VideoStudio :: Best Format For Editing
Apr 24, 2013
My main camera saves AVHCD files at 29.975 fps, secondary camera saves mov files at 25 fps, and third camera saves mpeg-4 at 30 fps.
I often wonder if I should just convert all the source clips from all three to one single format for editing, as perhaps it would be easier to ensure the audio and video stays in sync, and it just seems the right way to work.
What would the optimum format be for me if I started doing this? HDV? Actually I want two answers - best compressed format, and best uncompressed format.
View 1 Replies
ADVERTISEMENT
Sep 28, 2011
Im editing my home dvds that i have imported to my hard drive, now using VideoStudio x4 to crop them into the right clips and adding text,
So far ive managed after some reading to set the in and out points, drag it to the time line, then add text... I had a bit of trouble finding out how to save it, but i think im right in clicking "3 share" and then "create video file" to save the clip ?
Once ive done this what is the best format to save the clip as? baring in mind once i have all my clips cropped with text at the beginning, im hoping to burn them all to a DVD, and add menus... Is the menus also something that can be done on Video studio?
View 14 Replies
View Related
Nov 30, 2011
I'm still using PSP X3. What format more knowledgeable people for me use for editing images.
In the past, I'd take the jpeg produced by my camera, convert it to PSP format, and then when finally finished, save it as jpeg again.
I understand that the PSP format is no longer used, so should I just work in jpeg format? My understanding is that any intermediate saving would compromise image quality; if not jpeg, then what?
View 5 Replies
View Related
Feb 4, 2014
I am a recent convert to Adobe NLE systems coming from FCP 7. My question is: What is the highest quality codec that I can use successfully with AME and Premiere Pro CC?
I’m working on a project that is targeted to screen in theaters (festivals) so I want to finish with the best possible quality. My source was film telecined to Apple FCP Uncompressed 10-bit 4:2:2, 1920 x 1080, Millions, Data rate 1060.67 mbits/sec. However, that format is too unwieldy for editing. When using FCP for previous films, I transcoded those uncompressed files to ProRes 422 (HQ) for editing and for theater screenings.
I see that i can use ProRes with Premiere, with a little work. if he/she recommends a better non-quicktime format for editing and projecting?
I am an Adobe Creative Cloud subscriber and am using AME CC (version 7.2.0.43) and Premiere Pro CC (ver 7.2.1). I have installed all suggested updates. I’m running OSX 10.9.1 on my 2011 imac (core i7 with 32 GB of RAM). My graphics card is a AMD Radeon HD 6970M 2048 MB.
View 3 Replies
View Related
Jun 23, 2012
I shoot in raw and typically edit files as ProPhoto uncompressed 16-bit TIFFs. It's been a while since I set that as my default and I can't remember what the tradeoffs were for compression and even PSD vs. TIFF. Is there a handy reference to inform these choices?
View 6 Replies
View Related
Mar 27, 2013
I'm using Inventor 2011.
Is it possible to edit text formatting (e.g. font, font size, alignment) on mulitple text boxes, rather than having to right click each and click Edit Text? Ctrl+right click doesn't bring the option up to edit text.
View 1 Replies
View Related
Mar 29, 2011
Well I had to re-record it from tape. I was wondering because I have never done such a long one, what may be the best settings as far as bitrates trying not to loose any more quality than necessary.
View 3 Replies
View Related
Mar 29, 2011
I have bought a new HD Camcorder. I understand that I need Blu-ray disk in order to burn my movie to HD format.
I am using the VS Pro x3 program. Before the burning process, in the "Create Video File" step, I have (among the others) the Blu-ray template, the AVCHD template and the HDV template. Which one of them I have to choice?
In the DMF 7se the output format of Blu-ray disk is BD.
View 8 Replies
View Related
Dec 3, 2011
I need to make a few videos and then use those to make another and then use that to make yet another.
Is there a best (or better) format (avi, wmv, mpeg, flv, etc) for doing this to have the least loss due to the reuse or is there some trick to avoid loss (other than mastering everything in one project from the originals)?
View 4 Replies
View Related
Feb 4, 2013
I've been creating video files in Pro X5 to upload to Vimeo. They are fine but I wondered if I could create a better quality format to watch on my laptop e.g. in terms of Kbps etc. The files are:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
They are created from source files which are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
What would be the best format quality for a laptop? I tried 20,000 Kbps and 256 Kbps sound for the heck of it but the laptop struggles to play them.
View 3 Replies
View Related
Sep 29, 2013
I used to own Ulead Video X2 and after consulting many times with Ken Berry I was successful in some important projects. I now have purchased VideoStudio X6 with the hopes of it performing well right out of the box. No such luck. I have installed in on my HP work laptop thinking it's much more powerful than my home PC, but in trying to create my first project, I am not able to simply import a jpg to do a slide show with music. It gives the error "Unable to open file [xxx....xxxx...jpg]. ! File format mismatch [16803:1:3]"
I have of course scoured the web and have seen some other users struggling with the same error. So far all I've seen is that it may be the video card or Update to the Graphics board driver. I'm not too techy though I work at HP...and am really nervous about altering any updates on my work laptop. I haven't yet tried any updates or patches thinking that if I just got this, shouldn't it be the latest? I was successful in importing video from an iPhone and I've been successful with mp3 audio files as well, but the jpg's just aren't working. I even tried converting the jpg files to pdf format - but that's not supported I see as an importable file.
I have also noted that if I try to view the sample pictures from the library, it tells me "Original file [C:program filescorelcorel videostudio pro X4samplesimagexxxxxJPG] doesn't exist. I am able to view the sample video clips. But when looking at where Corel was saved on my system, it didn't default to "Program Files" which I thought is what it stated upon installation, but it put it in "Program Files (x86)" So I don't even know if I can relink to fix that. Even if I do, that doesn't solve my jpg fundamental problem. I hate to sound like a whiner, but I'm really discouraged and hope the fix is easy after spending so much for a reliable Video SW program. My wife's best friend passed away and I've promised a tribute slide show for her wake to be completed in the next 2 weeks.
View 3 Replies
View Related
Mar 1, 2011
Is it possible to Capture in MPEG FORMAT with Pro X4?
It was possible with Pro X2 but not with Pro X3.
View 2 Replies
View Related
Jan 25, 2011
I have a created a video using my Sony XE105 handycam in HD and edited it successfully using X2.
I can then export it to WMV format and view the file in superb quality in windows media player. However, when I try to export into FLV format, I get the message about converting and it sits at 0%. I have left it for over a half hour without any movement before deeming it as having "hung" and trying again.
I'd really like to export movies in FLV format rather than WMV?
View 2 Replies
View Related
Oct 6, 2013
I have problem when I import video. It's says unable to open file, file format mismatch. I have make a clip for Wednesday!!
In addition, LAST TIME WHEN I pressed "create video file" it stopped in the middle of the saving. Why did it happen?
View 14 Replies
View Related
Jun 10, 2011
I have just download and installed Corel VideoStudio Pro X4. Mainly with the expectation I could import and work with MTS file formats.
However I've gone to import them and it comes back with a file format mismatch error. This doesn't make any sense to me, as I read up on it and thought the program could work with these files.
The files that I want to import are very big, eg/ 206mb and 418mb. Do I need to downsize these to work with them? If so, how do I do this?
View 7 Replies
View Related
Mar 23, 2013
I am currently on X6, but have had every version prior produce the same problem. When I create a Video File using the "Custom" avi (Xvid) option, it doesn't matter which Audio format and setting I select ( and I have tried them all !) when I play the file on my TV ( Panasonic - New) I get a message that the Audio file is unsupported, and there is no audio.
View 7 Replies
View Related
Aug 28, 2011
How to render HD 1920 x 1080 video clips into the .mov, 1080p format required by my stock agency. I've gone into Share>Create Video File>Custom>Quicktime Movie Files>Options>General... but I am unable to find a 1920 x 1080 option. 800x600 is the highest setting with the default being 720x480. I'm using VS Pro X4 and also tried X2.
Original clip info for one camera: Type H.264, 24 bits, 1920x1080p, 16:9, 59.94fps Vari. bit rate 26,000
View 4 Replies
View Related
Sep 20, 2011
I have been using Video Studio Pro 4 and was always able to insert, play and record to dvd the MOV file format. All of a sudden I am getting an VS 4 will not let me add Mov files to the time line.
View 4 Replies
View Related
Jan 5, 2012
I have Corel VideoStudio x2. I am trying to open an mp4 video file and I get this error message; Unable to open file [C:xxxxx.mp4]. File format mismatch. [16803:1:2] I can play the file with Windows Media Player, so I know it runs ok.File came from a cell phone device.
View 1 Replies
View Related
Oct 5, 2013
I am trying to add a few sounds to the library so I can use them in my project. I downloaded a few wav files and when I try to import them in my media library, I get the message that File format mismatch.
I did import wav files in the past without any issue. Is there something else to wav files than just the name and extension which could be causing this error?
View 5 Replies
View Related
Oct 14, 2011
i bought VSP4x about a month ago to try to get back into video editing (was originally using Media Studio on my XP machine but it isn't supported on Win7) and was working fine with video acquired through the method capture -> edit - > share. but once i started bringing in videos from other sources it started going bonkers. one source i get my video from is a screen capturing program called Bandicam. it creates standard Mpeg encoded VBR AVIs. i would editing my footage cut, and snip where needed. add some text and then render. as soon as it hits 1% of rendering it will come back with a unspecified error and give me a dump files to send to tech support. i then proceed to find tech support but was unable to find any sorts on the website that wasnt going to cost me $20 just to send an email. i searched everywhere i can after that for a solution. couldnt find one.
Properties of your source files, including video, audio, image files (format, file size, where did you get it?): Program: Bandicam Files:.AVI(Mpeg encoded VRB) size:200-300MBs
What devices are involved and their mode of connection?:There are no devices.
Project Properties (important):
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Output format (file, DVD, VCD, SVCD):Share-> upload to web-> youtube-> MP4HD 16:9
Output Properties (cogwheel in lower left of burn screen): Standard for youtube MP4 HD 16:9
PAL or NTSC: NTSC
Error Codes (if any): unspecified error code
View 6 Replies
View Related
Jun 20, 2011
I have been trying to import AVI (H.264) files but keep getting the file format mismatch. The files all open, play and edit (WMM) on my laptop but not on VS. Other file formats seem to be fine but I wanted this program for its HD capabilities. The files,on sdhc card are from a Veho Kuzo camcorder. how do I set up the preferences so that the program can see these files?
View 9 Replies
View Related
Nov 8, 2013
I just installed VS X5 and tried to import a video from my GoPro Hero3 Black. Two Videos will work but all the others will not. I keep getting "file format mismatch" error.
View 1 Replies
View Related
Mar 17, 2012
I'm trying to insert stills into my project and I keep getting the "file format mismatch" error. I've tried JPG, PNG and even bitmap formats, I've tried different pictures from different cameras/sources and the result is the same every time.
View 12 Replies
View Related
Jan 31, 2013
I have just received back a 15min 8mm movie from a film transfer company. They suggested for editing purposes that it has been transferred as a AVI file.
Having transferred the AVI file to my Video folder in Windows 7 i have tried to enter the file into Coral Video studio 12 by right clicking on the time line, this will not open the file for me to edit.
The file plays straight from the disc ok on the computer ok but does freezes intermittently. the file size is 3.36Gb
View 8 Replies
View Related
Oct 6, 2013
is it posible choose 'framebased' format while burning bluray dvd using UVSX6? how?
since i found the result disk i burn with 'upper field first' looks not as sharpness as the m2t file output with bluray h264 30p (framebased) format, it looks like there are only half pixels amount in vertical direction.
P.S. i look result disk through BD dvd player software on my pc.
View 1 Replies
View Related
Oct 5, 2010
I've been experimenting with syncing audio and video in a precise way (something like URL....), and have found that in every output format except "MPEG Optimizer...", the sync is a little off... or at least different than the preview.
Through experimentation, I have found that you can be off by one frame and not really notice, but two frames and things look "amateurly" synced. Given that there is one frame leeway, I figured that rounding due to frame rate differences are accounted for, but this is not the case.
In some cases, I have also noticed transition and F/X changes, depending on the output format. For example, I have an image of a statue with "AutoSketch" applied. In the preview, everything looks wonderful. In HD MP4 output, the statue is drawn top to bottom, then the base of the statue disappears and is re-drawn. In DV and WMV format, the drawing is noticeably different, even though the resolution is the same.
What gives? If we can't count on the output to be like the preview, then all that time spent making a killer sync is just wasted
View 2 Replies
View Related
Mar 23, 2011
I have a canon 100HF VIXIA that produces AVCHD files. I have been having problems streaming edited videos (VSX3) to my Western Digital Live Plus media player and Samsung BD player...I get very choppy video and sometimes complete stops. My playstation 3 can handle these streams but not the other media players. What would be the best file format to render these videos (in HD)? Should I be outputing these as Blue Ray mpeg2 INSTEAD OF acvhd?
View 8 Replies
View Related
Dec 4, 2012
I have footage in the following format which I'd like to upload to Vimeo (it was shot on a basic home camcorder some years ago). What would be the best format? I have VideoStudio Pro X5 trial version.
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 4:3, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
The Share - Upload to Web - Vimeo MPEG-4 4:3 option gives you:
MPEG-4 Files
24 bits, 640 x 480, 25 fps
Frame-based
H.264 Baseline Profile Video: 2500 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
Is this OK? Vimeo said they pillarbox all SD videos (ie. smaller than 1280x720) in order to fit them into their standard player so should I do the Vimeo HD 16:9 option for instance?
It gives you:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
View 8 Replies
View Related
Nov 5, 2011
I created a 4 minute video project in VS Pro X3. Source of video clips were from a Sony HDR-CX550V camcorder. I added some titles to a few video clips and 3 titles on a "Graphic - Color" background. When creating a video file (under SHARE) and choosing Blu-ray ----> NTSC MPEG2 (1920 x 1080), I found the following: Video clips are sharp, no problem, but the titles have black lines at irregular intervals, to the point that the letters cannot be read. What may be the cause and how can I eliminate this problem.
View 4 Replies
View Related
Jul 30, 2012
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
View 1 Replies
View Related
