I currently have X5 and am wanting to burn my 1080P footage to a blu ray disc. However the settings when I select 'create disc' only allow upper or lower field, and not frame based. Does X6 have the capability to create a disc at 1080P, is it worth purchasing? Or does it even matter if I output to upper field first (quality-wise)?
View 2 RepliesI've been trying to find the right tool for this job for over a year (Premiere Elements, Cyberlink, Corel, etc.) and in some way or another, they all let me down (usually during the rendering process). I have an LG Blu-ray burner I bought a year ago (all my software is up to date with the latest device drivers). I have created one blu-ray disc, a very simple one as a test and it works, but I can't remember the software I used. This weekend I tried using VideoStudio pro X3. When I went to the Share tab and clicked create disc, it launch dvd factory 2010 (I think) and blu-ray was not a format choice. I made sure my version (although trial) was fully up to date with all the latest updates.
View 6 Replies View RelatedI am evaluating videostudio 5 and intended to purchase it. However, when I try to burn a disc (br) or render a file, I get the dmp file error message. It tells me to contact corel tech support, but that is impossible. I really like the program, but this is a "show stopper" from purchasing it.
View 2 Replies View RelatedI'm using X5Pro, and have just rendered a project that will be about 1.6Gb including menus. Because I will need to make several disks of the result, I used the create disk image (user guide p156) option in the last panel of the authoring process, rather than burn a disk directly. What I got in the specified folder was a small .iso control file and a winzip compressed archive.
First question: why do it like that? Extraction of that archive to the same folder as the .iso file yields a Video_TS folder containing a series of .bup, .ifo and .vob files.
I ran the iso file with an iso DVD burner program I have. Generally it works on whole .iso files - one humongous file that it breaks apart into the relevant items and burns the DVD in a playable way. As, for example, Mscrosoft's SP3 package for XP - distributed by download and in that format. The burn ISO program ran and it created something like 100kb on the DVD. Something is wrong here.
Second question: Since there isn't a tutorial on how to use this function on-line, is there a document available which describes the correct procedure to create a burned DVD from the created disk image generated by X5?
Is it possible to minimize the disc burning procedure in Vs x4 to allow other programs to be run?
View 2 Replies View RelatedI am a new user of Corel X5. If I "burn" a disc with the "Create DVD Folders" option, how can I use Corel to later burn the created Video_TS files to a DVD disc? I see an option in Corel for burning created disk image folders (ISO) to disc, but not for DVD folders.
View 4 Replies View RelatedI have been having trouble burning DVDs from VideoStudio X4 so I reinstalled and put in Service Pack 2. Still no luck. When I go to share and then pick out Make Disc/DVD the project loads but I cannot go on from there. The NEXT button is grayed out no matter what I do.
View 4 Replies View RelatedI want to edit 4K source footage inside of a 1080p timeline in order to do alot of shot stabilizing throughout my project with the plug-in "Warp Stabilizer" that is standard inside of Adobe Premiere CC. BUT as soon as I drop the plug-in on my 4K footage that is inside of my 1080 timeline there is an error message that says "Warp Stabilizer requires clip dimensions to match sequence (fix by nesting)".
So I guess the "fix" is to nest my clips first then drop the plug-in on the nested clip. My question is this ... is the plug-in using the true resolution of my 4K clip that has been nested to stabilize my shot? Or is it basically using a 1080 proxy type file of my 4K source footage since it is "nested"?
I have around 500 photos of somebody tagged that I would like to burn to a disc. What is the best way to do this in LR? Just drag the photos to a folder on my Mac to burn them or is there another way?
View 1 Replies View RelatedI am new to LR 3 , after downloading photo's from 3 CF cards from a wedding then editing I put chosen best shots into a smart collection and all seemed in order numbers wise etc, when I burnt to a disc they are now not in order of the days event, how can I make sure they are of the following : -
1 - All the same size photo's ready to be printed or put in an album.
2 - How can I make sure the order in which I see them in the library smart collection is burnt in the same order onto a disc, as I have burnt from library and they are all out of order of the wedding event when looked at on the disc !!
I have made a slide show with narration and music. Using Photorshop 10 Organizer.
1. The sound slider has no effect. The music does not dip when there is narration on a slide. Can this be solved?
2. I cannot burn the slideshow. Trying in Photoshop (trying a CD as well as DVD) it will not burn. The CD seemed to burn, but there was nothing on the disc when it said it was completed. Trying on the DVD it put me into Premiere Elements 10. It showed the soundtrack but not the pictures. During the burn the disc came out before burning had finished. Another time it completed the burn but there was nothing on the disc. sometimes the unknown error 2131042560 was quoted.
I was working for a while with VideoStudio ProX5 and I'm trying the demo version of VideoStudio ProX6 and I've got some issue...
First, my video files are .MOV from my Nikon D3100. 1920X1080 24FPS H.264/MPEG-4 Advanced Video Coding.
My computer: HP Laptop DV6 Intel Core i3 350M @ 2.27GHz. 8GB of memory. ATI Mobility Radeon HD 5470. On Win7 Family Premium 64bits.
So it's a car video, cars are at street speed or lower and you can clearly see the sag of the cars. I've try different output (.avi, .mp4, .mts etc... ) from custom to the one included in the program and still sag like crazy.
My Canon HF S21 is set to record at PF25 (i.e 25 fps PROGRESSIVE), and also I choose the highest recording quality : MXP (1920 X 1080, 24 Mbps). When I choose to save the .MTS file here`s what happens :
1. Choosing H.264-MAIN in the Compression tab, the video data rate is limited to 20000 KBps.
2. To have 25 fps (that is, PAL) AND progressive playback, my only choice is to output a file at 1280 X 720. If I choose 1920 X 1080 , AND Frame-based, the Frame Rate drop-down menu becomes greyed out at 30 fps ! Of course, at the Corel VideoStudio tab, I have unticked the "Perform non-sqare pixel rendering", because the source video is made of raster (i.e square) pixels, unlike the HDV 1440 X 1080 recordings.
3. Choosing MPEG-4 HD, the Properties of the video file to be rendered appear as follows :
24bits, 1920 X 1080, 30fps
Frame Based
H.264 Main Profile video, 15000 Kbps
32000 Hz, 16bit, stereo
MPEG AAC Audio, 128Kbps
4. No luck either if I choose Blu ray > PAL H.264 (1920 X1080). The "improvement" appears to be the VBRof 22700 Kbps, but VideoStudio insists on rendering interlaced (Upper Field first) out of my progressive video. The same rendering settings appear if I choose AVCHD > PAL HD-1920. I shall try the Template Manager and see if I can convince VS NOT to alter in any way the quality of the source clip. Meanwhile, I am very interested to read about your experiences with 1080p.
I want to "remaster" my old travel movies (made with Ulead then) to VSX5 Bluray movies. I still have the old VSP file ; the photos taken with an old camera then had high enough resolution but my videos were at 240 lines then. I know that VSX5 upscales automatically to Bluray at rendering phase but what is the best way to enhance my videos to 1080 ; if done prior to rendering, will it yield a better quality movie (and if so, how do I do that ?) or do I have to leave it to VSX5 rendering phase as the only/best process . My 240 videos look ok at 240 but are currently "pixelly" when I view them on my current hdmi PC monitor at native 1080 ?
View 5 Replies View RelatedI use a SLR to capture video and do this at Full HD @ 50 fps. It's crucial that I keep this quality throughout the project.
But I have not been able to find ANY export option/file format that exports at 1080p/50fps! Is it really possible that VS X5 does not support this?
I have VS Pro X5. My footage is shot at 1920 x 1080p with 25 fps and I would like to produce mpeg4 video file with same parameters. I select custom settings, mpeg-4, H.264 high, frame size 1920 x 1080, but then fps is set to 30 and it is greyed out. Is this the limitation of VS? Is there any way to produce high quality HD with 25 fps?
View 6 Replies View RelatedI am trying out video editing for the first time and I am trying out the VideoStudio Pro X5 Ultimate.
But each time I drag a MOV file from my Phone into the program it doesn't display the video. I can hear the Audio but the picture is blank. I have Re-installed Quicktime but I still get the same problem.
When outputting as an MP4 file, the result is SO ugly, it almost completely destroys any fine detail in the image, and the sound is total garbage (it sounds like a 22k 64kbps mp3, just utter crap), so MP4 is just not an option for me.
Unfortunately, as it has been brought to my attention, Corel doesn't seem to truly support 60fps, even though most new cameras film in 60fps--so when I use the modes that are supposed to be for 60fps, it flipflops back and forth between 30fps and 60fps. I just want an output that's consistent, not this flipflopping garbage. There's ONE mode I can use, AVCHD, that gives me a consistent framerate AS LONG AS I don't put any titles up, and as long as none of the source material is of a resolution different from the main--otherwise it will look like a glitched mess.
Since they've crippled being able to adjust the project properties outside anything DVD quality, I can't really adjust anything.
Is there an output mode that will give me a consistent 30fps that supports 1080p?
I use VSX3 to edit down .mov files created with a contour HD helmet camera. I have been using a 720p version of the helmet camera and have had no issues with editing (other than the ocasional C++ runtime errors and the VSX3 program crashing randomly which just seems to be a Corel programming issue) Recently I got to use a 1080p contour HD helmet camera and have problems editing the files in VSX3. In the preview window in the edit screen the 1080p file plays fine. But when I try to trim the file down using the "multi-trim video" function the file is very jittery, takes a long time to load and the sound is in and out, almost like the program can't handle a 1080p file for editing. The "mult-trim video" works fine for the 720p videos.
View 1 Replies View RelatedWhen I render 18 minute ProX5 project to movie file WMV at 1080p it comes out with incorrect aspect ratio, everything is elongated vertically.
I am using a Canon Vix HFS20 camera.
I have VSP X4 Ultimate and a Panasonic TM900K. I have been recording mostly in 1080p for the best quality, but I have notice when compared to VLC or another editor, the preview window's quality is very poor. On my 1080P monitor it looks no better than a DVD. This, in of itself, is not a big issue, but it does make it hard to use VSP X4 to do fine video corrections.
The one that is is when I play down-converted videos from VSP X4 (To 7Kbps DVD) the quality is visibly worse than with my other editor. I have been testing on my playstation (just playing the mpeg 2 files via my media server) (the PS3 is set not to up-convert). When I try to do the same thing on my computer using VLC I do not see much of a difference, but VLC is doing a lot to render on the PC (de-interlacing and all).
I have a Sony camera wich can record 1920x1080 50p.It's the absolute best quality that camera can capture. The raw footage looks marvelous. After open in Videostudio X6 it plays ok but the final disc blu-ray or avchd even on dvd format the footage looks juddery especially on pans and moving subjects.
View 14 Replies View RelatedRecently I am getting an error message when the X6 starts to burn the DVD.
All procesess before ( multiplexing, VOB generation etc.) are working fine but when the DVD steps into the burn phase there is an error 5.0.0. sometimes it goes several times not. The error has been repeated at least on 3 different computers.
The X6 is working fine. On my computer I did not change anything except recorded new videos for editing.
In previous versions I created VSP files. When I came to create a disk I could add one or more VSP files in the share section and then I could click on burn and go and have a meal. The VSP files don't now seem to be any use at all in the share section. I am back to using version 12 that seems to work
View 12 Replies View RelatedIs there a facility in X5 to automatically verify a DVD after burning, I have looked but cant find one. When burning DVDs for customers I use X5 to make an ISO file then burn it using Nero Express 6 as there is a verify facility that can be selected. Maybe I am being too cautious but on a few occasions I have had discs fail the verify, I feel a bit more confident if it passes the verify the DVD is ok. If I can burn with a verify afterwards in X5 this will make the job a bit easier.
View 5 Replies View RelatedWhat settings I should use to put HD footage -after editing in VS4,using smart proxy etc..- to DVD with a minimal loss of quality. I'm using the Ulead and Corel products since years but I'm a newcomer on the level of HD-editing. I use a Pansonic HDC-SD90 with the following specifications.
Signal System 1080 / 50p, 1080 / 50i, 540 / 25p
Recording Format <Original Format>
1080 / 60p : MPEG-4 AVC/H.264
<AVCHD standard compliant>
HA / HG / HX / HE : MPEG-4 AVC/H.264
<MPEG-4 AVC file format compliant (.MP4)>
iFrame : MPEG-4 AVC/H.264
Recording / Playback Mode
(1920 x 1080) 1080 / 60p (28 Mbps / VBR), (1920 x 1080)
HA (17 Mbps / VBR), (1920 x 1080)
HG (13 Mbps / VBR), (1920 x 1080)
HX (9 Mbps / VBR), (1920 x 1080)
HE (5 Mbps / VBR), (1920 x 1080)
iFrame (28 Mbps / VBR), (960 x 540)
Audio Recording System 1080 / 60p / HA / HG / HX / HE : Dolby Digital (2 ch) iFrame : AAC (2 ch)
I have a version of VideoStudio Pro X3 that came pre-installed on an HP computer. It tends to crash, but I can muddle thru to the point where I can save a project as a video file. Once that step is done, there is no option, not even a greyed out button, that allows me to burn a DVD. The saved file is there, just can't do anything with it. Been thru the process and the instructions several times, the option to burn disks seems to be missing. Is this some sort of trial version, maybe stripped down? The option to export to portable device is also limited to low res WMV, no MP4, 3g2, etc.
I tried to run an update, but the program comes back stating that no new updates are available.
It seems VS always output a video file with 29.970 fps even if the footage was taken at 24P, 30P. Can video studio output a video that is the same as its capture fps rate?
View 2 Replies View RelatedI can see that saving my 50p footage as 25p would be ideal as it would just drop every other frame. However vsx3 doesn't give me the 25p option. mp4 hd 1080x1920p only offers 30p
Is this because I set vs up as PAL region ? If I changed it to ntsc would it then offer me the 25p option?
I'm really trying to find my best "saving " option for my 1920 x 1080p footage. I use 50p so I can get good slow motion but 25p or 30p would be good output if it plays nicely..
I have been using Ulead VS 11+ for some time with great results. I recently upgraded to Corel VideoStudio Pro X3. The video capturing and editing works flawlessly however when I then want to burn the video to DVD by selecting the “share” tab and make disk it seems to start up DVD Factory which I find totally lame compared to the DVD burning associated with SV11. There seems to be no advanced functions accessible, I can’t seem to insert a photo into the back ground of the menu title, I can't create new decorations to create new back grounds for my title, I can’t burn the project to an .iso file etc. etc. In addition if you save the project and then come back to it later it does not pick up you saved project, and it does not indicate where it has saved to project. Am I missing something here. At the moment I edit in SV ProX3 and burn in VS11.
View 6 Replies View RelatedAm having problems burning blu-ray files generated from VSX5. I get no errors but when I play the disc the player says"unable to play disc" . On windows Media player it wont recognize the chapter list on the disc.
View 4 Replies View Related