I am using PS CS3 (Windows Version) on my laptop while traveling. Last night the Adobe update manager updated to Camera Raw 4.6. Now Photoshop will not load any photo. If I go to File Open and choose even a small jpg, I get the hour glass and it PS hangs up. When I open the task manager, it shows that PS is not responding. Bridge works, but when I click on "Open Image", PS launches, but hangs up just like when I try to open a file.
I have tried every way possible. The short cut, photos, and psd. files and nothing. So I thought, maybe I should uninstall it and reinstall it. Nope! And I even ran Ccleaner, disk clean up and a rgistry cleaner/fixer uper and restarted before reinstalling. It will start to load and then it just drops off with no error message. Not sure what else to try. I have 91% empty space on a 250MB hard drive and more than enough memory so I dont think this is an issue. I havnt made any changes or installed anything that may have caused an issue.
MY photoshop was working fine up until a week ago. Then get gave me this error message. "Unable to continue because of hardware or system error. Sorry, but this error is unrecoverable". The error pops up when photoshop is loading "building color convertion tables" or something to that effect. It is not the fonts becuase I have not installed any new fonts, have defraged my hardrive. I have used FontDoctor, and all my fonts are fine. The only thing that i did do is install the new directx june 2006, and the new NVIDIA drivers. I uninstalled my Nvidia drivers but problem still persists, please I am desparate for help, formating my hard drive is not an option. I have reset the prefs both via ctrl, atl and shift, and searching for the psp file and deleting it manually, same problem pops up. I installed Photoshop cs and I recieve the same error message. I can however run and use ImageReady.
I used to able to double click on an image in bridge and it would come up in ps. It doesnt do anything now. I have cs3 and bridge and i havent changed anything...
i noticed it said that Com surrogate 6.0 was default...
i have read through several other threads an nothing suggested seems to work when i attempt to open a particular psd it tells me file cannot be opened because it is not compatible with this version of photoshop. it was built in cs3 and worked like 5 hrs before i tried to open it to work on it didn't save it when i opened it the last time(as in i just opened it on my pc to show some one n closed it )
While trying to load a photo from catalog in Lightroom 4 Develop Module, load fails and I get message "an unknown error occurred." What does this really mean, what is the fix? Using PC and Vista.
noticed alot of people with C4D, so i decided to download it, just so i can make my pictures look even better, now i was wondering how people get a C4D image on to photoshop...
I'm working with a friend who's got perhaps unusual Photoshop needs. He's working on a 10000x20000 pixel 16 bit image with maybe 6 image layers and 12 total layers. Loading the file takes about 20 minutes.
The system is a 2.6 GHz quad-core i7 with 12 GB RAM and a 32GB SSD primary scratch, 200 GB of secondary scratch, with a 1 GB Radeon HD 4870, running CS4 64bit on Vista 64.
What seems odd to me is that memory usage climbs steeply for the first perhaps 4 GB, looking like the load might complete in a minute or two, then the CPU kicks in for the long, long remainder of the load. The file on disk is roughly 5 GB.
We've got issues aside from this, but I'll detail them in another thread.
I'm on iMac, in photoshop cc. I go to 3D--Get More Content---I download the materials file from the adobe site and it's a .zxp file and I don't know how to load it to photoshop.
My laptop was recently infected and therefore wiped clean and re-loaded with Vista.
I have tried to load my copy of CS4 from the disc but get the message file access denied.I've tried another laptop - same message - and my Lightroom loads ok.
I've got about 4 hours of work into solving the dreaded "Photoshop: CS6 saves in wrong file format on MacOS when trying to load obsolete plugins" (Aside: I don't suppose I can send Adobe an invoice for billable hours?? Naw, never happen.)
I could still not get CS6 PS to open and "save as" correctly. All of my plug-ins were current and the only linked ones were reinstalled after PS was updated. URL.... I saw multiple mentions of the "Standard Multiple Plugin" as a possible source of the problem. Found this file in /Library/ Application Support/Adobe/Plug-ins. (Mac OS X 10.7.5) Removed the file and PS does what it should: defaults to all file formats on open and allows any format to be selected on "save as."
Get Info identifies this file as an Adobe plugin ver. 12.0.2 created and modified 7/18/11 obviously well before I got CS6. It also shows an Adobe copyright (2003-2010) message so this is NOT a third party plugin, nor is it a bad symlink, nor is it an outdated 3rd party plugin. Since this was placed there by the Adobe install and not modified by the CS6 upgrade, I can only conclude that Adobe wanted it there.What - if anything- will happen without this file in place and if it is necessary where does one obtain a new one?
I did not copy any old plug-ins to the new program nor did I have any bad aliases nor did I have multiple copies of anything.
Videostudio 11+ won't load any .avi files,it just gives the message 'catastrophic failure'. Even if I scan the dv tape with the program it will save the files as avi but it still won't let me use them.
I have VS12. I downloaded the trial version of X5, mainly to see if it could read my VS12 files. It could. I used X5 to render a VS12 file that had continually crashed when I tried to rendered it with VS12. Not only did it render it successfully, but it did it about twice as fast as VS12 - great. However, that was yesterday. Today I've been trying to reload the original file into X5 again & I just get the message "File xxxx is already in use". Running X5 by double-clicking on the file, running X5 first & clicking the filename from the file menu or clicking Open from the file menu & selecting the file from the list - all give that result. The only way I have loaded the file is to run X5 & drag the file to the timeline. The file has opened, but the project is shown as untitled, even though there is a title. Also the project is shown as a single entity on the timeline, not made up of individual frames & captions. Where has my project gone? Is it still in X5? I've tried to open other projects, & they all give the same message! I can't try out my trial version I it won't load my projects!
PS I've just spent a few minutes holding the mouse pointer over various icons on the X5 screen & clicking a few to see where I got. After that, I had another go at loading the file - & it loaded successfully!! I assume when I loaded X5, it came up in some mode & I managed to get it out of it.
I've been found a bit of a problem, when I try to assign an IES file to a light MAX Design hard crashes. The odd part is that when I open the IES file in 3ds MAX, not Design, it loads correctly. I've installed all the updates but it still happens.
I've attached the IES files in question, how can get it to work.
Edit- apparently I can't attach the IES files for some reason.
I have loaded a material library file to material editor. Now every time open a file and I open the material editor I found those material libraries loaded, I don't want those files now, how do I can unload them?
In LR4, I was able to create a gpx file on my iPhone while on a photowalk using the "Trails" application. When done the walk, I would email myself that tracklog and save it on my desktop. Using LR5, I can select my gpx file on the desktop, but it does not load. Nothing happens. In LR4, it would show my route on the maps screen and I could auto tag images. But not in LR5.
How can I get LR to read my track logs again so that I could auto tag my photographs.
I ensured that the camera and iPhone clock were both synchronized before the walk.
I just got photoshop recently on my new computer, on which I have never installed photoshop before. When I decided to use it for the first time, I started with the text tool, but found when I dragged the box area I wanted, I could not type inside it.
So I went troubleshooting, and no matter what I did the text stubbornly would not show itself. I have deleted and reinstalled fonts. Redownloaded photoshop. Reset preferences.
have just purchased photoshop cs4 and can not get it to install,the autoplay pops up with :file access denied which tells me that there is something on my pc blocking it ,I have antivirus ,firewall ,antispam all turned of but still no go,so then went to root directory and clicked on :setup exe' and the install initializes and starts checking system profile and it gets to 90% then stops then nothing,
I have CS4 and everything has been working great! I love it! The only problem is that for some reason now I can't COPY images out of my layers. I can paste anything but now when I select images from my layers, there is no option like COPY available in the EDIT tab. Some others seem to be missing to, such as FADE. My PC is definetly capable of running the program as it was for already a week perfectly.
i had to reinstall my OS. yet agian and now my CS3 upgrade wont install , it dosent give an error message it just says on the crappy little window that there were errors installing and errors in the shared components.
