VideoStudio :: Footage Spasming In X3 Editor
Apr 4, 2012
You can see what I mean by spasming: [uRL] ... (jump to about 30 seconds in).
The above video is the 1st time that happened. It just happened to me again for the 2nd time, yesterday. I checked the raw footage and it doesn't spasm, so it's not my recording software. I loaded it into Sony Vegas and it doesn't spasm. It's JUST in VideoStudio. But it also displays as spasming when rendered out.
Why it has happened only twice in about 1000 opportunities. And, to show it's not a fluke... when it happened yesterday, I re-did the work immediately after and it still spasmed. However, I recorded something else today and it worked perfectly.
I use WMCapture for screen recording and also had Audacity running for capturing my microphone. However, I did the same thing a week ago, with no issues. It's 2 completely isolated incidents.
View 4 Replies
ADVERTISEMENT
Apr 14, 2013
I have a Sony camera wich can record 1920x1080 50p.It's the absolute best quality that camera can capture. The raw footage looks marvelous. After open in Videostudio X6 it plays ok but the final disc blu-ray or avchd even on dvd format the footage looks juddery especially on pans and moving subjects.
View 14 Replies
View Related
Jul 20, 2011
What settings I should use to put HD footage -after editing in VS4,using smart proxy etc..- to DVD with a minimal loss of quality. I'm using the Ulead and Corel products since years but I'm a newcomer on the level of HD-editing. I use a Pansonic HDC-SD90 with the following specifications.
Signal System 1080 / 50p, 1080 / 50i, 540 / 25p
Recording Format <Original Format>
1080 / 60p : MPEG-4 AVC/H.264
<AVCHD standard compliant>
HA / HG / HX / HE : MPEG-4 AVC/H.264
<MPEG-4 AVC file format compliant (.MP4)>
iFrame : MPEG-4 AVC/H.264
Recording / Playback Mode
(1920 x 1080) 1080 / 60p (28 Mbps / VBR), (1920 x 1080)
HA (17 Mbps / VBR), (1920 x 1080)
HG (13 Mbps / VBR), (1920 x 1080)
HX (9 Mbps / VBR), (1920 x 1080)
HE (5 Mbps / VBR), (1920 x 1080)
iFrame (28 Mbps / VBR), (960 x 540)
Audio Recording System 1080 / 60p / HA / HG / HX / HE : Dolby Digital (2 ch) iFrame : AAC (2 ch)
View 1 Replies
View Related
Jul 29, 2011
It seems VS always output a video file with 29.970 fps even if the footage was taken at 24P, 30P. Can video studio output a video that is the same as its capture fps rate?
View 2 Replies
View Related
May 12, 2011
I can see that saving my 50p footage as 25p would be ideal as it would just drop every other frame. However vsx3 doesn't give me the 25p option. mp4 hd 1080x1920p only offers 30p
Is this because I set vs up as PAL region ? If I changed it to ntsc would it then offer me the 25p option?
I'm really trying to find my best "saving " option for my 1920 x 1080p footage. I use 50p so I can get good slow motion but 25p or 30p would be good output if it plays nicely..
View 11 Replies
View Related
Apr 4, 2013
I have a DVD of some old 1937 film footage. It was obviously taken as a direct transfer from degraded film stock. I have loaded it into Videostudio from the DVD (which VS has loaded as .mpg files) I have applied some sharpening and visual filters and want to export the footage. Is it best to export to DV and then use that to remake a DVD or burn the DVD direct from VS? I am assuming that trying to reburn the DVD will involve some re-encoding anyway, so either way isn't going to make a difference other than having a DV file to archive.
what I am trying to do with reference to the file conversion aspect and minimising loss of quality.
View 14 Replies
View Related
May 4, 2012
I have a project that was filmed in DVCAM and captured as an AVI file. I want to mix in some footage that was filmed in HDV, on the same camera. Presumably I can capture it as an AVI too and just add it to the project? The project is:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
View 1 Replies
View Related
Jun 10, 2011
Well, I bit the bullet, and I'm slowly learning the tricks of Video Studio. Here's my question... is there anyway I can "park" footage on the lower video tracks without them showing up in my preview video? In other words, I typically place clips on lower timeline tracks and eventually insert them into the final video after tweaking the main video track. When "other" clips are parked at the lower tacks, they appear in the preview footage, which I do not want to see.... yet.
View 3 Replies
View Related
Aug 26, 2013
I have VideoStudio Pro X2 and my operating system is Windows 7 Home Premium. I'm trying to put together a film, including some sequences which have been filmed on an IPad (I think) for which the aspect ratio is a thin vertical rectangle. I would like to change the shape to a horizontal rectangle by removing segments at the top and bottom.
View 10 Replies
View Related
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Feb 28, 2012
I've been using Corel Video Studio X4 to edit the footage from my Muvi HD camera which is usually mounted on my bike frame or cycle helmet.
If I upgrade to X4 Ultimate it comes bundled with some software that is supposed to stabilise the recorded video. (proDAD Mercalli SE)
Any experience of this software plugin, is it worth upgrading for this component, or any alternatives to steady video recordings?
View 10 Replies
View Related
Sep 21, 2013
When you are burning HD footage (video type H.264, Upper Field First) to a DVD, do I keep the project input and output on UPPER FIELD FIRST? Or am I supposed to change both to FRAME BASED?
This is what I know:
SD is Lower Field First
HD is Upper Field First
"Still Photos" is Frame based
I had a videographer tell me today that to burn HD to a DVD i'm supposed to use FRAME BASED. And HD to a BLUE RAY disc is UPPER FIELD FIRST. I thought Frame Based was only for Slideshows.
I'm currently using Corel VideoStudio Pro X4 Ultimate
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: 8000 kbps
Audio data rate: 128 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
View 14 Replies
View Related
Mar 31, 2013
Video studio prox5 ultimate. I am capturing footage using a canon dv video camera, 1394a firewire adapter and firewire cord. I purchased video studio in October 2012. Now, while capturing the footage, I am experiencing a problem with the audio being captured very choppy, like there is static in the audio. This just started happening. The audio is playing fine on the camera but not capturing smoothly.
View 14 Replies
View Related
Jul 3, 2013
I currently have X5 and am wanting to burn my 1080P footage to a blu ray disc. However the settings when I select 'create disc' only allow upper or lower field, and not frame based. Does X6 have the capability to create a disc at 1080P, is it worth purchasing? Or does it even matter if I output to upper field first (quality-wise)?
View 2 Replies
View Related
Apr 13, 2013
I have Canon 60d original footage shot at 1080p 25. The clip is only 9-1/2 sec long. When I play the clip straight out of my pc folder inside VLC the clip is smooth. The moment I import the clip into VS proX5 timeline and straight away, share / create video file / AVCHD / 1920x1080p preset, VS introduces 4 dreaded stutter problems into the render finished product which is very noticeable and ugly to watch.. I am in PAL land and VS was installed to PAL. I have also tried the WMV hd1080p preset and mpeg-4 and the results where just as disappointing.
View 10 Replies
View Related
Jun 4, 2011
I've been working on a project (original is HD footage) and got a successful render to SD DVD. In trying to render a copy for my ipod i get an added audio problem no matter what ipod setting VSP x3 offers me. It's a background distortion, similar to that of clip that goes in very slow motion and the audio is echoing with reverb. The background noise appears to be in continual " waves".
However, the clip does look excellent otherwise in picture, vocals, musically etc.
View 1 Replies
View Related
Apr 20, 2013
I am using VSX5 and after rendering a project of video, where I have added transitions and titles, the video image is not as clear as it was before I rendered.
I have captured the footage from a mini dv camera using firewire, or, someone else has captured the video footage on a dvd using a dvd burner and given me the dvd to import into VSX5. Sometimes VSX5 will not read that dvd for import, so I have used freemake video converter, and converted the dvd into an mpeg file and put it in a folder on my computer where VSX5 "grabs" it. During the edit phase, the video is clear, after render, it loses some of it's clarity and is blurry.
This has not always been the case. The only thing that has changed with VSX5 is I installed sp2.
View 14 Replies
View Related
Dec 19, 2012
I have been using VS11But, I have just bought a new camera, a Panasonic HC V500. A small section of the info on the camera are the following lines:- 2D-to-3D Conversion.The camera processing engine automatically converts your 2D footage to 3D without the need for the optional 3D lens, to then be able to view on your 3D TV for an enhanced viewing experience.
Progressive Video Format for Smooth Action.The Full HD format employed in this model uses 1080/50p (AVCHD Progressive compliant) imaging. The Progressive format carries roughly double the image information of a 1080i interlace signal, minimising flickering and after-images.
As I edit and convert all my video footage into movies, will the latest VS programme retain the 3D conversion ability/facility, if so, what is the latest (or best) VS edition to purchase.
View 2 Replies
View Related
Jan 30, 2011
Trying to convert video footage on VHS video to AVI files which I can burn to DVD disc. I bought EasyCap and installed it along with Ulead Video Studio. The program seems to be running OK, the device appears to have been installed OK. I connected the VHS recorder to the Easy Cap device with the Scart to RCS lead supplied with it. When I go to capture video, nothing happens, apart from the clock starting. The screen remains blank and no video is recorded.
View 1 Replies
View Related
May 27, 2013
I am confronted with a considerably quality loss when I edited and rendered the material from my Sony HDR-CX130 camcorder. It shoots *.m2ts 1920x1080 at 50i (this is in fact 25 fps, I assume).
The loss is visible when there are moving objects or when the camera moves: very not-fluent and not-smooth movement-representation, while the original footage playbacks fine and smoothly in any mediaplayer (Sony PMB or Windows Mediaplayer).
As if the rendered material has a framerate of 12 fps! Which isn't the case, in fact.
I did some experiments: render to other formats like MPEG, tried it on the laptop of a friend who also has CVS X4 installed (W7 SP1, i5 2,3GHz, 4GB RAM),I used properties of first videoclip (which actually doesn't happen), set camcorder at 50p; all without better results.
Project properties I use in CVS X4:
PAL (25 fps)
Microsoft AVI-files
8 bit, 1920 x 1080, 25 fps
Frame-based
Microsoft Video 1
This I was told here to use in order to get stills that are also 1920 x 1080 in size.[URL]
Is the un-fluent playback of edited AVCHD normal, will it be better in version X6?This is visible when playing back the rendered footage in Sony PMB and WMplayer as well.
View 12 Replies
View Related
Apr 9, 2012
Is there a way to get the Euro symbol (€) in the VSX5 text editor
View 14 Replies
View Related
Mar 13, 2012
We've just started using an attribute in a dynamic block and I'm curious if there is a faster way to edit the text, like how you just click outside the dtext or mtext editor to save and exit. the editor.
We only need to edit the value field, not any of the other attritubes. I really like how the dynamic block is saving us some time, but the outdated editor is really irritating, and it's not always convenient to hit Tab then Enter on the keyboard.
Is there perhaps an alternate editor, or a way I can edit the value text in the mtext editor by default rather than opening up the Enhanced Attribute Editor?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 9 Replies
View Related
Jan 1, 2013
I saw one video in which a Photoshop geek quickly launces his raw editor by clicking on a small, illegible icon in the lower right-hand of his Layer Icon in his Layers Dialogue but of course he doesn't explain how that works, and there is no such corresponding little sub-icon in MY Layers icon, and the word Raw doesn't even seem to show up anywhere in any menu. I know this has to be possible. I can open a raw file (.nef, in this case) the obvious way, but after switching it over to Photoshop I can't switch it back to the raw editor (?)
View 2 Replies
View Related
Feb 16, 2014
I want to import footage from a DVD (self burnt). Can I do this directly with Premiere CC or do I need a programm like Handbrake (I'm a Windows user)?
View 16 Replies
View Related
Jul 22, 2013
i have an issue with ae cs3 , when i import my footage is black solid , i can't preview my footage.my footage is wmv,mp4.
View 4 Replies
View Related
Nov 8, 2013
i am animating film footage in Photoshop Cs6. i have used the paint brush tool to draw an image over my film, which works nicely. but i have to do this frame by frame--e.g. as i move to the next frame, what i draw is gone, and i have to reanimate every frame. is there a way to hold what i paint in one frame on to the next, so that i am producing a progressive image over the film?
View 1 Replies
View Related
Aug 11, 2011
Any way you can take 5D footage and convert it from Lin to LOG?
View 1 Replies
View Related
Jan 5, 2013
How to add a texture from a motion tracked footage (Motion tracked in Boujou) onto an object in 3ds max.
For example: Around 0:04 in this video [URL].... the guy smashes into the wall and it collapse. The wall is obviously recreated in 3ds max. But how did they make it so realistic? How did they take the texture from the wall and applied it onto an object?
View 2 Replies
View Related
Mar 18, 2014
I am currently working on a 24fps project with R3D footage in Premiere.Some of the footage for a new sequence I am working on was shot at 48fps (and will need to be exported to 24fps while retaining 48fps' slow motion effect).
Can Premiere play back in the program monitor at 48fps? Can it interpret/render 48fps footage to export to 24fps while retaining the original attributes of the 48fps footage? Or would I need to use additional software to accomplish this?
I would like to be able to edit/playback the footage at the correct frame rate within Premiere as I need to synchronize it with music to see which segments of the clips I have will work best.
View 7 Replies
View Related
Feb 14, 2014
I have two compositions, second is a copy of the first. On the second's layers i use other footages with other start points, while the keyframes of the layers should stay there (related to the layer). I have replaced the the second's footages by alt-drag&drop. But i can not set other start points. So how can i shift the footage behind the layer?
View 1 Replies
View Related
Mar 12, 2014
I am performing some compositing tests using 4K footage (3840x2160, Apple ProRes 422 HQ, from BM Prod. Camera 4K) in AE 5.5. However, when I import the footage, the resolution is listed as being 1364x767. Closer inspection reveals that the footage is truly being treated and displayed at that lower resolution; thousands of pixels are essentially being ignored. When the footage is dropped into a 4K composition, it occupies only a small area at the center of the screen.
Mac OS X 10.9 (my operating system) incorrectly reports the footage resolution in the file properties (in Finder, listed as 1364x766), However, upon opening the file with Quicktime, the footage is displayed correctly and the "inspector" window reports the correct resolution dimensions (3840x2160). So the file is ok; all of the 4K data is there and Quicktime can read/interpret it. Why then can AfterEffects not do the same?
View 2 Replies
View Related
