My custom artboards no longer crop graphics properly. Instead of a specific targeted crop area, it just creates a jpg or png of ALL art on displayed layer. What did I turn on or off? Yeah, exporting the graphics works, but I want to control the final image size and preview too. What happened?
View 3 RepliesIllustrator incorrectly crops artwork too small by a few pixel when using Save for Web or Export. If you fit an artboard to your artwork, either manually using smart guides or by using the "Fit to Selected" command, it will look correct in the work area but when you go to Save for Web it will be noticeably truncated on the right and bottom sides. If all the artwork is supposed to be within the artboard then toggling "Clip to Artboard" will actually change the size of the exported image by 1 or 2 pixels when it shouldn't change at all.
View 2 Replies View RelatedUsing CS6. In the artboard window, I select an artboard tool icon next to an artboard. The artboard displays selected, with the usual grab handles at corners and the middle of sides that in Adobe-world always signal that an object can be resized. I am unable, however, to select the grab handles. When I try to do so, "beep."
An Artboard Options panel has also opened. i can resize the artboard by changing the Width and Height, but I have to guess what I want. If I close this panel, the grab handles go away.
I have a AI CS6 file with 16 artboards. I need to 'save for web" a jpg of each artboard. Is there a way to automate this, by setting up an action - or is there any way to do this? I'll be having to do it frequently.
View 16 Replies View RelatedI have tried googling this and am able to save each artboard as a jpg but not as an eps or ai file.
View 6 Replies View RelatedI have setup a display panel with 4boards at various sizes. (Spreads). I now need to make a PDF but as artboard spreads as this is needs to be shown like this for sign off.
Illustrator cs6
When saving for web or exporting an artboard is there any way to pre-populate the save file name dialog box with the artboard's given name. It would save having to re-name the file and make good use of that metadata.
View 4 Replies View RelatedThe first time it happened, I uninstalled AI and did a fresh install which fixed it for a short time. When I save a PDF out of AI, it does not save to the artboard constraints. This is a screen shot of my AI document which has 2 pages.
When I save as PDF, this is what the file looks like:
(Pg 1)
(Pg 2)
After the original file has been saved (incorrectly) I can open it and save it again and it will be fine.
I have a CS5 document with two artboards. Can I save the artboards to separate files? The File | Export command doesn't support the AI format and the "Use Artboards" option is disabled when using the File | Save As command.
View 6 Replies View RelatedIllustrator CC: how do I save my svg with artboard size?
It looks right when I open it in Illustrator, but in finder is still letter size.
I've created an image that has some bleeds and needs to be saved as a JPEG for web display. If I just export it (or save for web and devices), the off-artboard stuff shows up in the saved image (which, of course, is bigger than the artboard). I've created a mask layer that masks the visibility of the excess artwork within AI and the saved file, but the off-artboard area occupied by the masked artwork is still there in the saved image. How can I non-destructively hide this stuff during saves, saving just the artboard?
View 2 Replies View RelatedMy crops are moved around once a folder is reopened after cropping dozens of images to that folder.
Should I crop each individual image, then "Save Image" or click "Done" after cropping each individual image?
Should I crop all images, individually, "Select All" images, then "Save Image"?
Should I crop all images individually, "Select All" images, then click "Done"?
Should I crop all images individually, leaving the last icon selected, then click "Done"?
Is it possible to save illustrator XMP thumbnail previews by artboard? It seems like Illustrator saves a single thumbnail with all art regardless of the number of artboards.
If there is a property that can be set to save multiple thumbnails to the XMP packet by artboard when saving to a native Illustrator file?
Is there any chance to assign values to an artboard?
I've experimented with “tags”, but they only work for pageItems. (if the item which includes the stored data is deleted, the data is also deleted)
It is simple data like v1=true, v2=false, … I want to assign. And it needs to be saved within the illustrator document.
I'm having some issues with my file when trying to Save For Web. A band of transparency appears above my image even though I have everything cropped to the artboard, and the artboard is exactly the size I want the final image to be. If I uncheck "Clip to Artboard" the band of transparency disappears from the top, but reappears on the right side. It seems as if the artboard area is calculated differently in the Save For Web screen; its slightly off. I've included some images so you can see the issue.
Trying to save for web as a .png with "Clip To Artboard" selected; a tiny (one pixel tall?) band of transparency on the top of the image.
Trying to save for web as a .png without "Clip To Artboard" selected; the image seems to shift and the band of transparency appears on the right size. Also some of the pieces of the image appear on the bottom outside of the artboard.
I made sure to crop each element of my image to fit exactly on the artboard. Previously, I had made sure to use a clipping mask exactly the size of the artboard and still had these issues. I would like my .png to not have a band of transparency. It has the same issue when I change it to .jpg, but instead has a white matte band. What am I doing wrong, or is this just an issue with Illustrator?
When I record a save for web action that exports my artboard in 3 file sizes. 100%, 200% and 400% it works for the first few files.
Then suddenly after a while the first export changes its width and height from 100% to 111%, but not just 111% width and height equally. No it pulls it out of proportion too.
When I manually enter 100% again it all pops back to the correct aspect ration.The 200% and 400% still behave as expected.
If I rerecord it it starts working again. But that defeats the purpose.
When I have a multi page Ai fil e (50 pages) and 'Save as', it saves more than just the single page I specified (ie. Range 1-1)... it saves all 50 over again? How do I just save 1 of the 50?
View 1 Replies View Related1.) I dragged out vertical and horizontal guides from the rulers and then created a new art board. The new art board now has the horizontal guides carried over from the first art board. How can I have separate guides on each of my art boards? I am using art board rulers.
2.) Is there a way to layout vertical and horizontal guides on an art board and copy them over to a new blank art board?
i have around 500 eps formats images with different artboard size.
i need to resize the artboard to A4 size and the images to be placed in the centre of the artboard.
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedIs there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.
View 4 Replies View RelatedI have tried saving my project as a PDF so that I can send to different people and print, but no matter which PDF options I chose in Illustrator's final step for saving as PDF I end up getting a PDF with nothing on it! It turns up as a blank page. If I do get a visible PDF it stays that way for only a few minutes and prints out in reversed colours!! This is bissare. Some Preferences or something of mine are wack??
View 1 Replies View RelatedThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View Related! would assume that something like this has been made but i cant for the life of me find it when shall i find a plugin or default way of doing this i have about 50 layers that need saving as an image each and the idea of doing it by hand scares me.
View 6 Replies View Relatedwe have simple assemblies with bolted weldments and few misc. parts. most assemblies are 3-20 parts a typical project would have:
-a few laser cut parts, some plastic and hardware. these items need to have part drawings sent to a vendor.
-some in house cretaed parts that need a drawing
-assembly drawing for our shop
i think i am seeing that by having one single IDW its getting hard to send all the drawings to the people that need them. an example would be if a vendor calls about one part, i may send him a 4 page PDF and tell him to look on sheet 2.the other issue that i have is that my standard work flow is:
-design a product
-hand of to another dept for them to enter SKU numbers for parts and assemblies.
so my file names never match what the final product name is. i have been using fields in the iPROP, but it would be nice to revise file names when SKUs are created. im guessing vault would be the tool for something like that?
I have a problem with CorelDraw X4, some tools like save, save as, copy, cut, export doesn't work.
View 10 Replies View RelatedI have a big artboard with a simulation of a webpage, and a smaller artboard within it, where I'm designing the artwork, so that I know how the big picture will look. In the end, I intend to export the contents of the small artboard. The problem is that whenever I click by accident on the small artboard, my view of the web page gets off-centre.So in short, If I could just lock the small artboard, that would solve this annoyance. For now, I have two options: either delete the artboard and set it back in the end (it's got to be perfeclty positioned though) or, quite practically, just create a custom view with a shortcut that I can use instead of the "Actual size" one (Cmd+1).
View 18 Replies View RelatedI have a bunch of artwork that I need to fit to artboards that need to be the same size, basically I'm looking for something similar to "Fit to Frame" in Premiere/After Effects.
View 5 Replies View RelatedI'm designing some business cards, which have an 1/8" bleed, along with elements that hang outside of the border of the card. Is there a way in Illustrator CS3 that I can say, "hide everything outside of the Artboard" so I can see what the finished product will look like?
I know I could print them out or output to PDF and see it without the non-Artboard items, but these approaches seem clumsy and labor intensive. I'd like it if I could have some sort of "cropped view"--where everything not on the Artboard is hidden--to work in.
I'm finding that when i add a second artboard to an existing ai, then save and close, it has disappeared on reopening.
I have both pieces of artwork (one for each page), but 1 of the artboards will have disappeared. Irritatingly the remaining artboard sits between the 2 pieces of artwork - in the wrong position for both!!!
I am struggling with the "sAIArtSet->MatchingArtSet()" in restricting it to find the artset from the selected artboard only.
One way is to iterate through the found art set and compare art's artboard index with the index of the selected artboard. Wanted to know if there is some internal SDK suite which does this iteration in a more optimized way ?