VideoStudio :: Sag / Lag On 1080P Editing?
Jul 21, 2013
I was working for a while with VideoStudio ProX5 and I'm trying the demo version of VideoStudio ProX6 and I've got some issue...
First, my video files are .MOV from my Nikon D3100. 1920X1080 24FPS H.264/MPEG-4 Advanced Video Coding.
My computer: HP Laptop DV6 Intel Core i3 350M @ 2.27GHz. 8GB of memory. ATI Mobility Radeon HD 5470. On Win7 Family Premium 64bits.
So it's a car video, cars are at street speed or lower and you can clearly see the sag of the cars. I've try different output (.avi, .mp4, .mts etc... ) from custom to the one included in the program and still sag like crazy.
View 7 Replies
ADVERTISEMENT
Mar 20, 2011
My Canon HF S21 is set to record at PF25 (i.e 25 fps PROGRESSIVE), and also I choose the highest recording quality : MXP (1920 X 1080, 24 Mbps). When I choose to save the .MTS file here`s what happens :
1. Choosing H.264-MAIN in the Compression tab, the video data rate is limited to 20000 KBps.
2. To have 25 fps (that is, PAL) AND progressive playback, my only choice is to output a file at 1280 X 720. If I choose 1920 X 1080 , AND Frame-based, the Frame Rate drop-down menu becomes greyed out at 30 fps ! Of course, at the Corel VideoStudio tab, I have unticked the "Perform non-sqare pixel rendering", because the source video is made of raster (i.e square) pixels, unlike the HDV 1440 X 1080 recordings.
3. Choosing MPEG-4 HD, the Properties of the video file to be rendered appear as follows :
24bits, 1920 X 1080, 30fps
Frame Based
H.264 Main Profile video, 15000 Kbps
32000 Hz, 16bit, stereo
MPEG AAC Audio, 128Kbps
4. No luck either if I choose Blu ray > PAL H.264 (1920 X1080). The "improvement" appears to be the VBRof 22700 Kbps, but VideoStudio insists on rendering interlaced (Upper Field first) out of my progressive video. The same rendering settings appear if I choose AVCHD > PAL HD-1920. I shall try the Template Manager and see if I can convince VS NOT to alter in any way the quality of the source clip. Meanwhile, I am very interested to read about your experiences with 1080p.
View 6 Replies
View Related
Dec 30, 2012
I want to "remaster" my old travel movies (made with Ulead then) to VSX5 Bluray movies. I still have the old VSP file ; the photos taken with an old camera then had high enough resolution but my videos were at 240 lines then. I know that VSX5 upscales automatically to Bluray at rendering phase but what is the best way to enhance my videos to 1080 ; if done prior to rendering, will it yield a better quality movie (and if so, how do I do that ?) or do I have to leave it to VSX5 rendering phase as the only/best process . My 240 videos look ok at 240 but are currently "pixelly" when I view them on my current hdmi PC monitor at native 1080 ?
View 5 Replies
View Related
Jan 3, 2013
I use a SLR to capture video and do this at Full HD @ 50 fps. It's crucial that I keep this quality throughout the project.
But I have not been able to find ANY export option/file format that exports at 1080p/50fps! Is it really possible that VS X5 does not support this?
View 2 Replies
View Related
Nov 13, 2012
I have VS Pro X5. My footage is shot at 1920 x 1080p with 25 fps and I would like to produce mpeg4 video file with same parameters. I select custom settings, mpeg-4, H.264 high, frame size 1920 x 1080, but then fps is set to 30 and it is greyed out. Is this the limitation of VS? Is there any way to produce high quality HD with 25 fps?
View 6 Replies
View Related
Jul 3, 2013
I currently have X5 and am wanting to burn my 1080P footage to a blu ray disc. However the settings when I select 'create disc' only allow upper or lower field, and not frame based. Does X6 have the capability to create a disc at 1080P, is it worth purchasing? Or does it even matter if I output to upper field first (quality-wise)?
View 2 Replies
View Related
Oct 24, 2012
I am trying out video editing for the first time and I am trying out the VideoStudio Pro X5 Ultimate.
But each time I drag a MOV file from my Phone into the program it doesn't display the video. I can hear the Audio but the picture is blank. I have Re-installed Quicktime but I still get the same problem.
View 2 Replies
View Related
Nov 15, 2010
When outputting as an MP4 file, the result is SO ugly, it almost completely destroys any fine detail in the image, and the sound is total garbage (it sounds like a 22k 64kbps mp3, just utter crap), so MP4 is just not an option for me.
Unfortunately, as it has been brought to my attention, Corel doesn't seem to truly support 60fps, even though most new cameras film in 60fps--so when I use the modes that are supposed to be for 60fps, it flipflops back and forth between 30fps and 60fps. I just want an output that's consistent, not this flipflopping garbage. There's ONE mode I can use, AVCHD, that gives me a consistent framerate AS LONG AS I don't put any titles up, and as long as none of the source material is of a resolution different from the main--otherwise it will look like a glitched mess.
Since they've crippled being able to adjust the project properties outside anything DVD quality, I can't really adjust anything.
Is there an output mode that will give me a consistent 30fps that supports 1080p?
View 2 Replies
View Related
Jan 13, 2011
I use VSX3 to edit down .mov files created with a contour HD helmet camera. I have been using a 720p version of the helmet camera and have had no issues with editing (other than the ocasional C++ runtime errors and the VSX3 program crashing randomly which just seems to be a Corel programming issue) Recently I got to use a 1080p contour HD helmet camera and have problems editing the files in VSX3. In the preview window in the edit screen the 1080p file plays fine. But when I try to trim the file down using the "multi-trim video" function the file is very jittery, takes a long time to load and the sound is in and out, almost like the program can't handle a 1080p file for editing. The "mult-trim video" works fine for the 720p videos.
View 1 Replies
View Related
May 13, 2012
When I render 18 minute ProX5 project to movie file WMV at 1080p it comes out with incorrect aspect ratio, everything is elongated vertically.
I am using a Canon Vix HFS20 camera.
View 8 Replies
View Related
Jul 7, 2012
I have VSP X4 Ultimate and a Panasonic TM900K. I have been recording mostly in 1080p for the best quality, but I have notice when compared to VLC or another editor, the preview window's quality is very poor. On my 1080P monitor it looks no better than a DVD. This, in of itself, is not a big issue, but it does make it hard to use VSP X4 to do fine video corrections.
The one that is is when I play down-converted videos from VSP X4 (To 7Kbps DVD) the quality is visibly worse than with my other editor. I have been testing on my playstation (just playing the mpeg 2 files via my media server) (the PS3 is set not to up-convert). When I try to do the same thing on my computer using VLC I do not see much of a difference, but VLC is doing a lot to render on the PC (de-interlacing and all).
View 9 Replies
View Related
Jul 20, 2012
I have been having this issue for a few days now, I set up my scene, uses mr sun and sky, told 3ds to render using mental ray and set in going as avi video. I look at the final render after and 3ds says it rendered in 720p but when I look at it the video is in 480p and in very bad quality.
CUP: i7-3770K 3.50GHz
RAM: 16GB DDR3 Corsair Vengeance 1600MHz
GFX CARD: AMD Radeon HD 7870
View 1 Replies
View Related
Sep 19, 2013
I have some questions related to the use of Photoshop for the preparation of images for projectors and presentations.
I've noticed lately that most presentations I seem to attend are presented with images in widescreen format (16:9). I have found some higher resolution projectors available in widescreen format but have some questions.
In case I create my slides with a size of 1920 x 1080, do I need to adjust anything in Photoshop for this ? Using basic mathematics I would imagine that no adjustments would be necessary. After all 1920 x 1080 amounts to a perfect relationship of 16:9. Is this correct ? Should I expect that images projected by a projector with this aspect ratio will contain square pixels and no adjustments are necessary in Photoshop ?
Is there any situation where a pixel is project as a rectangle instead of a square and adjustments to accomodate this need to be made in Photoshop ?
View 1 Replies
View Related
Jan 19, 2013
It is taking 6 - 7 hours to render 2 - 6 minute 1080p videos down to 720p. Granted there are about 10 - 15 layers and a bunch of editing... but when I look at the performance monitor during rendering the intire resources used by my computer is around 45% - 50% for memory, processor, and little to no GPU is this normal?
It just seems really wierd to me. I have read the Adobe blog and watched the Learning Videos on the website on how to adjust the performance settings and have 90% of the RAM alocated to Photoshop.
::: PC Specs :::
Photoshop CS6 Extended 64-bitWindows 7 Ultimate 64-Bit
AMD FX 8150 Eight Core Processor16GB of RAM DDR3AMD Radion HD 4200 (I know it's old but its apparently not being used much anyway)C: Drive - 32GB OCZ2 SSD - Four of them in RAID0 (I've read that this could be a bad idea but i had them laying around and I needed more than 32GB)
Scratch Drive - 2TB older 5200rmp HDD
Rendering to and From - 1TB 7200rpm HDD
View 3 Replies
View Related
May 14, 2012
Should I try and work with two different formats in my time line or should I convert both files to the same format first, I'm using dv-avi files and MTS (AVCHD) files. Project will be going to a standard dvd. Both files are filmed in 16:9 .
View 13 Replies
View Related
Apr 4, 2011
I am trying to edit .mts (from Panasonic HD video a camcorder) files as a project. Its very jerky and the sound does not synchronize the the video. I am using X4 pro on a Dell 420 XPS windows 7 64 bit with 6GB of ram.
View 3 Replies
View Related
Mar 28, 2013
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies
View Related
Oct 21, 2010
In X2, if I waited long enough once a video was loaded into memory, I could rewind/forward/clip to any point in the video on the timeline just about instantly. In X2, if I tried to forward/rewind/clip to a point in the timeline in the video without waiting, it would give me about 1 fps when moving the current point in the timeline, and it would also play the video at the same 1 fps--until I waited a while.
In X3, the video can play pretty smoothly just about right away, but no matter how long I wait, moving backwards in the timeline gives me about 1fps, and moving forward sometimes gives as much as 8fps--but it is never smooth. Was this behavior by design? It makes video editing a total nightmare--it takes forever to find cutpoints in the video. How screaming-fast of a machine must someone have to not get 1fps when moving backwards on the timeline in X3, and is there something I can change in settings that might offer a better framerate?
Should I re-install X2 so I can move in the timeline at a decent rate, then import it into X3 for the final output, or is there a better option?
View 2 Replies
View Related
May 23, 2013
I am trying to edit and render video that was shot in 1920 x 1080 in the best quality possible but the finished product ends up being 720 x 576. When I go to project settings, the highest frame size I can select is 720 x 576, the User-defined option is greyed out. I am using Pro X2.
View 14 Replies
View Related
Apr 22, 2011
What a good start after just installing X4. I tried to add my avi files for editing and every single one fails with the catastrophic failure message. If I double click any avi file, the windows media player plays it fine.
I have edited these avi files many times with x2 before. I tried opening mpg files and they were ok. So im guessing its to do with an avi decoder? - but if so why does the avi file play fine in windows media player?
View 6 Replies
View Related
Nov 27, 2010
I'm new to video editing and am using video studio Pro X3, everytime I edit some video or want to use a clip. The trimmed video always flashes the first frame at the start and finish of the trimmed clip. Also when I add a subtitle or text in the time line, that first frame flashes by at the beginning and end of of the text. This is very annoying and doesn't look very good in the project. How can I remove this first frame and how do I prevent it in the first place??
View 1 Replies
View Related
Jun 5, 2011
Is there a tutorial, procedure or technique to easily edit footage from two video cameras?
View 2 Replies
View Related
Feb 18, 2011
Why is there such a lack of stuff for sports editing. No scoreboard overlays, no score lower thirds, no lineup graphics. I've looked everywhere on the internet and there's nothing. I've created some of my own stuff but I spend more time creating the graphics than I do actually putting together the video. It's very frustrating the lack of stuff for sports. There should be a sports graphic pack released.
Or better yet. I'd love to see something like this for windows based systems.
[URL].......
or
[URL].......
I can't believe there's nothing out there as a package to make it easier to put together a sports video and make it look a little more professional at home without spending $4000 for a Tricaster.
View 4 Replies
View Related
Feb 15, 2012
My problem seems like it should have a simple answer yet I cannot find it anywhere and I even have the user manual printed out.
I have multiple tracks in my project and I want to insert something video at the front end (not the beginning but at the 30 sec mark of a 6 mon video) and have all contects of the other track move as well. I can make this happen when I am deleting "stuff" and everying will move to the left but when I go to insert things, I cannot get the other tracks to move to the right. I know this is a common occurence in video editing so this ability has to be in VS Pro 4 but for the life of me I cannot make it happen.
I know on the left side of track 1 there is down arrow that has an option to enable ripple editting and I do a select all tracks and enable ripple editing but when I try to do the insert, the rest of the track do not move.
View 2 Replies
View Related
Jul 2, 2011
I'm moving over from Pinnacle Studio 15, and so far I like what I'm seeing with VS. The preview pane is MUCH better for editing Hi Def video than what Pinnacle provides, so I may be a convert. But, in Pinnacle, it is easy to create a title, and change the background using stock photos, or your own photos for that matter. I'm having difficulty editing the titles in VS. Is there a way to change the background?
View 2 Replies
View Related
Apr 24, 2013
My main camera saves AVHCD files at 29.975 fps, secondary camera saves mov files at 25 fps, and third camera saves mpeg-4 at 30 fps.
I often wonder if I should just convert all the source clips from all three to one single format for editing, as perhaps it would be easier to ensure the audio and video stays in sync, and it just seems the right way to work.
What would the optimum format be for me if I started doing this? HDV? Actually I want two answers - best compressed format, and best uncompressed format.
View 1 Replies
View Related
Jun 10, 2013
We are giving Corel VideoStudio Pro X6 a trial. We recently attended a concert a client of ours performed. We video recorded this performance using an iphone 4s cell phone and then downloaded to a Toshiba laptop which operates using Windows Vista Home Premium 32bit . We video recorded one song that we wish to upload to YouTube. Our question is: how can we delete sections of the video portion of the recorded file without deleting the audio portion, and then add wanted video clips which have no audio ? Our goal is to replace sections of the video portion of the file with wanted "silent" video clips from other files without changing the original audio track and original timeline in any way. Can this be done using Corel VideoStudio Pro X6? We are hoping that Corel VideoStudio Pro X6 is the video editing software for us.
View 1 Replies
View Related
Aug 10, 2012
I thought about posting this in the X6 wishlist, but I thought I would post it here to see if there was any way to do this. Many times I will do a multicamera shoot with music and it all needs to sync up. lets use a music video as an example.
I set up three camera's start them recording, then I will clap my hands in plain view of all three cameras, I then start the music and shoot the video. when I am done, I will import the three videos into videostudio along with the music.
here's what I want from videostudio. I have three video tracks, I place each video into the three tracks. the currently selected video track is the one only one that is displayed. I find the same frame in all three tracks where my hands come together on the last clap, split them and remove the clip before the split. now all three tracks are in sync. now I place the music in the audio track and manually align it with one of the video tracks.
now you turn on a split mode, where when you split one video track, it splits all three video tracks at the same time. when you click on a split video track, it becomes highlited and is the one that is displayed. you go through and split the video all the way through. each edit will have one of the three video tracks highlighted and will be the one that is displayed. so what you have when you are done, is three video tracks, all split the same, one of the three video tracks is highlighted at each split and is the video that is displayed. basically you can quickly and easily edit the music video, all three tracks remain in sync and only the edits you want are displayed.
you can also drag the splits and it moves the splits in all three video tracks so they remain aligned.
I use cubase 6.5 to record my music and it has this function for audio. I have been wishing for the same thing with my video editing. can you do this somehow with videostudio X5?.
View 8 Replies
View Related
Sep 29, 2011
I have been using VideoStudio software for many years, so am familiar with the way earlier versions work.
I have been working on a new major video project using VideoStudio Pro X4 Ultimate edition the past few days, and have been relatively happy, even with the ProDad. But I have just uploaded some Wav files from a Zoom H4 and although they all load OK and Play OK on the timelines in CLIP mode, when I click on PROJECT and play the same sound files they just provide extremely loud 'white-noise', in other words I'm unable to edit the sound files at all! I thought that possibly the Wav 48.000KHz 24 Bit, Stereo files were at fault, but if I clicked back to CLIP and then pressed play, all the sound is perfect! So it is NOT the sound files but something within X4 Pro.
To double check my sound files, I opened up the exact same Wav files in the Corel Ulead Videostudio 11 Plus software, and ALL the sound files play correctly in both CLIP and PROJECT! This is a VERY serious problem because I cannot edit many important sound files with VS PRo X4 Ultimate edition!
I've tried some 44KHz 16Bit stereo files and they seem to play OK in Project mode within Pro X4.
View 11 Replies
View Related
Feb 3, 2014
I want to edit 4K source footage inside of a 1080p timeline in order to do alot of shot stabilizing throughout my project with the plug-in "Warp Stabilizer" that is standard inside of Adobe Premiere CC. BUT as soon as I drop the plug-in on my 4K footage that is inside of my 1080 timeline there is an error message that says "Warp Stabilizer requires clip dimensions to match sequence (fix by nesting)".
So I guess the "fix" is to nest my clips first then drop the plug-in on the nested clip. My question is this ... is the plug-in using the true resolution of my 4K clip that has been nested to stabilize my shot? Or is it basically using a 1080 proxy type file of my 4K source footage since it is "nested"?
View 3 Replies
View Related
Nov 3, 2011
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies
View Related
