VideoStudio :: Export Movies In FLV Format Rather Than WMV?
Jan 25, 2011
I have a created a video using my Sony XE105 handycam in HD and edited it successfully using X2.
I can then export it to WMV format and view the file in superb quality in windows media player. However, when I try to export into FLV format, I get the message about converting and it sits at 0%. I have left it for over a half hour without any movement before deeming it as having "hung" and trying again.
I'd really like to export movies in FLV format rather than WMV?
View 2 Replies
ADVERTISEMENT
Sep 28, 2011
Im editing my home dvds that i have imported to my hard drive, now using VideoStudio x4 to crop them into the right clips and adding text,
So far ive managed after some reading to set the in and out points, drag it to the time line, then add text... I had a bit of trouble finding out how to save it, but i think im right in clicking "3 share" and then "create video file" to save the clip ?
Once ive done this what is the best format to save the clip as? baring in mind once i have all my clips cropped with text at the beginning, im hoping to burn them all to a DVD, and add menus... Is the menus also something that can be done on Video studio?
View 14 Replies
View Related
Dec 20, 2012
How do I export my video to 720p mp4 file format?
I can't find the option. In fact I can't find many options. The custom settings are not very custom really as the choice is very limited or none.
View 2 Replies
View Related
Aug 8, 2012
I am using Premiere CS6 (Windows 7) to create a movie with closed captioning. I use the MovieCaptioner software (http:[url]...) to create the mcc captions dada file. In Premiere I attach the mcc file to a timeline sequence and enable closed captioning display. I can see the movie with captions in the program window. In closed captioning settings I have cc area and service both set to 1. I am having difficulty finding the correct set of parameters that will make Premiere export a movie which includes and displays the captions.
View 28 Replies
View Related
Dec 20, 2010
I recently purchased the VX3/PSX3 bundle. So far we love the flexibility and ease of creating a project. We do a lot of transferring, such as 8mm and VHS for family and friends. Our most recent project included five 20 minute reels of 8mm film. The finished project with menus and credits was just about 1 hour 58 minutes with a size of 6.6GB.
We have a a Blu-Ray burner as well as a DL DVD burner so that size should be fine since we were going to just make a DL DVD. I then went to the SHARE tab and selected the "Create a movie" link. I chose the mpg option just out of familiarity. All went well until I noticed that it broke my project into 2 seperate movies (movie.mpg and movie001.mpg). The first was a bit larger than the second, but almost equal in time. I thought maybe I did something wrong and reran it. The second try yielded basically the same result...two movie files, but this time the second was only 9 minutes long while the first was 1 hour 48 mins. I do not want the extra links on the DVD Menu. The cousin that this is going to is NOT very electronics savvy and the extra buttons on the menu may cause a complete mental breakdown. How I can keep this 6.6GB project as one complete file for DVD authoring? I can forward along file info if need be when I get home.
View 14 Replies
View Related
Aug 24, 2012
I want to try a newer version of VS with a Canopus capture device. I want to convert some old VHS movies to DVD. Can this be accomplished with any of the newer VS versions, 11 up to 15? Also, will they work with Vista 32 bit?
View 4 Replies
View Related
Dec 9, 2011
I recently purchased VideoStudio Pro X4. I have been making movies just fine, but now I am wanting to try some new things such as effects. Here are some things I would like to try, but I am not sure if VideoStudio has this capability:
1. Add explosions to movies.
2. Also other effects like lightning coming from fingertips.
3. I have seen in other video clips where people have added a mouth to various inanimate objects such as a wall or fruit or whatever. The object would remain still while the mouth spoke. I am not sure if this is clear or not.
I noticed that some have used Adobe After Effects. Is this what is needed? It seems kind of expensive.
View 1 Replies
View Related
Feb 13, 2012
I have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.
View 5 Replies
View Related
Mar 16, 2012
I have VisualStudio Pro X5.I would like to create a DVD that will have 3 movies (Titles). I would like to a have Play All button on the menu page so that when selected the 3 movies will play in sequence without returning to the menu after playing a movie. In addition I would also be able to select each each movie individually from the menu. Control would return to the menu after playing the movie.
View 5 Replies
View Related
Dec 17, 2013
I have a bundle of .mpg movies with unwanted sound included. Can I remove it?
Background: Took a bunch of ancient 8mm movies to a store and had them put on a CD. They came back in sets of .bup, .ifo, and .vob files. VideoStudio Pro X6 inducted them as .mpg files. VS was recently bought in a box; allowed update after installation. How to check the version.
View 1 Replies
View Related
Jan 7, 2013
In the past I created a movie and put it onto a DVD. It was created with another software program called NCH VideoPad, if I recall. It worked fine. I loved the DVD's special effects and various other screen choices from its main menu. It has numerous effects on the initial title screen, and included 3 links at the bottom which allowed users to select different scenes, and more.
Is there someway that VS X5 PRO can do the same thing, but within the video, and not by creating a DVD? I know that description is rather vague, but since I can't show you the DVD movie, I don't know how else to say it.
I wish there was some way to have VS import the DVD movie I created, so that I could use it and modify it.
View 6 Replies
View Related
Dec 19, 2012
I have been using VS11But, I have just bought a new camera, a Panasonic HC V500. A small section of the info on the camera are the following lines:- 2D-to-3D Conversion.The camera processing engine automatically converts your 2D footage to 3D without the need for the optional 3D lens, to then be able to view on your 3D TV for an enhanced viewing experience.
Progressive Video Format for Smooth Action.The Full HD format employed in this model uses 1080/50p (AVCHD Progressive compliant) imaging. The Progressive format carries roughly double the image information of a 1080i interlace signal, minimising flickering and after-images.
As I edit and convert all my video footage into movies, will the latest VS programme retain the 3D conversion ability/facility, if so, what is the latest (or best) VS edition to purchase.
View 2 Replies
View Related
Nov 27, 2011
So to share an iphone 4s video, what are the best output settings, to retain the .mov settings, so that there is the least amount of re-encoding, which presumably will be the fastest?
View 1 Replies
View Related
Dec 5, 2012
Some of the movies I've been creating play OK in Windows Media Player but when you try and skip to a later part of the movie by holding and moving the toggle bar there is a 'Windows Media Player has a problem playing the movie' error. All the videos are the correct length and file size. Is there a problem with the files and would it affect how they play on Vimeo? Do I need to do them again? What can I do differently?
I have been creating movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
The source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I'm using Video Studio Pro X5 trial version.
View 3 Replies
View Related
Jun 29, 2011
When I use Quick time movies, my movies (.MOV) are white, I have audio but all I get is a white picture.
View 11 Replies
View Related
Feb 19, 2011
I have captured some screenshots for use in a video. In VideoStudio, when the video is paused, the text looks crisp and is easily read. When the video is playing, the text becomes blurry and very hard to read. I have taken the snapshots using the PrintScreen key and pasted the image into Excel where I trimmed them and then used an Add-in called GraphicsExporter to save the images. I have tried saving them as gif, jpg, png, and tiff images and the results are the same. I pull the image into VideoStudio and have it on screen while I narrate. Everything looks great when the image is in the viewing window but when I hit the play button it becomes blurry and some images are unreadable.
Is there something obvious that I am doing wrong? Maybe not using standard cropping margins or some other mechanical practice that I can change?
View 6 Replies
View Related
Dec 7, 2012
Resolve the problem with export to PLT format? Since one day my X5 starts export objects larger than they are to PLT. Ex. text which should be 200mm wide is in PLT 250mm.
View 4 Replies
View Related
Feb 25, 2012
I am trialing the DG&P of xara. I am creating embroidery files in another software. I need to import in .emf. Most of my clipart, etc that I use is jpeg or png. I am wanting to take those into a program, create the vector file, and import to the embroidery software so that I can manipulate/simplify how I need to to create the stitch out. So, when I am in xara and I bring the image in, I select all and choose export in the .emf format....I figured that out. But, when I bring it into the other software I have a blank page. So, I figure I am missing something. Is there a quick way to convert the outline I bring in (in png) to vectors so that it can export and be manipulated in the other software in .emf? or do I trace the file in xara as I would in the other software, have a rough sketch, and then export? Where is the best info on what to do? I am pretty good at following tutorials and lessons but before I buy I just want to make sure it does what I am wanting it to do.
View 9 Replies
View Related
Sep 19, 2013
I am trying to export a .max file as .sat and it locks up Studiomax. I am new to this (.sat) format and know virtually nothing about what I'm trying to do. My client wants a .sat or step file...that's all I know.
View 9 Replies
View Related
Feb 22, 2011
How do i export my 3d model to .igs format using 3ds max 2011. I used the export option to create an igs file but its giving me a file with .xlo file format. I need to import my model in ansys for analysis work but i couldnt make a igs file. The funny part is, even 3ds max cant import .xlo file after it was exported.
View 5 Replies
View Related
Oct 15, 2012
I am currently using Revit Architecture 2012 and am trying to export a project file in a .fbx format to start using Autodesk Showcase which I just downloaded a free trial for. For whatever reason, Revit won't let me export any file in a .fbx format. Instead of being able to click on that as an option, it's greyed out. Is there an update I need to download or an fbx plug-in I need to get to utilize the fbx exporting function??
PS: I've put myself in the 3D view which I know can be an issue of why the fbx export function is greyed out.
View 1 Replies
View Related
Nov 22, 2013
I have created a map using some DTED files and now I need to use it in 3ds max, so I must export it in .fbx format but I'm not able to do this, because Autocad says to me that I must convert the map in 3D object. What I have to do to export the map in .fbx format??
View 4 Replies
View Related
Dec 23, 2012
I have a few MOV format videos that I need to rotate and re-save with PS CS6. I've never tried video editing with Photoshop, and this must be the most basic of basic starts in my next career as a film producer. I assume I just go to Image > Image Rotation as one does with image files? Then when I export the video, and select QuickTime MOV format, the resulting file does not actually have any video in it -- only audio. And despite having no video apparently, the file size is huuuge.
I have QuickTime viewer installed, but do not have a licence for QuickTime full version. Is that it?
Shall I just export to mp4 and be done with it? I would prefer to be consistent... so that I have all MOV files (I won't have to rotate / edit all video files, only some).
View 9 Replies
View Related
Aug 10, 2011
I have been using Xara Designer Pro 7 for almost a month now and love it so far, but I cannot seem to export graphics in the PSD format. I never had this problem with Xara DP 6. When I go to export, I have tried it both ways, as "Selected Images" and "Entire Page" and all I get is a blank image.
I would really like the PSD export to work because I design web pages in Xara and then bring them into Photoshop Elements 9 or Photoshop CS5 or Fireworks CS5 to slice them up for html pages. This worked great in Xara Designer Pro 6.
I know this probably an issue for Xara support, but I figured I would ask here first because I might get a quicker response. Maybe I can doing something wrong? Do I need to do something with layers?
View 1 Replies
View Related
Nov 22, 2011
I m trying to use ivy generator. It supports obj format. I created a box in max. I exported to obj format. When i go to the ivy generator then the box is different. I tried normal. But its not working.
How can i export to obj format properly?
View 1 Replies
View Related
Jun 13, 2011
How do I export in .obj format from Maya 2012?
View 8 Replies
View Related
Nov 22, 2010
I'm trying to export a C3D 2010 drawing to Autocad 2007 format, and it's failing with the following error: So what does that mean? After all, I'm EXPORTING TO AUTOCAD FORMAT, which I thought would convert things to "plain AutoCAD format".
View 9 Replies
View Related
Oct 2, 2012
I'm on Illustrator CS5 and are trying to export my artwork to a PDF format in such a way as so others with illustrator cannot open the file and access its layers and pull out the artwork etc.
I click File, "Save a copy", choose PDF I thought that is what unchecking the "Preserve Illustrator Editing Capabilities" would do it, but when I uncheck it I still have access all the layers when I open the PDF.
Is there another setting I am missing etc? I've tried saving the artwork as a jpg, and doing print export to PDF but I just cant get the same crispness at the optimised file size like I was when doing "Save a copy".
Am I missing a setting or, do I need to do something else to the artwork before saving the PDF?
View 4 Replies
View Related
Mar 13, 2012
Is there an add on, or any way to export a slideshow to a DVD format, instead of an MP4? I use a 3rd party program to do this conversion now.
View 1 Replies
View Related
Apr 12, 2012
is it possible to add this features in the Book module of the Lightroom 4?
I understand that is possible to export in PDF file format, but sometime, in order to use online printing service, is better to have one JPG file for every page.
I think that is very simple to add this feature to te book module.
View 1 Replies
View Related
Sep 29, 2013
I have an drawing file which contains 3000points , as i want those to be converted in .csv format,
[URL]
View 9 Replies
View Related
