VideoStudio :: Pro X4 And Ripple Editing
Feb 15, 2012
My problem seems like it should have a simple answer yet I cannot find it anywhere and I even have the user manual printed out.
I have multiple tracks in my project and I want to insert something video at the front end (not the beginning but at the 30 sec mark of a 6 mon video) and have all contects of the other track move as well. I can make this happen when I am deleting "stuff" and everying will move to the left but when I go to insert things, I cannot get the other tracks to move to the right. I know this is a common occurence in video editing so this ability has to be in VS Pro 4 but for the life of me I cannot make it happen.
I know on the left side of track 1 there is down arrow that has an option to enable ripple editting and I do a select all tracks and enable ripple editing but when I try to do the insert, the rest of the track do not move.
View 2 Replies
ADVERTISEMENT
Oct 25, 2012
I completed the editing of a multi- camera edit using two tracks. The second cameras footage on the second track was towards the end of the production.
I then proceeded to add the music and sound tracks at the beginning with full ripple editing activated and when doing this I tweaked and removed a few clips to match the music which reduced the production by about 40 seconds in all.
When I got to where the synced clips were, they had moved by about 15 seconds. I had dozens of these from the second camera on the second track that took hours to edit and cut into place. However I managed to move them all in one go by highlighting them all and re-syncing the first one which made all the others fall in line again.
View 4 Replies
View Related
Jan 19, 2011
I see that I have to enable Ripple Editing to lock my titles with the video track before adding more scenes, but I can't seem to find where to do this.
View 2 Replies
View Related
Apr 5, 2011
Still working on my project, and should of done it the other way first.
I need to place a clip in the middle of a project that is done. Can I click ripple editing then place the clip in the middle and have all of the title track move with the clips that will be sliding to the end? Thought I would ask before moving things around.
Or can I put the clip in where it has to be, then hit ripple editing and slide all the title track where they should be all at once? I have not done to much with ripple editing, guess it is a good way to start.
View 1 Replies
View Related
Jan 31, 2005
I want to try to recreate this effect of a circular ripple - actually I want to recreate this pic. I have read how to create rippled water, but not a circular ripple effect.
View 5 Replies
View Related
May 10, 2006
How could I make words in a water ripple appear to ripple as well?
View 4 Replies
View Related
Apr 26, 2004
I am trying to add a "ripple" effect onto this sphere to make it look like a drip of water was falling on it. (any tips on the sphere itself are also greatly appreciated)
[IMG]C:Documents and SettingsAdamGMy DocumentsFolly.jpg[/IMG]
View 5 Replies
View Related
Sep 28, 2002
How would I create a ripple that originates from a center point (like a water drop hitting the water)?
btw, flamingpear.com is an awesome site. I've made better graphics than ever using their tools.
View 2 Replies
View Related
Jul 4, 2009
Just purchased CS4 and Lightroom. CS4 has some funny things going on, or I just need a little a guidance...? I was working on http://www.photoshoplab.com/pixelated-mosaic-edges.htmlthis tutorial and once I get to applying the ocean ripple effect it does nothing. I tried a reboot, shut down and can not get this filter to apply or work. I've also noticed that deleting a layer is grayed out and I can't even drag the layer to the trash icon. The layer is NOT locked. I'm on a windows vista 32 bit machine with 4GB RAM, NVIDIA GeForce 7800 GTX
View 7 Replies
View Related
Jul 4, 2013
I'm looking how to achieve the circle ripple'ish effect that can someone be seen in the outer points of image marked with "1" - (ignore the lens flare itself, don't want it there). I've just played around with some tools to see if I could get somewhere near the effect - this is not quite perfect though. The image marked with "2" got a very low opacity example of this.
Â
Im looking to do something like nr "2" with the white "ripple"/glow'ish effect. I figured it could be done in a manual combination of -> making a circle shape -> applying some effect to it -> copy the layer -> scale it down etc. But haven't been apple to find a useable combination and was hoping there perhaps were some filter or other method.
Â
EDIT: click the image to see it correctlyÂ
[URL]...........
View 1 Replies
View Related
Mar 1, 2012
I'm designing a wrap for a hummer. My client wants it to look like the hummer has a force field and show a few bullets hitting the truck and causing a ripple. I googled this and found out that the "zig zag" filter under "distort" does this. Only problem is, this option is greyed out on my comp. It could be that my project file is half a gigabite (required for the size of printing on the truck).
View 13 Replies
View Related
May 3, 2007
I have a layer which includes font that's been merged with another layer. I want it to appear to "ripple". The problem here is I can't just use some random ripple effect. I need to to correspond with the layer below it which is a pic of a wavy piece of paper. So it needs to be accurate enough so that no one will notice.
View 7 Replies
View Related
Aug 2, 2012
How do you ripple all the layers of a timeline? I can't find hide nor hair of it in the manual.
View 1 Replies
View Related
Feb 19, 2014
Is it possible to prevent timeline markers from responding to a ripple delete? On a film project it's not an issue, but when I do broadcast work, a lot of times I need to hit specfic moments in time, like 28:30 for a half hour show. I'll add a timeline comment mark to that point in time, but later, due to a lot or ripple deleting, that marker has shifted drastically. Right now the only work around I found is to add an ajustment later on an unused track and lock the track. But this gets to be a pain if I need multiple markers.Â
View 2 Replies
View Related
Aug 1, 2012
When I view an image at full screen a slight ripple effect appears, I thought it was just an issue with my GPU rendering settings and the ripple goes away when I zoom in on the image.
The problem is this ripple effect is showing up on the printed image.
View 16 Replies
View Related
May 14, 2012
Should I try and work with two different formats in my time line or should I convert both files to the same format first, I'm using dv-avi files and MTS (AVCHD) files. Project will be going to a standard dvd. Both files are filmed in 16:9 .
View 13 Replies
View Related
Apr 4, 2011
I am trying to edit .mts (from Panasonic HD video a camcorder) files as a project. Its very jerky and the sound does not synchronize the the video. I am using X4 pro on a Dell 420 XPS windows 7 64 bit with 6GB of ram.
View 3 Replies
View Related
Mar 28, 2013
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies
View Related
Oct 21, 2010
In X2, if I waited long enough once a video was loaded into memory, I could rewind/forward/clip to any point in the video on the timeline just about instantly. In X2, if I tried to forward/rewind/clip to a point in the timeline in the video without waiting, it would give me about 1 fps when moving the current point in the timeline, and it would also play the video at the same 1 fps--until I waited a while.
In X3, the video can play pretty smoothly just about right away, but no matter how long I wait, moving backwards in the timeline gives me about 1fps, and moving forward sometimes gives as much as 8fps--but it is never smooth. Was this behavior by design? It makes video editing a total nightmare--it takes forever to find cutpoints in the video. How screaming-fast of a machine must someone have to not get 1fps when moving backwards on the timeline in X3, and is there something I can change in settings that might offer a better framerate?
Should I re-install X2 so I can move in the timeline at a decent rate, then import it into X3 for the final output, or is there a better option?
View 2 Replies
View Related
May 23, 2013
I am trying to edit and render video that was shot in 1920 x 1080 in the best quality possible but the finished product ends up being 720 x 576. When I go to project settings, the highest frame size I can select is 720 x 576, the User-defined option is greyed out. I am using Pro X2.
View 14 Replies
View Related
Apr 22, 2011
What a good start after just installing X4. I tried to add my avi files for editing and every single one fails with the catastrophic failure message. If I double click any avi file, the windows media player plays it fine.
I have edited these avi files many times with x2 before. I tried opening mpg files and they were ok. So im guessing its to do with an avi decoder? - but if so why does the avi file play fine in windows media player?
View 6 Replies
View Related
Nov 27, 2010
I'm new to video editing and am using video studio Pro X3, everytime I edit some video or want to use a clip. The trimmed video always flashes the first frame at the start and finish of the trimmed clip. Also when I add a subtitle or text in the time line, that first frame flashes by at the beginning and end of of the text. This is very annoying and doesn't look very good in the project. How can I remove this first frame and how do I prevent it in the first place??
View 1 Replies
View Related
Jun 5, 2011
Is there a tutorial, procedure or technique to easily edit footage from two video cameras?
View 2 Replies
View Related
Feb 18, 2011
Why is there such a lack of stuff for sports editing. No scoreboard overlays, no score lower thirds, no lineup graphics. I've looked everywhere on the internet and there's nothing. I've created some of my own stuff but I spend more time creating the graphics than I do actually putting together the video. It's very frustrating the lack of stuff for sports. There should be a sports graphic pack released.
Or better yet. I'd love to see something like this for windows based systems.
[URL].......
or
[URL].......
I can't believe there's nothing out there as a package to make it easier to put together a sports video and make it look a little more professional at home without spending $4000 for a Tricaster.
View 4 Replies
View Related
Jul 21, 2013
I was working for a while with VideoStudio ProX5 and I'm trying the demo version of VideoStudio ProX6 and I've got some issue...
First, my video files are .MOV from my Nikon D3100. 1920X1080 24FPS H.264/MPEG-4 Advanced Video Coding.
My computer: HP Laptop DV6 Intel Core i3 350M @ 2.27GHz. 8GB of memory. ATI Mobility Radeon HD 5470. On Win7 Family Premium 64bits.
So it's a car video, cars are at street speed or lower and you can clearly see the sag of the cars. I've try different output (.avi, .mp4, .mts etc... ) from custom to the one included in the program and still sag like crazy.
View 7 Replies
View Related
Jul 2, 2011
I'm moving over from Pinnacle Studio 15, and so far I like what I'm seeing with VS. The preview pane is MUCH better for editing Hi Def video than what Pinnacle provides, so I may be a convert. But, in Pinnacle, it is easy to create a title, and change the background using stock photos, or your own photos for that matter. I'm having difficulty editing the titles in VS. Is there a way to change the background?
View 2 Replies
View Related
Apr 24, 2013
My main camera saves AVHCD files at 29.975 fps, secondary camera saves mov files at 25 fps, and third camera saves mpeg-4 at 30 fps.
I often wonder if I should just convert all the source clips from all three to one single format for editing, as perhaps it would be easier to ensure the audio and video stays in sync, and it just seems the right way to work.
What would the optimum format be for me if I started doing this? HDV? Actually I want two answers - best compressed format, and best uncompressed format.
View 1 Replies
View Related
Jun 10, 2013
We are giving Corel VideoStudio Pro X6 a trial. We recently attended a concert a client of ours performed. We video recorded this performance using an iphone 4s cell phone and then downloaded to a Toshiba laptop which operates using Windows Vista Home Premium 32bit . We video recorded one song that we wish to upload to YouTube. Our question is: how can we delete sections of the video portion of the recorded file without deleting the audio portion, and then add wanted video clips which have no audio ? Our goal is to replace sections of the video portion of the file with wanted "silent" video clips from other files without changing the original audio track and original timeline in any way. Can this be done using Corel VideoStudio Pro X6? We are hoping that Corel VideoStudio Pro X6 is the video editing software for us.
View 1 Replies
View Related
Aug 10, 2012
I thought about posting this in the X6 wishlist, but I thought I would post it here to see if there was any way to do this. Many times I will do a multicamera shoot with music and it all needs to sync up. lets use a music video as an example.
I set up three camera's start them recording, then I will clap my hands in plain view of all three cameras, I then start the music and shoot the video. when I am done, I will import the three videos into videostudio along with the music.
here's what I want from videostudio. I have three video tracks, I place each video into the three tracks. the currently selected video track is the one only one that is displayed. I find the same frame in all three tracks where my hands come together on the last clap, split them and remove the clip before the split. now all three tracks are in sync. now I place the music in the audio track and manually align it with one of the video tracks.
now you turn on a split mode, where when you split one video track, it splits all three video tracks at the same time. when you click on a split video track, it becomes highlited and is the one that is displayed. you go through and split the video all the way through. each edit will have one of the three video tracks highlighted and will be the one that is displayed. so what you have when you are done, is three video tracks, all split the same, one of the three video tracks is highlighted at each split and is the video that is displayed. basically you can quickly and easily edit the music video, all three tracks remain in sync and only the edits you want are displayed.
you can also drag the splits and it moves the splits in all three video tracks so they remain aligned.
I use cubase 6.5 to record my music and it has this function for audio. I have been wishing for the same thing with my video editing. can you do this somehow with videostudio X5?.
View 8 Replies
View Related
Sep 29, 2011
I have been using VideoStudio software for many years, so am familiar with the way earlier versions work.
I have been working on a new major video project using VideoStudio Pro X4 Ultimate edition the past few days, and have been relatively happy, even with the ProDad. But I have just uploaded some Wav files from a Zoom H4 and although they all load OK and Play OK on the timelines in CLIP mode, when I click on PROJECT and play the same sound files they just provide extremely loud 'white-noise', in other words I'm unable to edit the sound files at all! I thought that possibly the Wav 48.000KHz 24 Bit, Stereo files were at fault, but if I clicked back to CLIP and then pressed play, all the sound is perfect! So it is NOT the sound files but something within X4 Pro.
To double check my sound files, I opened up the exact same Wav files in the Corel Ulead Videostudio 11 Plus software, and ALL the sound files play correctly in both CLIP and PROJECT! This is a VERY serious problem because I cannot edit many important sound files with VS PRo X4 Ultimate edition!
I've tried some 44KHz 16Bit stereo files and they seem to play OK in Project mode within Pro X4.
View 11 Replies
View Related
Nov 3, 2011
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies
View Related