I have VS12. I downloaded the trial version of X5, mainly to see if it could read my VS12 files. It could. I used X5 to render a VS12 file that had continually crashed when I tried to rendered it with VS12. Not only did it render it successfully, but it did it about twice as fast as VS12 - great. However, that was yesterday. Today I've been trying to reload the original file into X5 again & I just get the message "File xxxx is already in use". Running X5 by double-clicking on the file, running X5 first & clicking the filename from the file menu or clicking Open from the file menu & selecting the file from the list - all give that result. The only way I have loaded the file is to run X5 & drag the file to the timeline. The file has opened, but the project is shown as untitled, even though there is a title. Also the project is shown as a single entity on the timeline, not made up of individual frames & captions. Where has my project gone? Is it still in X5? I've tried to open other projects, & they all give the same message! I can't try out my trial version I it won't load my projects!
PS I've just spent a few minutes holding the mouse pointer over various icons on the X5 screen & clicking a few to see where I got. After that, I had another go at loading the file - & it loaded successfully!! I assume when I loaded X5, it came up in some mode & I managed to get it out of it.
Videostudio 11+ won't load any .avi files,it just gives the message 'catastrophic failure'. Even if I scan the dv tape with the program it will save the files as avi but it still won't let me use them.
I have split the audio from the video track and I am now trying to "lift" a copy to put through a sound editor. I then intend to replace the original audio track. (or to put on audio track 2 and mute 1). I haven't as yet found a way to lift the audio track and load into a separate file.
I have a project that suddenly won't load. I have 25 versions of it, I save it under a new file name each time in case I need to go back to an older version.
Trouble is most of the versions won't load! Only the very early versions will load. Some of the later version start to load then disappear.
Hardware hasn't changed on the PC, maybe the video drivers have been updated, thats about it.
Having a problem with VS x4. For some reason, when trying to open, a windows 7 dialogue box appears asking " do you want the following program to make changes to the computer?" Program: Corel File: hard drive on computer.
Unable to click "no". Click "yes" the dialogue box disappears. When trying to open program afterwards, the same box appears.
I can't put video thumbnails into the library. I had deleted previous projects from the library and now the library won't accept anything - even new captures. I can add titles-just not anything into "samples".
I saw a thread that had something to do with X4 and .mp4 issues involving some other software or something? I'm using barebones X3 and when trying to add some .mp4 files, X3 crashes. Some of them work and are added to the library, but most do not and crash X3.
I am using VSX5 Ultimate. I installed a program called drop box and another called Helium. After installing these programs, VSX5 will no longer load. The intro screen does not even come up. I click on my short cut and my mouse pointer spins for a few seconds, then nothing. I have checked my programs and I do not have browser protect, browser manager or babylon. I uninstalled the two programs I mentioned above and restarted my computer but nothing happens still. Should I try uninstalling VSX5 and reinstalling?
I've been using this product for a few weeks and this morning it stopped working. Searched the forums, applied all of the fixes. Manually uninstalled, re-downloaded, reinstalled and still crashing on application loading. 6 hours of pure frustration. Never had an issue with X4. before I completely uninstall and purchase a new video editor?
what does this message mean: "Load from stream error"? It appears all the time and I cannot put any picture in the timeline. Some pictures are white with two black crossed lines.
I've a large number of DV AVI (Type 2) files I've edited several times using VS. But in the last couple of days X3 has stopped loading them into the project timeline. I suspect I have inadvertently deleted, or unlinked, the Type 2 codec. Strangely, the files play OK with Media Player, it's just X3 that's refusing to work! I've reinstalled X3 but that's not made any difference. How do I identify the codecs available?
I created a 30min video, with a lot of photos mixed with live video, transitions, music, etc. Now, when I try to reopen the file for futher editing, it appears the software needs to re-render all the thumbnails in my video track stream. As I mentioned, I have a lot of photos in there, so it's taking forever.
With the previous software I used (Pinnacle Studio), I could flush the cache and have the program rebuild (and store) all the thumbnail info for faster loads in subsequent sessions.
The Place Holders do not load as they did in the past. This is with the new VS Pro X6 that I just got. How can I load them so as to be useful? In X5 I used to just open the folders and they would load.
I first tried capturing the video from a Sony camcorder but VS keeps freezng up on "change field order". So then I just downloaded the files to my computer and tried to load them that way. But the program does not see MTS files in the folder.
I just installed Video Studio Pro x5. When I load a .avi video it doesn't play. When I click play after I imported the file, the screen is black. If I play the avi in windows it works. How to get it visible so I can edit it it in x5?
I use X5 Pro. I have some projects with lots of video clips. When I load a project, the project itself loads fairly quickly (as indicated with the green progress bar), but the Icons in the Project area then begin loading ONLY for the page being displayed. This applies for both the storyboard and timeline view. This is very frustrating, especially on the storyboard view, because every time I scroll a page I have to wait for the icons to load. With a lot of pages, it takes a very long time to get everything loaded.
Is there a way to either speed up the loading process or have it load in the background so that I can leave the computer and come back later to find the icons all loaded, rather than having to sit there and scroll through one page at a time waiting for each page to load until all pages are loaded?
Along with giving me a failure after closing telling me to send my dmp file to Corel, but Corel not showing me anyway to do this, my newest error is the best one yet. The program opens with a little window saying "Load from Stream Error" and an OK button. The OK button does nothing. Nothing else can be used. The computer is totally locked up with this wonderful piece of unfinished program in place. My only recourse is to power the computer off manually to restart it. starting VS"pro"4U just locks it down again. Is there a way to clear this without following Corels instructions for every problem. That being to remove and reload the program. The next time I remove it will be to throw it and it's boxed installation disk in the trash can, then go out and buy something a bit more reliable. Like Adobe's little girl Premier, or Sony's video editing program.
This looks so nice, if it just worked. I have quite a few hours into a video and just wanted to add a new title when this started.
For some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
How can I remove libraries without causing Load Stream Error. Should I delete all the contents first? I have created several libraries for my individual projects but whenever I have finished with one and try to remove (delete) it I get this error message and have to reset to factory defaults. This means losing the libraries I still want to use.
Error message showing on Video Studio Pro X2 - when go into edit, pop up message dispays 'Load From Stream Error' which then doesn't allow me to anything further.
noticed alot of people with C4D, so i decided to download it, just so i can make my pictures look even better, now i was wondering how people get a C4D image on to photoshop...
I've been found a bit of a problem, when I try to assign an IES file to a light MAX Design hard crashes. The odd part is that when I open the IES file in 3ds MAX, not Design, it loads correctly. I've installed all the updates but it still happens.
I've attached the IES files in question, how can get it to work.
Edit- apparently I can't attach the IES files for some reason.
I have loaded a material library file to material editor. Now every time open a file and I open the material editor I found those material libraries loaded, I don't want those files now, how do I can unload them?
In LR4, I was able to create a gpx file on my iPhone while on a photowalk using the "Trails" application. When done the walk, I would email myself that tracklog and save it on my desktop. Using LR5, I can select my gpx file on the desktop, but it does not load. Nothing happens. In LR4, it would show my route on the maps screen and I could auto tag images. But not in LR5.
How can I get LR to read my track logs again so that I could auto tag my photographs.
I ensured that the camera and iPhone clock were both synchronized before the walk.
I try to load my menu at application start. But I can't see this menu in the menu bar after start. I see menu only after I "reload" current workspace in user interface customization dialog.
const String myCuiFile = @"D:Visual Studio 2005ProjectsAutoCAD 2008Cuisits.cui"; public void Initialize() { String currentWorkSpace = (String)Application.GetSystemVariable("WSCURRENT"); CustomizationSection acadCustomSection = new CustomizationSection((String)Application.GetSystemVariable("MENUNAME") + ".cui"); if (acadCustomSection.PartialCuiFiles.Contains(myCuiFile) == false)
I am using PS CS3 (Windows Version) on my laptop while traveling. Last night the Adobe update manager updated to Camera Raw 4.6. Now Photoshop will not load any photo. If I go to File Open and choose even a small jpg, I get the hour glass and it PS hangs up. When I open the task manager, it shows that PS is not responding. Bridge works, but when I click on "Open Image", PS launches, but hangs up just like when I try to open a file.
