When I have a multi page Ai fil e (50 pages) and 'Save as', it saves more than just the single page I specified (ie. Range 1-1)... it saves all 50 over again? How do I just save 1 of the 50?
View 1 RepliesThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View Relatedhow to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
View 8 Replies View RelatedI made 30-page PDF file in Illustrator last week.
Yesterday my co-woker eited and sent to me. But i can't open 30-pages all in once, instead of this window pops up and only 1 page of all open it. How do I open all the page and edit it once without any script?
What if I have created 7 logo versions. I want the client to view these 7 versions as one file (maybe one PDF file with 1 logo per page). Each logo version is on its own layer in Illustrator right now. How do I convert each logo/layer to a multi-page PDF file? Since this is just for viewing, I don’t have to submit EPS files yet to the client.
View 7 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
How do i download multipage pdfs within the Adobe illustrator program? I know it is some sort of module within scrips..
View 11 Replies View Relatedused to be able to do it easily in CS but doesnt seem to be available when saving a PDF file in CC?
View 7 Replies View RelatedNow, i have some problem about plot many page that contain in 1 file same this pic >>
[URL]........
I have many files and i want to save time to plot (=o=!!).
My Windows 7 PC does have CS5 installed. I also have a full Office 2010.
I've got 32 TIF files, each the page of a comic book. i want to crete a 32 page PDF file. Turning one tiff into one PDF in Photoshop is easy. But two or more into a single pdf document... I don't see how.
I went to some other forums and was called 'stupid', 'lazy' etc. and am very frustarted at this. I simply cannot spend any more time researching because I have wasted days doing just that.
I know that if I use IMPORTOBJ I can import an excel file....but the file is multiple pages (within the same workbook page). Is there a way to bring that in withought breaking up the Excel file into mulitple files?
View 1 Replies View RelatedWhen opening a multi-page TIF file, there are options to open a specific page, a range of pages, or all pages. Unfortunately, the options for range of pages or all pages are dimmed, and cannot be selected. What can we not select these other options?
View 1 Replies View RelatedI quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
My custom artboards no longer crop graphics properly. Instead of a specific targeted crop area, it just creates a jpg or png of ALL art on displayed layer. What did I turn on or off? Yeah, exporting the graphics works, but I want to control the final image size and preview too. What happened?
View 3 Replies View RelatedI'm new to scripting What I want to do and don't know how to go about it is to run a script that collects the saved file name and the full path where the file is saved on the network and displays it on my document.
View 2 Replies View RelatedWe received a jpg file that seems to gave 2 pages when you view it in Bridge.
When we open the file in Photoshop or link it in Indesign or Illustrator we only see the 1st page or view of the file.
I was very surprised to see this in Bridge, as far as I know it is not possible to even make a multi page jpg file.
I am trying to create an action that would open a muli-page PDF file, select all the pages and place each page on its own layer, in the same Photoshop document.
Right now, it makes a new document in Photoshop of each page? Is there anyway to do this? With or without making an action?
I have created 8 A4-sized PSD documents in Photoshop CS3 and I would like to create a single PDF document with 8 pages.
View 10 Replies View RelatedI am using AutoCAD LT 2009. I have AcrobatPro installed on my machine as well.
I seem to have lost my ability to publish a a bunch of dwg files and have one PDF file as the output. It used to work fine...I would hit publish, add all my dwgs (all model tabs), configure all page setups to be one of my Adobe PDF options (I have few configured, one for color, gray, B&W, etc), hit the publish button and then adobe would be prompt me for a file name, and then voila - I have one multi-page PDF of my drawing set.
Where it got lost and what happened, I don't know. As for trying to fix it, I have tried everything below, but nothing that gets me back to where I was:
1. Tried using the built-in "DWG to PDF." At best, this will automatically generate a PDF for each drawing without any input from me. I then used Adobe to combine all the drawings into one file. I could live with this, however, the resolution of the PDF's is not enough. I even tried changing the resolution setting to 1200dpi...stills comes out bad.
2. Using the "Adobe PDF." I get prompted by adobe for a filename for each dwg. This is very tedious. However, the output files look nice and much better resolution than #1.
3. There seem to be a lot of mention in hte forums to a system variable PUBLISHCOLLATE. This does not exist in my list of system variables (maybe because I am using LT). I tried setenv command to create the variable and toggle it from 0 to 1...this does not affect anything.
4. Within the Publish Dialogue - There is no mention of PDF anywhere. My only options for 'Publish to' are 'Plotter named in the setup' or 'DWF'. Within the Publish Options, nothing related to PDF...only options for DWF. I have tried changing these anyway, not affect.
5. Toying the pc3 - I tried changing some settings with PC3 file (Adobe PDF and DWG to PDF)...nothing fixed the problem. I tried setting collate from NONE to REGULAR, tried changing port to AUTOSPOOL, PLOT TO FILE, PLOT TO THE FOLLOWING PORT...nothing worked.
! would assume that something like this has been made but i cant for the life of me find it when shall i find a plugin or default way of doing this i have about 50 layers that need saving as an image each and the idea of doing it by hand scares me.
View 6 Replies View RelatedI have a multi page document that has twice the size I originally I thought it would so have decided to split it. What is the best way to do this?
I can only think of copy and paste each individual page into a new doc but if there is another way to chose multi pages by the tabs at the bottom.
I have several multi-page X6 documents, all with the same layout (chapters of a booklet), which I would like to combine into one document. Is there an easy way to do this?
View 13 Replies View RelatedI'm coming from paint.net, which is bloating tif images to the extreme......I work on tif's for work (engineering revisions) as well as multi-page tifs.Needless to say, I need to get up to speed on Gimp as fast as possible, as work places don't like a learning curve The image editor used by others is atrocious.
I see the Gimp will open multi-page tifs, but how do I save them back as multi-page? Or is this not possible?
And how do I go about drawing a filled rectangle? A good deal of my work is digitally "whiting out" things on technical drawings. I see the brush tool, but not a filled rectangle.
I have CS5, and someone sent an .ai file that was created in CS6, and I am unable to open and edit page 2. Ideally, I would like to be able to have both pages open in one doc as artboards, however, if need be, I'm happy to just open page 2.If it matters, I have Mac OSX Lion 10.7.5.
View 3 Replies View RelatedI am creating printable PDF files and up to yesterday I was using a free trial of PSE 10. To create a multi page document I first saved it as a PSE project file, then added blank pages, then when I was done I saved it as a PDF and voila - done!
Now my trial has run out I have bought the paid version (which is now version 11) and I seem to have lost that option entirely. The product is useless to me without a way to create multi page PDFs
Alternatively can I downgrade back to PSE10 which was fine for me!
According to the Help for Lightroom V1.0, I can choose to print my identity plate on each image on the page:
>To have the identity plate appear on every photo in a multiphoto template, select Render On Every Image. The identity plate is centered on each photo and can be moved, scaled, or rotated using the controls in the Overlays panel.
I can move the ID if it is rendered only on one image.
I cannot figure out how to move the ID plate once I have clicked "render on every image." It seems to be fixed in the center of each image.
When I do a data merge and select multi records it shift them way off the page. The only time it does the multi page correctly is when I use the default page size (8.5x11). This happens whether I preview it or export it with out the preview. Is there a patch coming out for this or asome setting I am missing? My CS5 did not have this issue.
View 1 Replies View RelatedI am a Graphic Designer for a print shop and we just had a large document printed that looked to be in black and white but must have been in color somewhere (gray boxes) and used more clicks on the printer than we wanted. I'm wondering if there is a quick way to check a document like this in CS5 programs to see if it is truly in black and white or if there is something in there that is RGB or CMYK.
View 7 Replies View RelatedI'm using the macro that's on this page.
[URL]......
If this can be modified to not save the file name as it does now...like this
44649.cdr1.JPG
We need it to save it like
44649-1.jpg
44649-2.jpg
44649-3.jpg
We can make multi master pages for ODD and EVEN pages.
View 1 Replies View RelatedWhen importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.