I all, I'm working on a file that I have setup as 1045 px by 154 px. When I export this file to jpeg, png or bmp the file become over 4000 px wide. This is likely an easy thing I'm missing.
View 8 Replies
I recently upgraded to Illustrator CS6, and suddenly clients have been remarking that the file sizes are wrong or there's "a ton of white space around the logo." I checked it out, and sure enough, it appears that whenever I export a file, it does not crop it to the image boundary like it used to, even if I had manually adjusted the artboard to fit closely around it. After a bit of trial and error, I discovered that I have to click "Use Artboards" on the Export dialog each time. The super annoying part is that it doesn't STAY checked, AND it adds a number to the end of the file name. So I often forget to check it (not used to the extra step in workflow), and if I make a modification to the file, I can't just export over the previous version. It requires me to export it, go find it in finder, and manually delete the extra number off the file name. The extra steps are adding way too much time when I'm saving out many files. I'm about ready to go back to my previous version just from this alone.
Is there an easier way to do this? It seems like the addition of this feature would only cause extra problems...
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View Relatedi have around 500 eps formats images with different artboard size.
i need to resize the artboard to A4 size and the images to be placed in the centre of the artboard.
When I record a save for web action that exports my artboard in 3 file sizes. 100%, 200% and 400% it works for the first few files.
Then suddenly after a while the first export changes its width and height from 100% to 111%, but not just 111% width and height equally. No it pulls it out of proportion too.
When I manually enter 100% again it all pops back to the correct aspect ration.The 200% and 400% still behave as expected.
If I rerecord it it starts working again. But that defeats the purpose.
I am using trial of Adobe Illustrator CS5. When ever I export file (RGB) to PNG or JPG format, there is size difference of 1px in width or hight or both. But when I save that file with Save for Web & Devices option, then there is no such issue.
I have tested with so many files.I didn't faced such problem with Illustrator 4.
Illustrator cs5 will not export to artboard, even though the artboard is properly set and "Use artboards" is clicked in export dialogue box.
Bleed areas are set and crop marks, all of which print fine. But I want to export to jpeg just to see how the cropped output will look.
When saving for web or exporting an artboard is there any way to pre-populate the save file name dialog box with the artboard's given name. It would save having to re-name the file and make good use of that metadata.
View 4 Replies View RelatedIs there a way in Illustrator CS6 to export as jpg with Use Artboard check to not have illustrator add the name of the artboard to your file name?
Example -
File name "redboat.ai"
Export jpg "redboat.jpg" with Use Artboard option selected
File name becomes "redboat-01.jpg"
This is not a huge problem when I only have 1 or two files but when I have to rename 100+ file names it can be a pain.
I do understand that I can batch rename in Bridge but it would be nice if I could have these files saved without the artboard name on them.
I've created an image file in Illustrator and exported it as a .png file. The dimensions are 1000x200 but when I export it the file size changes and becomes bigger. I therefore have to change the file size in Fireworks making sure that the quality is kept as Photoshop does not do it for me. Previously when I exported the files the backgrounds appeared transparent after saving but maybe I've changed a setting by accident that has changed this. I'm selecting the 'Save as' and Flattened png option at 32bit in FW.
View 2 Replies View RelatedWe currently use CS3 in our Art Dept at the sign company I work for. Sometimes designing/layout for some projects can be a pain when they go beyond the max artboard size constraint in CS3. This is especially true in my dept which does all the large format digital printing. I find myself having to switch back and forth between some of my sign software, which has almost limitless area for design and layout. Not that we can't work in scales but life would be so much easier if we could do things in full scale. Now to the point, does CS4 have larger artboard size than CS3?
View 7 Replies View RelatedSaving as SVG (w/out AI editability) changes artboard size ...why? ai saves the artboard dimensions as the frame, unless it decides to expand the frame to accommodate extraneous material. what is weird and disappointing is that ai does not read these frame values back in to recreate the artboard; you have to use preserve ai capability which attaches huge code. How to get it to retain the chosen artboard size?
View 2 Replies View RelatedI just opened a template but this one got the artboard dimensions set to "pt"..I went into preferences settings and It was already set into "inches"..Even when I want to resize the artboard (shift+O) it's still the same..
View 3 Replies View RelatedIllustrator CC: how do I save my svg with artboard size?
It looks right when I open it in Illustrator, but in finder is still letter size.
See title - is this possible?
I've made this small script to test a few things, before moving on to the bigger stuff (some of it have been cut out, since it's not important):
var exportOptions = new ExportOptionsJPEG();
var type = ExportType.JPEG;
var fileSpec = new File(dest);
exportOptions.antiAliasing = false;
exportOptions.qualitySetting = 70;
exportOptions.artboardRange = "3";
app.activeDocument.exportFile( fileSpec, type, exportOptions );
I'm trying to export artboard #3 as a JPEG. But it doesn't work.
According to the scripting reference guide, most of the "ExportOptions"-functions support the artboardRange-parameter, but alas - JPEG does not.
Is there another way to do this? Right now I'm only getting all the artboards into a single JPEG-file, which is not what I'm searching for
How can i export only the artboard as PSD? When i use this script a lot more is exported.
with timeout of (10 * 60) seconds
tell application "Adobe Illustrator"
activate
set dpi to 90 as text
set documentnaam to name of current document
[Code] ....
Is there a plug in to resize the canvas size in Illustrator CS6? Not the artboard, the canvas size
View 5 Replies View RelatedI'm in CS6 and have an .ai file that I need to first crop to 1200 x 600. I do not know the size / dimensions of the .ai , where can I find?
Inside the artboard I select the Artboard tool and I first need to crop the image to the same size the black dashes are within the red solid line.
I would normally just go to save for web and set the new size there but I need to save this cropped file as a layered pdf. I know hwo to do that but I need to know how to find the current size of the .ai file, then crop it down.
When I create a new file in AI CS 6, the artboard is larger than requested size, which shows up as a box within the too-big artboard. For example, when I create a new file, I set the artboard size menu to 1200 pixels wide by 750 pixels high, but the artboard created is about 6,000 pixels high and wide, with a black outline of the 1200 x 750 artboard that I tried to create.The actual artboard is much larger than the white area; I just cropped most of it in my photo software to show it here. What setting in the preferences or other menus fixes this problem? I didn't have it until today, so something got set incorrectly somewhere. I usually just see the 1200 x 750 white artboard against the dark background. It also seems to be happening now when I simply open an existing file. The artboard has suddenly increased to an enormous size.
View 9 Replies View RelatedI was using a custom size of artboard in illustrator, but I now I want to change it to A4 size for printing. However, when I change it to a A4 size artboard, the size of objects on that artboard remain unchange. As a result these objects do not fit the new size of artboard. Are there any way that I can change both the size of artboard and objects at once?
View 6 Replies View RelatedI've created an image that has some bleeds and needs to be saved as a JPEG for web display. If I just export it (or save for web and devices), the off-artboard stuff shows up in the saved image (which, of course, is bigger than the artboard). I've created a mask layer that masks the visibility of the excess artwork within AI and the saved file, but the off-artboard area occupied by the masked artwork is still there in the saved image. How can I non-destructively hide this stuff during saves, saving just the artboard?
View 2 Replies View RelatedI'm working in CS6.
As I recall, you used to be able to change the artboard size when you first hit shift + O. There was a window for it at the top of the screen. Now,..for some reason that option is not there. It only gives me the ability to change the x and y coordinates. I have to double click the artboard tool to change the size of the artboard(s). How do I get back that ability?
I am making a website on Illustrator 1,200 px 1,200 px. When i export it to .PSD i open it as a much larger file in pixels than this and with a whole Canvas/ Artbord white area which i don't need.
Is there any way to keep the page size like the final ouput without the white canvas area in the export?
trying to make an object the exact size of the artboard. This is something I do on a daily basis for several different reasons and it would be very useful if this can happen automatically for whatever size the artboard may be. As I understand it the only way is with a script but I have no experience with making illustrator scripts, im definately no programmer. I have set up quickkeys in the past to copy from the artboard inputs when you are on the artboard tool but these round to the nearest .01 and this is not accurate enough for what I am working with. Also if I do this with multiple pages open illustrator is very slow to respond to the artboard tool.
Below is a script that I saw on here that I believe may contain what I need but now knowing programming. Where to start on editing. All I need is the part where an object is placed on the artboard that is the exact same size as the artboard.
#target illustrator function main() { if (app.documents.length == 0) { alert('Open a document before running this script'); return; // Stop script here no doc open… } else { var docRef = app.activeDocument; with (docRef) { if (selection.length == 0)
[Code].....
I create the designs on an art board that matches the screen size of whatever device I'm designing for, for instance 320x480px. The problem comes when I want to read the font sizes used in the design in order to apply them in the actual mobile app. Illustrator seems to use a strict 1px = 1pt rule. That means a 12pt font in Illustrator is always 12 pixels. This is however not true on the mobile device, which uses some other ratio. This means I have to "guess" the font sizes, trial-and-error style, which is ridiculous.
I've tried downsizing the art board, to something like 240x360 px, and then the font sizes do better represent those on the mobile device, but then all the graphics does not. So that's a no go.
Is there any way I can define in Illustrator the ratio between pixels and points? It seems Illustrator only supports a default 1 pixel = 1 point setting? (In Photoshop, for instance, this is not a problem as you can set the intended physical size of the document independently from the pixel grid. Any way to do this in Illustrator? Does Illustrator simply assume pixels is a physical unit, like inches and points?
I'm trying to resize my artboard to an exact mm size via a script so then I can add this to a batch i'm trying to achieve.
I've been trying to use the following, but i cant work out how to add the size I want in mm?
#target illustrator
var doc = app.activeDocument;
var docVB = doc.visibleBounds;
var myVisibleBounds = doc.visibleBounds; //Rect, which is an array;
myVisibleBounds[0] -= 20; //left coordinate (use negative values to add artboard)
myVisibleBounds[1] += 20; //ltop coordinate
myVisibleBounds[2] += 20; //right coordinate
myVisibleBounds[3] -= 20; //bottom coordinate (use negative values to add artboard)
doc.artboards[0].artboardRect = myVisibleBounds;
coming from CS3 to CS6 I would like to input artboard size and add crop marks to the board. Is this gone?
View 6 Replies View RelatedI increased my document from 8.5"x11" to 22"x34" and a black line of the original document remains. It is not selectable - the word "x page" appears when my cursor hovers on it. I'm working in C6.
View 4 Replies View Related1.) I dragged out vertical and horizontal guides from the rulers and then created a new art board. The new art board now has the horizontal guides carried over from the first art board. How can I have separate guides on each of my art boards? I am using art board rulers.
2.) Is there a way to layout vertical and horizontal guides on an art board and copy them over to a new blank art board?
I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time.
View 4 Replies View RelatedI have recently upgraded to 2.8 and am having problems with export to jpg, as opposed to old system of 'Save As" jpg.
When "Show preview in image window" is ticked, File size always appears as 1.3GB. If 'Quality' is reduced, file size displayed does not change to a new reading as it used to.
When I go ahead and export, the file is much smaller than 1.3GB. What do I need to do to get the file size in 'Export Image as JPEG' window to show an accurate file size?
Using Windows 7.
