I am a new user of Corel X5. If I "burn" a disc with the "Create DVD Folders" option, how can I use Corel to later burn the created Video_TS files to a DVD disc? I see an option in Corel for burning created disk image folders (ISO) to disc, but not for DVD folders.
View 4 RepliesI am using Video Studio Pro x3 with Movie Factory 2010
I have tried to burn a disc with .mpg .mpg 2 .mp4 and .wmv formats and ALL have failed. I have created chapters in V Studio and they are not seen once i click on create disc and I have gone thru the grief of recreating the chapters
All of this has failed, at the end - 99% of burning. With the .wmv file, burning failed after 10 seconds. I have been able to sucessfully burn a disc using Windows burning software, so I know my drive is working fine, but really want to do this professionally (windows software created its own chapters and they are NOT where I want them and don't seem to be editable.
I have a presentation in less than 2 weeks, and need to have DVD ready before then
I've been trying to find the right tool for this job for over a year (Premiere Elements, Cyberlink, Corel, etc.) and in some way or another, they all let me down (usually during the rendering process). I have an LG Blu-ray burner I bought a year ago (all my software is up to date with the latest device drivers). I have created one blu-ray disc, a very simple one as a test and it works, but I can't remember the software I used. This weekend I tried using VideoStudio pro X3. When I went to the Share tab and clicked create disc, it launch dvd factory 2010 (I think) and blu-ray was not a format choice. I made sure my version (although trial) was fully up to date with all the latest updates.
View 6 Replies View RelatedI am evaluating videostudio 5 and intended to purchase it. However, when I try to burn a disc (br) or render a file, I get the dmp file error message. It tells me to contact corel tech support, but that is impossible. I really like the program, but this is a "show stopper" from purchasing it.
View 2 Replies View RelatedI'm using X5Pro, and have just rendered a project that will be about 1.6Gb including menus. Because I will need to make several disks of the result, I used the create disk image (user guide p156) option in the last panel of the authoring process, rather than burn a disk directly. What I got in the specified folder was a small .iso control file and a winzip compressed archive.
First question: why do it like that? Extraction of that archive to the same folder as the .iso file yields a Video_TS folder containing a series of .bup, .ifo and .vob files.
I ran the iso file with an iso DVD burner program I have. Generally it works on whole .iso files - one humongous file that it breaks apart into the relevant items and burns the DVD in a playable way. As, for example, Mscrosoft's SP3 package for XP - distributed by download and in that format. The burn ISO program ran and it created something like 100kb on the DVD. Something is wrong here.
Second question: Since there isn't a tutorial on how to use this function on-line, is there a document available which describes the correct procedure to create a burned DVD from the created disk image generated by X5?
Is it possible to minimize the disc burning procedure in Vs x4 to allow other programs to be run?
View 2 Replies View RelatedI currently have X5 and am wanting to burn my 1080P footage to a blu ray disc. However the settings when I select 'create disc' only allow upper or lower field, and not frame based. Does X6 have the capability to create a disc at 1080P, is it worth purchasing? Or does it even matter if I output to upper field first (quality-wise)?
View 2 Replies View RelatedI have been having trouble burning DVDs from VideoStudio X4 so I reinstalled and put in Service Pack 2. Still no luck. When I go to share and then pick out Make Disc/DVD the project loads but I cannot go on from there. The NEXT button is grayed out no matter what I do.
View 4 Replies View RelatedAm having problems burning blu-ray files generated from VSX5. I get no errors but when I play the disc the player says"unable to play disc" . On windows Media player it wont recognize the chapter list on the disc.
View 4 Replies View RelatedI have around 500 photos of somebody tagged that I would like to burn to a disc. What is the best way to do this in LR? Just drag the photos to a folder on my Mac to burn them or is there another way?
View 1 Replies View RelatedI'm trying to burn +/- 1gb .mov/mp4 files to dvd to watch on a dvd player hooked up to a tv. I tried burning the mov/mp4 files directly to dvd but my dvd player isn't able to read them. VideoStudio 12 was included on my computer, will it convert mov/mp4 files to a format that can be burned to a dvd that I can watch on my tv?
I don't need to edit the files, just burn them to dvd in the highest quality possible to watch on my tv. If it will, are there any tutorials on how to do this?
I am new to LR 3 , after downloading photo's from 3 CF cards from a wedding then editing I put chosen best shots into a smart collection and all seemed in order numbers wise etc, when I burnt to a disc they are now not in order of the days event, how can I make sure they are of the following : -
1 - All the same size photo's ready to be printed or put in an album.
2 - How can I make sure the order in which I see them in the library smart collection is burnt in the same order onto a disc, as I have burnt from library and they are all out of order of the wedding event when looked at on the disc !!
Having an issue with an unspecified error (5.0.0) when burning DVD to file.
I've created the project as a single Mpeg-2 file as suggested...then added chapters and a DVD menu etc. When i burn it gets to 99% then as it's finishing... Boom... Unspecified Error.
24 Bit 720x 576 , 25fps
DVD-PAL 4:3
Variable 4000kbps
Audio 224kbps
Theres an audio file and couple of JPEGS on the menus if that makes and difference?
I created dvd using VSP projects files and saved also as "create disc image". Now I want to make another dvd using the saved disc image but I can't find it on my PC. I think it is saved as .iso file in a folder. In my search I could find the file but it is in Audio and Video two separate files. I can not open to make dvd. I had labeled with name and date still I can't find it. how to find these files and create dvd disk. I want to save all my dvd projects disc images in one folder with each project name and date created so I can go to my PC HD and locate it. Also, can I save Blue ray disc projects and make copy later?
If these projects when burned and saved with .iso format then Roxio or any other software can burn the dvd or Blue Ray discs by opening the saved .iso files.
I have made a slide show with narration and music. Using Photorshop 10 Organizer.
1. The sound slider has no effect. The music does not dip when there is narration on a slide. Can this be solved?
2. I cannot burn the slideshow. Trying in Photoshop (trying a CD as well as DVD) it will not burn. The CD seemed to burn, but there was nothing on the disc when it said it was completed. Trying on the DVD it put me into Premiere Elements 10. It showed the soundtrack but not the pictures. During the burn the disc came out before burning had finished. Another time it completed the burn but there was nothing on the disc. sometimes the unknown error 2131042560 was quoted.
Trying to redo a disc I did in 2006 on a previous program. When I go to capture and then import, it shows 2 files, title and chapter. They are both the exact same thing? Is there any particular reason for this?
View 3 Replies View RelatedI created a Blu-ray Disc and I lost The master file. How can I import the Blu-ray Disc to be re-edited again?
View 1 Replies View RelatedShooting with Canon 5DmkII DSLR, which provides 1920x1080 .MOV files at 29.97 fps. Data rate on the files is about 45Mbps, with a total bit rate marginally higher.I have been asked to output .MOV at 29.97, 1920x1080 progressive with PhotoJPEG compression at 90%, square pixels.
In Proj. Properties, I seem to need Microsoft AVI (MPEG doesn't allow 1920x1080 option). No compression, and have obviously kept 29.97 fps. Whether I want to perform non-square pixel rendering at this point, and haven't yet found any info on whether the camera shoots square or non-square pixels. Or I want frame-based or upper or lower fields first. I haven't found any explanation of what this means in the product documentation.
I've created an output template to give 1920x1080 at 29.97 fps, 24-bit colour. Again don't know whether to pick frame-based or upper or lower field first. Using PhotoJPEG compression (100% seems the only setting available, but that's OK).
In the final Create dialogue box Options, there is another chance to render non-square pixels (I'm assuming "no" here since I want square), as well as a checkbox for Smart Render, but again no explanation as to why I would need it.
So I've been practicing with 10sec clips to see what happens. With the above settings, the creation takes a couple of minutes and I have been able to generate a huge 1.6GB output file. Play is somewhat jerky since I don't think my computer can keep up. The input files are e.g. 233MB for 44sec, or about 5.3 MB/sec. Am I wrong to expect the output to be about the same size? Curiously, I have been able to generate 50MB files for two of the videos, and the rendering only took a couple of seconds. Unfortunately I have not been able to repeat this, but rather get these 1.6-1.7GB files as the routine. I have tried different input files with the same result.
Unfortunately, in my project which includes HD files, proxy files are not created automatically after capturing, even the "create proxy files" is checked. So to get the proxy files, I have to select all the clips in the timeline and right click to check "create proxy files". What I have to do in order to get automatically the proxy files.
View 8 Replies View RelatedRecently I am getting an error message when the X6 starts to burn the DVD.
All procesess before ( multiplexing, VOB generation etc.) are working fine but when the DVD steps into the burn phase there is an error 5.0.0. sometimes it goes several times not. The error has been repeated at least on 3 different computers.
The X6 is working fine. On my computer I did not change anything except recorded new videos for editing.
In previous versions I created VSP files. When I came to create a disk I could add one or more VSP files in the share section and then I could click on burn and go and have a meal. The VSP files don't now seem to be any use at all in the share section. I am back to using version 12 that seems to work
View 12 Replies View RelatedIs there a facility in X5 to automatically verify a DVD after burning, I have looked but cant find one. When burning DVDs for customers I use X5 to make an ISO file then burn it using Nero Express 6 as there is a verify facility that can be selected. Maybe I am being too cautious but on a few occasions I have had discs fail the verify, I feel a bit more confident if it passes the verify the DVD is ok. If I can burn with a verify afterwards in X5 this will make the job a bit easier.
View 5 Replies View RelatedI have a version of VideoStudio Pro X3 that came pre-installed on an HP computer. It tends to crash, but I can muddle thru to the point where I can save a project as a video file. Once that step is done, there is no option, not even a greyed out button, that allows me to burn a DVD. The saved file is there, just can't do anything with it. Been thru the process and the instructions several times, the option to burn disks seems to be missing. Is this some sort of trial version, maybe stripped down? The option to export to portable device is also limited to low res WMV, no MP4, 3g2, etc.
I tried to run an update, but the program comes back stating that no new updates are available.
I have been using Ulead VS 11+ for some time with great results. I recently upgraded to Corel VideoStudio Pro X3. The video capturing and editing works flawlessly however when I then want to burn the video to DVD by selecting the “share” tab and make disk it seems to start up DVD Factory which I find totally lame compared to the DVD burning associated with SV11. There seems to be no advanced functions accessible, I can’t seem to insert a photo into the back ground of the menu title, I can't create new decorations to create new back grounds for my title, I can’t burn the project to an .iso file etc. etc. In addition if you save the project and then come back to it later it does not pick up you saved project, and it does not indicate where it has saved to project. Am I missing something here. At the moment I edit in SV ProX3 and burn in VS11.
View 6 Replies View RelatedI have VideoStudio X4 pro, think the sales man did a great job as i'm a beginner and man o man this isn't what i thought it woud be I'm trying to save my pictures to cd, it burns in and when i go to play it on the video, it won't work, just comes up black? Have slected create disk image, have used the cd-r before to do a similar thing and it won't work.
View 3 Replies View RelatedHave Sony HDR-TD20V 3D camera and transferred 3D videos to PC. Starting X6 program files are recognized as 3D (little box bottom left) putting videos in timeline. Went to "Create Video File" and selected 3D per manual.
Now here is what I need to know my options as presented. I want to use a Bluray disc to burn with burner (BD) and play in my Sony S570 3D player to 3D Tv. Do I use the Bluray setting and what format (1920x1080)?
I know there is AVCHD, MVC and so on as choices. In other words (in case others have similar camcorder and X6 software) what are the steps I need to follow. I was wondering if I had to leave file as is or have it side by side, etc.
My 3D Tv is able to play any formats (side, Up/DN, etc) I used the Sony Play Memories and burned a bluray successfully but played only in 2D. I've read about players needed to be AVCHD 2.0 to play Play Memories 3D made disc.
I want to be able to use X6 to create discs, burn them and play in BD 3D player.
I've been a VS users since version 6 and have been able to work around the many nuances that each version upgrade had. I upgraded to VS X4, got myself a blu-ray burner and some BD-R's, and prepared my home videos. I'm consistantly geting the 'Unspecified Error 5:0:0' during the burning stage. After 6 wasted BD-R discs,.
Camera: Canon Vixia HF20, all AVCHD formatted video
Background music selected for all menus
Motion menu checked (tried unchecked as well)
No background image (using one of the provided 8 templates)
Moving path unchecked (tried checked as well)
Menu In/Out: none (tried both enabled at default, initially)
Video length is 19.66GB total, 26 menued video segments
I've updated to X4 SP1
I even tried copying over the afCvtTitleMenuRenterUnit.dll 'fix'.
For the video segments, I initially let X4 render them all. When it failed, I created video files (previously my standard method when making discs), creating .m2t (blu-ray H.264 (1920x1080)) for each segment and used those video files for all future burning attempts (as opposed to the VS Project files).
I can see the blu-ray disc has almost fully been written to after ejecting it (after the error). However, it can't be read either on my computer or on a standard TV blu-ray player.
I haven't tried burning a DVD yet, and will try that next to see if this is just related to blu-ray discs, or not. I can't really tell if all of the other posts on this similar topic were in regards to DVD burning, or blu-ray burning.
Running into this issue on earlier verisions, I was able to make an ISO file then burn a DVD with other software. That option doesn't seem available for blu-ray discs?
When I select "Test Before Burning" it doesn't test, but goes straight to burning (I burn at 4.0 speed)
Also, while burning the detailed progress display continues to say "Video/Audio Multiplexing" through the entire process until closing the disc.
I've installed both current patches as well.
I have a Dell Studio 540 desktop running Vista Home Premium. Burner is a PLDS DVD+-RW DH-16A6S ATA Device. I recently burnt 1hr35m mpg to double layered disc without any issue. I then used VSX2 to create DVD using slightly modified menu templates and 12 chapters. I felt the initial stall may have been a glitch so attempted again. The burn stopped once more at 99% complete as indicated in attached jpg.
View 8 Replies View RelatedAm I doing something wrong when setting up the menu and rendering a DVD? Everything sounds perfect/ lines up when I view it in my timeline but after it is burned to a DVD the sound is off by 2-3 seconds. It's only a 15 min video.
View 1 Replies View RelatedVSP5 Ultimite: I opened a saved project and then went to share, and a different DVD menu showed up, one for another project! Like others, I struggle with having to re-create the DVD menu after editing the project. But if I use Smart Package and open the VSP from another location, the Burn module opens in virgin fashion.
View 5 Replies View Related