I have a 16:9 video and when I select "save as still image", the resultant image is squeezed into 4:3 and doesnt look good. I cant see anything in preferences that allows me to adjust this. Can I tweak "save as still image" so it keeps the correct aspect ratio?
View 2 RepliesI am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
I have just spent several days putting a project together. Mainly still images with some digital video.
When I rendered the project (pal 16_9 frame based also tried lower first) the result is far from acceptable. It looks like a low res picture although I rendered with high quality settings (the same ones I have used many times before) Straight lines seem to have a slight saw tooth effect. If I utilize an overlay the problem is suddenly much more pronounced. Wether this is caused by the overlay itself or the fact that the images are enlarged slightly I don't know.
The video clips from my digital video camera seem to be ok, the problem being mainly with the still images.
By the way the same images created as a slide show in movie factory are perfect.
I have a fast computer with vista installed and had excellent results earlier in the year with another sinilar project.
Using pro x4, when he imports a AVCHD clip and plays it back, the audio is distorted. The same clips audio is fine playing directly from the desktop, using windows media player. It also plays back fine in another video editing program.
(O.S Windows 7 Ultimate 64bit).
I have a video clip (.MOV) which I have added to my project.
When I preview the clip itself the sound is perfect. However when I preview he actual project, the sound is distorted.?
when i have on my timeline more than 1 audio track playing at the same time, the result is the audio sounds choppy and distorted. but when i playback just one audio clip it is fine.
View 4 Replies View RelatedJust skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
I have Photoshop 5.0 Limited Edition.
I have just bough a Toshiba Satellite P100 which has a 17" screen. I have put a photo of my daughter on the Desktop but because of the width of the screen it is distorted sideays (widened).
How can I use Photoshop to cancel the datortion by compressing it?
On my VS Pro x2 I find that "Save as still image" is suddenly not working. Get no response when I select. Before I've enjoyed using this feature many times.
View 1 Replies View RelatedI just edited my my top 15 pics of a shoot i just did. I saved them in the RAW format. I didnt save the origional NEF, because i didnt want to not have the origional .NEF i took. It also saved a .XMP of the file. Ok, so saving goes fine, but when I open it again... it asks me about size, and some other things... I have no idea why its asking these things... I put in some numbers close to the picture size... and it opens grayscale, and totally distorted....most of them are just many lines...
View 5 Replies View RelatedWhen I add a gif layer to another one the image becomes distorted and really bad. I did this the first time and I was able to make 8 gifs play in a row without any problems.
ex: [URL].........
icon.cdr
I have a problem with exporting bitmaps (for icons)., The resulting image is totally distorted compared to the original document. I define document size to 16x16 pixels with a 72 dpi resolution. I would like to have the exported bmp image to be an exact copy of the illustration, thus having unchecked the anti aliasing function and every object is designed to match the pixel size. The same happens if I try to convert the graphic to a bitmap, see screenshots below. I have attached the original cdr file.
i drew this picture waaaay back but i never found a solution. the outline i did always looks like this no matter what size i outline it at. is there a solution to this?
View 3 Replies View RelatedScaling - for some reason the image get distorted after scaling. see example:
Each time I scale it'll do it differently. this time it made the right side thicker.
Alignment - the bounding box has offset and when aligning it doesn't align the objects right:
The image i took was one of my desktop accessories from about one ft. away and at 24mm wide angle. in the image"s four corners is the black edges of the lens.(raw one) Also the front edge of the desk is curved inwards and i have some bowing of the desktop accessories. how can this be corrected? I am sending two images one jpeg and the other the raw image.The second one is the RAW one. What else can be corrected in the raw image.
View 2 Replies View RelatedI have an EPS file that I am placing in Indesign doc. The image looks great in Illustrator, but in InDesign once placed there is a wave pattern to the colours (like an old tv) – not a smooth gradient. Is this a color profile problem? Or issues with how to maintain a vector image quality when importing into indesign? Upon export to PDF, again the EPS file exports fine, but InDesign export the colors aren't smooth (see sample images). The color is formatted for print (Fogra 39) for both.
changing the working space to setting for print in InDesign. Under “placed content” should keep existing assignments, enable all profiles, disable all profiles be selected?
When I scan my photos they are not always straight. I use Image-RotateCanvas-arbitrary command to change the percentage of rotation to straighten image.
I automated the process in "actions" menu to rotate canvas 0.5%CW and 0.5%CCW.
I decided to play a little bit with newly made "action" hotkeys to get used to them.
Now the problem
When I rotated the image 5 times CCW and 5 time CW I noticed that it became significantly distorted, blurred. I tried manually do the same (without automation) same result. With every additional step of rotating, image becomes more distorted, so it is not faulty automation...
Question:
Is it normal?
P.S. I scan images at 24 bit color, 150 resolution.
I've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
After designing, i try to save the image by clicking save as, but it does not trigger any thing. even if i click save alone. it's still the same thing. Until i try to close the interface, then it will pop-up a dialog message that do i want to save before i close or not, then i click yes but it does not display png,jpeg and the likes as file extension. it only displays psd and some uncommon extensions.
View 3 Replies View RelatedI cannot save images from Photoshop CC as a dialogue box opens with "cannot save image.....as you do not have write access
View 2 Replies View Related! would assume that something like this has been made but i cant for the life of me find it when shall i find a plugin or default way of doing this i have about 50 layers that need saving as an image each and the idea of doing it by hand scares me.
View 6 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedSo I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies View RelatedI have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View RelatedAny plugin or something that gathers all the colors within a given image and allows you to save the pallete in another image...If you seen a sprite sheet thats pretty much what Im asking for.It'd be cool if the colors were sorted by how dark it was and by RGB.
View 2 Replies View RelatedIf I load a large image (say 5400 px sq.) in Paint.net (or similar) & choose a zoom level where I like the look / size of individual elements, in ONE area. Image is still no where near 100%.
I select a rectangle so the ACTUAL size of rectangle_AND the way the selection looks AT THAT ZOOM level, is what I want. Say, to use as Fx header background.
Problem I've had: Because the image I initially cropped wasn't at 100%, when crop it - the PHYSICAL size of the rectangle may be 1920 x 180 px, but the prgm still thinks / knows it's really 3500 x 450 (or such), at 40% zoom. I can't just save the image - as it looks on screen - & it be that size when reopen it.
I DON'T want to resize / resample it, because (sometimes) that changes the current look (size of certain elements in the image). The only way I've found (gotta be another way) is take a screen shot of the cropped image, at it's CURRENT zoom level. Then it will save as a 1920 x 180 px image, NOT as a 3500 x 450 px image that was at reduced zoom.
If I resize & save at a REDUCED %, it can change the look & size of elements. Every thing I've tried to save the image - at it's PHYSICAL size on screen - say 18.5 in. x 1.75 in. (when image is NOT @ 100% zoom), results in saving a much larger image. I understand this, but looking for a way around it. Used various settings & tried to trick the apps many ways - cropping in one app, copying to another - you name it.
In Corel Video Studio Pro x3 - Is there anyway to save a single chosen frame as a .jpg file or some other editable picture format?
View 4 Replies View RelatedI can see that saving my 50p footage as 25p would be ideal as it would just drop every other frame. However vsx3 doesn't give me the 25p option. mp4 hd 1080x1920p only offers 30p
Is this because I set vs up as PAL region ? If I changed it to ntsc would it then offer me the 25p option?
I'm really trying to find my best "saving " option for my 1920 x 1080p footage. I use 50p so I can get good slow motion but 25p or 30p would be good output if it plays nicely..
When I said 20 seconds. I just meant that as an example. For saving as an avi, I just wanted to use it in another project. I only wanted to be able to cut out a little part of a short part of a video on a video and overlay track and use just that part somewhere else. without saving the whole program that is about 20 minutes long. I try for nothing complicated, So I have to use the blue track above the timeline. That is what I have to figure out how to use it.
Posts: 4
Joined: Thu Jun 07, 2012 3:32 pm
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: intel
processor: amd
ram: 3 gb
Monitor/Display Make & Model: hp
Private message
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies View Related