! would assume that something like this has been made but i cant for the life of me find it when shall i find a plugin or default way of doing this i have about 50 layers that need saving as an image each and the idea of doing it by hand scares me.
View 6 RepliesI'm only on CS5. Is there a way to save a crop as one might save a non destructive layer?
View 4 Replies View RelatedAND/OR a open tab recovery cache or way to extract the images that get lost during a crash of PDN.
Number two on my list behind your fantastic new layer functionality that I had been dreaming about for three years. I NEVER close PDN. The ONLY time it closes is once every week or two when the 20, 30, 50 tabs that I have open, finally overwhelm my system. I bounce back and forth so much that there is no way to continuously save them as I make changes cause it would jack up my workflow by taking up too much time.
No way around it, this is just how I work. It would be lovely if PDN was able to, similar to After Effects, popup an error box saying it was about to crash and did 'you" want to save the session. Especially, now, with 4, as while it is a super duper version upgrade, the crashes were daily, with me, and I couldn't keep losing that much data. Sophie's choice, for me. The old layer window or daily crashes.
While "Draw" of Coreldraw X5 is working well, Corel Photopaint X5 does not "Save", "Save as..." or "Export" files. It just does nothing, when I choose to save a file under "something.cpt". It works, as long as it is a JPG, but not as a CPT. I am working on a Win7, with CorelX5 in german. Support told me to reinstall.
View 15 Replies View RelatedI'm always cropping pieces of a large composition, then saving, then undoing and repeating. I noticed that GIMP has an understanding of layer size. If I could only save the image based on the layer size, I wouldn't need to crop every time, then undo. It would just know!
Aside from the redundancy, sometimes changes are made after cropping and saving and I am unable to return back to my original document size after exhausting undo's. Which means that everything else in the image is gone.
Any plugin or something that gathers all the colors within a given image and allows you to save the pallete in another image...If you seen a sprite sheet thats pretty much what Im asking for.It'd be cool if the colors were sorted by how dark it was and by RGB.
View 2 Replies View RelatedIf I load a large image (say 5400 px sq.) in Paint.net (or similar) & choose a zoom level where I like the look / size of individual elements, in ONE area. Image is still no where near 100%.
I select a rectangle so the ACTUAL size of rectangle_AND the way the selection looks AT THAT ZOOM level, is what I want. Say, to use as Fx header background.
Problem I've had: Because the image I initially cropped wasn't at 100%, when crop it - the PHYSICAL size of the rectangle may be 1920 x 180 px, but the prgm still thinks / knows it's really 3500 x 450 (or such), at 40% zoom. I can't just save the image - as it looks on screen - & it be that size when reopen it.
I DON'T want to resize / resample it, because (sometimes) that changes the current look (size of certain elements in the image). The only way I've found (gotta be another way) is take a screen shot of the cropped image, at it's CURRENT zoom level. Then it will save as a 1920 x 180 px image, NOT as a 3500 x 450 px image that was at reduced zoom.
If I resize & save at a REDUCED %, it can change the look & size of elements. Every thing I've tried to save the image - at it's PHYSICAL size on screen - say 18.5 in. x 1.75 in. (when image is NOT @ 100% zoom), results in saving a much larger image. I understand this, but looking for a way around it. Used various settings & tried to trick the apps many ways - cropping in one app, copying to another - you name it.
After designing, i try to save the image by clicking save as, but it does not trigger any thing. even if i click save alone. it's still the same thing. Until i try to close the interface, then it will pop-up a dialog message that do i want to save before i close or not, then i click yes but it does not display png,jpeg and the likes as file extension. it only displays psd and some uncommon extensions.
View 3 Replies View RelatedI cannot save images from Photoshop CC as a dialogue box opens with "cannot save image.....as you do not have write access
View 2 Replies View RelatedI used GAP to create animated fire and I want to know if there's a way to save each layer as a png without merging or flattening the image.
View 3 Replies View RelatedA client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies View RelatedJust installed CorelDraw Graphic Suite X5.... version : 15.2.0.661
The "Save" command or "Save as" does not work for me in Photo-paint X5.
The patch does not want to install.
In Photoshop, I have removed part of a layer via a mask, leaving only one part of the image. Now I wish to save this part as an independent image, png or gif with a transparency. How can I achieve this?
View 2 Replies View RelatedHow do you save an image to PDF format?
View 2 Replies View RelatedI have an image, whose outline is well defined, which I am preparing for laser cutting/engraving. I am trying to find a quick and easy way of creating a cutting path around the edges of the image. Tracing in Corel Draw is not good enough. PhotoPaint will convert the mask to a path but it is not well defined. I can easily create an accurate mask with Paint Shop Pro, and even fill it with black colour, but that is as far as I can get. I have tried pasting as a new image but there is an undeleteable and unmoveable layer created which stops the image being visible. Instead of crisp black image I just get a blank white square.
View 4 Replies View RelatedI was wondering if it's possible to save an image as Base64 string? Maybe as a plugin?
View 5 Replies View Related The Photo Paint program can save an image in several formats. However, I do not see an option to save an image file in the .png (portable network graphics) format.
Is it possible to save an image in the .png format using Photo Paint?
How do I save an image with a transparent background. I check of transparent background when loading up an new image. I set my image dimensions make color transparent and go. When I save the file in jpg it previews with a white background. I need to use my logo on different color media each time the logo sits in a white box.
View 1 Replies View RelatedI used to be able to save a layered image as an .apng file [and set the delay time etc], which I would then convert to a gif using apng2gif. I found that the quality was turned out better than the other ways I've used to try and make gifs, and it seemed easier.
Anyway the other day I had to format my laptop and as a result all the programs were uninstalled. When I re-installed Paint.net I found that I couldn't save images as .apng anymore.
As far as I can remember the only changes I made to Paint.net were downloading some pyrochild effects.
Corel photopaint crashes each time you try to save an image with W 8.1
View 2 Replies View RelatedI use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedWhen I have a multi page Ai fil e (50 pages) and 'Save as', it saves more than just the single page I specified (ie. Range 1-1)... it saves all 50 over again? How do I just save 1 of the 50?
View 1 Replies View RelatedA digi image, cropped (crop tool), resized (resample), and saved (save as). Everything on 'default' (usual settings for this) or as I would like. Close and re-open, the image shows as the cropped image, but the thumbnail is the original.
I bought a new camera card today, having run out of settings to try. Took a pic, copied over, and it cropped and saved fine. So I went back to those taken yesterday, still full image thumbnail. Took new ones on new card, but full image thumbnails. Recropped the original photo that saved earlier today with cropped thumbnail - the full image is now in its thumbnail.
After I've finished editing or combining photos, I try to save them and all that gets saved is a blank image. How do I get the program to save my images properly?
View 8 Replies View RelatedMy custom artboards no longer crop graphics properly. Instead of a specific targeted crop area, it just creates a jpg or png of ALL art on displayed layer. What did I turn on or off? Yeah, exporting the graphics works, but I want to control the final image size and preview too. What happened?
View 3 Replies View RelatedA link or a brief explanation of"when & why" and "how to use" a master layer when working with a multi - layered image (psd or psb) file in CS6.
I've seen a couple of tutorials that make use of a "master layer" but I don't understand the "when & why.
Till X3 Photo-Paint opened and saved transparent PNGs as a seperate image with attached mask.Example:I have an image and load a B/W mask into it.
When I save this as PNG and reload it in X3, Photo-Paint displays again exactly what I have just saved:
However when I open this same PNG in X6, the image and mask get merged into a single object:
It's in effect doing automatically a "create object from selection" function and discards then the background.Why? I can't work with the full background image anymore, because the transparent parts are missing, and the mask is also gone. Is there no way to open the full PNG, without any merging and deleting of masks, just the way X3 was doing it?Also, the only way to save a transparent PNG in X6 is to check "save only selected objects"? When I don't check this, but still check "transparency" in the PNG export dialogue, then the mask won't be saved nonetheless.
Trying to edit and save this file fails silently, because Photo-PAINT does get confused by a file name like this: "filename.morename.extension". Nothing gets saved.
The actual file name taken from my example file is: "Flag_of_Germany.svg.png".
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I spent 5 hours on a graphic for my children's book. Saved it, interestingly enough, in Paint.NET as a multi-layer .jpeg, which I thought was fantastic as it had never worked before. Ahhh, and it isn't working now. Now I can't open the file. I've tried Paint.NET, MS Paint, GIMP, MS Picture Manager, Windows Picture Viewer, and Windows Media Center. Maybe other programs.
View 5 Replies View RelatedI am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
I am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.