When saving for web or exporting an artboard is there any way to pre-populate the save file name dialog box with the artboard's given name. It would save having to re-name the file and make good use of that metadata.
View 4 RepliesI've created an image that has some bleeds and needs to be saved as a JPEG for web display. If I just export it (or save for web and devices), the off-artboard stuff shows up in the saved image (which, of course, is bigger than the artboard). I've created a mask layer that masks the visibility of the excess artwork within AI and the saved file, but the off-artboard area occupied by the masked artwork is still there in the saved image. How can I non-destructively hide this stuff during saves, saving just the artboard?
View 2 Replies View RelatedWhen I record a save for web action that exports my artboard in 3 file sizes. 100%, 200% and 400% it works for the first few files.
Then suddenly after a while the first export changes its width and height from 100% to 111%, but not just 111% width and height equally. No it pulls it out of proportion too.
When I manually enter 100% again it all pops back to the correct aspect ration.The 200% and 400% still behave as expected.
If I rerecord it it starts working again. But that defeats the purpose.
Illustrator cs5 will not export to artboard, even though the artboard is properly set and "Use artboards" is clicked in export dialogue box.
Bleed areas are set and crop marks, all of which print fine. But I want to export to jpeg just to see how the cropped output will look.
Is there a way in Illustrator CS6 to export as jpg with Use Artboard check to not have illustrator add the name of the artboard to your file name?
Example -
File name "redboat.ai"
Export jpg "redboat.jpg" with Use Artboard option selected
File name becomes "redboat-01.jpg"
This is not a huge problem when I only have 1 or two files but when I have to rename 100+ file names it can be a pain.
I do understand that I can batch rename in Bridge but it would be nice if I could have these files saved without the artboard name on them.
I have a AI CS6 file with 16 artboards. I need to 'save for web" a jpg of each artboard. Is there a way to automate this, by setting up an action - or is there any way to do this? I'll be having to do it frequently.
View 16 Replies View RelatedI have tried googling this and am able to save each artboard as a jpg but not as an eps or ai file.
View 6 Replies View RelatedI all, I'm working on a file that I have setup as 1045 px by 154 px. When I export this file to jpeg, png or bmp the file become over 4000 px wide. This is likely an easy thing I'm missing.
View 8 Replies View RelatedSee title - is this possible?
I've made this small script to test a few things, before moving on to the bigger stuff (some of it have been cut out, since it's not important):
var exportOptions = new ExportOptionsJPEG();
var type = ExportType.JPEG;
var fileSpec = new File(dest);
exportOptions.antiAliasing = false;
exportOptions.qualitySetting = 70;
exportOptions.artboardRange = "3";
app.activeDocument.exportFile( fileSpec, type, exportOptions );
I'm trying to export artboard #3 as a JPEG. But it doesn't work.
According to the scripting reference guide, most of the "ExportOptions"-functions support the artboardRange-parameter, but alas - JPEG does not.
Is there another way to do this? Right now I'm only getting all the artboards into a single JPEG-file, which is not what I'm searching for
How can i export only the artboard as PSD? When i use this script a lot more is exported.
with timeout of (10 * 60) seconds
tell application "Adobe Illustrator"
activate
set dpi to 90 as text
set documentnaam to name of current document
[Code] ....
I have setup a display panel with 4boards at various sizes. (Spreads). I now need to make a PDF but as artboard spreads as this is needs to be shown like this for sign off.
Illustrator cs6
The first time it happened, I uninstalled AI and did a fresh install which fixed it for a short time. When I save a PDF out of AI, it does not save to the artboard constraints. This is a screen shot of my AI document which has 2 pages.
When I save as PDF, this is what the file looks like:
(Pg 1)
(Pg 2)
After the original file has been saved (incorrectly) I can open it and save it again and it will be fine.
I have a CS5 document with two artboards. Can I save the artboards to separate files? The File | Export command doesn't support the AI format and the "Use Artboards" option is disabled when using the File | Save As command.
View 6 Replies View RelatedIllustrator CC: how do I save my svg with artboard size?
It looks right when I open it in Illustrator, but in finder is still letter size.
I recently upgraded to Illustrator CS6, and suddenly clients have been remarking that the file sizes are wrong or there's "a ton of white space around the logo." I checked it out, and sure enough, it appears that whenever I export a file, it does not crop it to the image boundary like it used to, even if I had manually adjusted the artboard to fit closely around it. After a bit of trial and error, I discovered that I have to click "Use Artboards" on the Export dialog each time. The super annoying part is that it doesn't STAY checked, AND it adds a number to the end of the file name. So I often forget to check it (not used to the extra step in workflow), and if I make a modification to the file, I can't just export over the previous version. It requires me to export it, go find it in finder, and manually delete the extra number off the file name. The extra steps are adding way too much time when I'm saving out many files. I'm about ready to go back to my previous version just from this alone.
Is there an easier way to do this? It seems like the addition of this feature would only cause extra problems...
My custom artboards no longer crop graphics properly. Instead of a specific targeted crop area, it just creates a jpg or png of ALL art on displayed layer. What did I turn on or off? Yeah, exporting the graphics works, but I want to control the final image size and preview too. What happened?
View 3 Replies View RelatedIs it possible to save illustrator XMP thumbnail previews by artboard? It seems like Illustrator saves a single thumbnail with all art regardless of the number of artboards.
If there is a property that can be set to save multiple thumbnails to the XMP packet by artboard when saving to a native Illustrator file?
Is there any chance to assign values to an artboard?
I've experimented with “tags”, but they only work for pageItems. (if the item which includes the stored data is deleted, the data is also deleted)
It is simple data like v1=true, v2=false, … I want to assign. And it needs to be saved within the illustrator document.
I'm having some issues with my file when trying to Save For Web. A band of transparency appears above my image even though I have everything cropped to the artboard, and the artboard is exactly the size I want the final image to be. If I uncheck "Clip to Artboard" the band of transparency disappears from the top, but reappears on the right side. It seems as if the artboard area is calculated differently in the Save For Web screen; its slightly off. I've included some images so you can see the issue.
Trying to save for web as a .png with "Clip To Artboard" selected; a tiny (one pixel tall?) band of transparency on the top of the image.
Trying to save for web as a .png without "Clip To Artboard" selected; the image seems to shift and the band of transparency appears on the right size. Also some of the pieces of the image appear on the bottom outside of the artboard.
I made sure to crop each element of my image to fit exactly on the artboard. Previously, I had made sure to use a clipping mask exactly the size of the artboard and still had these issues. I would like my .png to not have a band of transparency. It has the same issue when I change it to .jpg, but instead has a white matte band. What am I doing wrong, or is this just an issue with Illustrator?
1.) I dragged out vertical and horizontal guides from the rulers and then created a new art board. The new art board now has the horizontal guides carried over from the first art board. How can I have separate guides on each of my art boards? I am using art board rulers.
2.) Is there a way to layout vertical and horizontal guides on an art board and copy them over to a new blank art board?
i have around 500 eps formats images with different artboard size.
i need to resize the artboard to A4 size and the images to be placed in the centre of the artboard.
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedIs there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.
View 4 Replies View Relatedsince a month, when i try to save a job in adobe illustrator cs 5, it appears "unknowned error" (italian version) and i can't save my job! i tried to save as pdf, as ai, to export as a jpg, nothing is possible!
i uninstalled all the software and i instaleld again: sometime it goes well, but evryday i have this problem
Currently running on MAC OS Mountain Lion. Illustrator CS6, Creative Cloud Download - Up-to-date
Tested using a small file size and art board, and both save for devices and exporting just gives a loading wheel with no results (let it go for 2 hours before restarting). We have tried reinstalling program with no change in results. The process works fine with the same creative cloud account on a Mac running Lion.
In Illustrator CS5, how can I save or export a set of Artboards in a given .ai file to separate SVG files?
The 'Use Artboards' feature is on the Save As... dialog but it's disabled. It looks like there was an extension (Illustrator HTML5 Pack for CS5) available at one time but its appears to have been removed from Adobe's site.
Export Multiple Artboards with Save for Web?
View 4 Replies View RelatedI'm am SO DEVASTATED that CS6 got rid of the option to save as CSS layers in Save for Web. I just updated from 5 to 6 and now I'm looking for an alternative but am having no luck. I've tried some scripts I've found online but none of them work the way I need, or at all.
I do animation in AI where each layer is a frame on the animation. In CS5 I could Save for Web and check the Export as CSS Layers box. This would export all the layers in my AI file to pngs, where each layer is it's own png file, in one folder. I could then import them as an image sequence in Photoshop and turn layers on and off with each frame to create my animation.
I tried exporting my AI file to a PSD file with maximum editability but the more complicated the animation (meaning the more layers and the more objects on each layer) it would start flattening layers without warning. Not to mention the rendering time just opening the file in Photoshop and then trying to save it there once I had created all my frames. Photoshop froze on me 6 times this morning while I was trying things out.
I'm desperate for a simple way to do the CSS layer trick. If I can't find one, I'm going to have to go back to CS5 permanently, or until I can find a solution.
I am using Illustrator CS6 on OS X 10.8.4. Anything that rasterizes the artwork causes Illustrator to hang. Export (PNG), Save for Web, Filters like Drop Shadow or Gaussian Blur (even when just checking the preview box).
I've read through some discussions that suggested:
– Uninstalling the entire CS6 suite and re-intalling it
– Going into Disk Utitlity and 'Repair Permissions'
– Creating a new user account on my Macbook, deleted the old user account and re-installed the CS6 suite
But none of the above suggestions worked. As soon as I create a new user account Illustrator began to crash again upon export the next of couple days.
I have white text on top of colored shapes in my Illustrator file. When I export to a PDF or a PNG, my white text does not export and display in the final version.
View 1 Replies View RelatedIllustrator incorrectly crops artwork too small by a few pixel when using Save for Web or Export. If you fit an artboard to your artwork, either manually using smart guides or by using the "Fit to Selected" command, it will look correct in the work area but when you go to Save for Web it will be noticeably truncated on the right and bottom sides. If all the artwork is supposed to be within the artboard then toggling "Clip to Artboard" will actually change the size of the exported image by 1 or 2 pixels when it shouldn't change at all.
View 2 Replies View Related