Now, when I try to reopen the file for futher editing, it appears the software needs to re-render all the thumbnails in my video track stream. As I mentioned, I have a lot of photos in there, so it's taking forever.
With the previous software I used (Pinnacle Studio), I could flush the cache and have the program rebuild (and store) all the thumbnail info for faster loads in subsequent sessions.
The Place Holders do not load as they did in the past. This is with the new VS Pro X6 that I just got. How can I load them so as to be useful? In X5 I used to just open the folders and they would load.
I first tried capturing the video from a Sony camcorder but VS keeps freezng up on "change field order". So then I just downloaded the files to my computer and tried to load them that way. But the program does not see MTS files in the folder.
I just installed Video Studio Pro x5. When I load a .avi video it doesn't play. When I click play after I imported the file, the screen is black. If I play the avi in windows it works. How to get it visible so I can edit it it in x5?
I use X5 Pro. I have some projects with lots of video clips. When I load a project, the project itself loads fairly quickly (as indicated with the green progress bar), but the Icons in the Project area then begin loading ONLY for the page being displayed. This applies for both the storyboard and timeline view. This is very frustrating, especially on the storyboard view, because every time I scroll a page I have to wait for the icons to load. With a lot of pages, it takes a very long time to get everything loaded.
Is there a way to either speed up the loading process or have it load in the background so that I can leave the computer and come back later to find the icons all loaded, rather than having to sit there and scroll through one page at a time waiting for each page to load until all pages are loaded?
Along with giving me a failure after closing telling me to send my dmp file to Corel, but Corel not showing me anyway to do this, my newest error is the best one yet. The program opens with a little window saying "Load from Stream Error" and an OK button. The OK button does nothing. Nothing else can be used. The computer is totally locked up with this wonderful piece of unfinished program in place. My only recourse is to power the computer off manually to restart it. starting VS"pro"4U just locks it down again. Is there a way to clear this without following Corels instructions for every problem. That being to remove and reload the program. The next time I remove it will be to throw it and it's boxed installation disk in the trash can, then go out and buy something a bit more reliable. Like Adobe's little girl Premier, or Sony's video editing program.
This looks so nice, if it just worked. I have quite a few hours into a video and just wanted to add a new title when this started.
For some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
I have split the audio from the video track and I am now trying to "lift" a copy to put through a sound editor. I then intend to replace the original audio track. (or to put on audio track 2 and mute 1). I haven't as yet found a way to lift the audio track and load into a separate file.
How can I remove libraries without causing Load Stream Error. Should I delete all the contents first? I have created several libraries for my individual projects but whenever I have finished with one and try to remove (delete) it I get this error message and have to reset to factory defaults. This means losing the libraries I still want to use.
Error message showing on Video Studio Pro X2 - when go into edit, pop up message dispays 'Load From Stream Error' which then doesn't allow me to anything further.
