While "Draw" of Coreldraw X5 is working well, Corel Photopaint X5 does not "Save", "Save as..." or "Export" files. It just does nothing, when I choose to save a file under "something.cpt". It works, as long as it is a JPG, but not as a CPT. I am working on a Win7, with CorelX5 in german. Support told me to reinstall.
View 15 RepliesI am doing a lot of saving new files over old ones. I am sick of the warning message that pops up having a default answer of 'NO' when I go to replace the files. Is there a way to change the default to 'YES' , or get rid of the message altogether?
View 1 Replies View RelatedTrying to edit and save this file fails silently, because Photo-PAINT does get confused by a file name like this: "filename.morename.extension". Nothing gets saved.
The actual file name taken from my example file is: "Flag_of_Germany.svg.png".
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Just installed CorelDraw Graphic Suite X5.... version : 15.2.0.661
The "Save" command or "Save as" does not work for me in Photo-paint X5.
The patch does not want to install.
I would like to save only one of the color channels, for example the magenta channel of my .tiff image. How do I do that? Every time I save my image I just get a grayscale image, even though I'm able to see the magenta channel just fine.
View 5 Replies View RelatedThe plague has struck my X4. I have done absolutely nothing to the computer in over two years. I can't save a file as a JPEG to most folders using Save AS. It will save a file as a JPEG to the TEMP folder -- but the preview in which I can set compression does not show up. However, it still works well if I Export to Web.
View 10 Replies View RelatedI would like to save the workspace to a CD as a backup in case the one in use becomes degraded. Can this be done. If so, what files should I save.
View 4 Replies View RelatedEvery time I want to save an PNG image with no background corel keeps merging the object with the background, so it creates a white background. Even if I only open and click save a png image it merges with the background.
View 1 Replies View Related The Photo Paint program can save an image in several formats. However, I do not see an option to save an image file in the .png (portable network graphics) format.
Is it possible to save an image in the .png format using Photo Paint?
Corel photopaint crashes each time you try to save an image with W 8.1
View 2 Replies View RelatedI am trying to save a tif file to gif and at the same time setting the white background transparent. I did this in Corel Photo Paint 11 with the following
Call PhotoPaint11App.CorelScript.FilterGIF(0, 0, 1, 1, 0, 0, 0, 0) Call PhotoPaint11App.CorelScript.FileSave(gWebFolderMain & gMVID & "-NakkeO.gif", PHOTOPAINT.cdrFilter.cdrGIF, 0)
Now in Corel Photo Paint X5 this doesn't work any more. What have changed and what am I doing wrong. According to documentation it seems to be correct.
A digi image, cropped (crop tool), resized (resample), and saved (save as). Everything on 'default' (usual settings for this) or as I would like. Close and re-open, the image shows as the cropped image, but the thumbnail is the original.
I bought a new camera card today, having run out of settings to try. Took a pic, copied over, and it cropped and saved fine. So I went back to those taken yesterday, still full image thumbnail. Took new ones on new card, but full image thumbnails. Recropped the original photo that saved earlier today with cropped thumbnail - the full image is now in its thumbnail.
I wanted to convte an image to a quadtone then paste the original color image as a new object-layer beneath it, then experiment with the two with blending and masking techniques. But,When I try to save the quadtone image as a tiff, the option to do so isn't there. Only CPT, PSD and a few other options are avilable.
When I copy and paste the original image as a new object, it's also automatically converted to the quadtone of the layer beneath it.
Till X3 Photo-Paint opened and saved transparent PNGs as a seperate image with attached mask.Example:I have an image and load a B/W mask into it.
When I save this as PNG and reload it in X3, Photo-Paint displays again exactly what I have just saved:
However when I open this same PNG in X6, the image and mask get merged into a single object:
It's in effect doing automatically a "create object from selection" function and discards then the background.Why? I can't work with the full background image anymore, because the transparent parts are missing, and the mask is also gone. Is there no way to open the full PNG, without any merging and deleting of masks, just the way X3 was doing it?Also, the only way to save a transparent PNG in X6 is to check "save only selected objects"? When I don't check this, but still check "transparency" in the PNG export dialogue, then the mask won't be saved nonetheless.
I am not a master of Photo-Paint, I use Draw for most tasks, but here I think Photo-Paint would be the right tool. I want to resample an image and then add a 7 px drop shadow to it and then export it as a PNG for web (transparent drop shadow). The problem I encounter is at the export stage, as the whole paper size is exported, not just the object selected, as is the case in Draw. Is there any other option than to place the object in the upper left corner (coordinates 0, 0 ) resize the paper size to fit and then export?
View 5 Replies View RelatedWhen I assign an image map or URL to an object in PPX6 then proceed to Export to Web with HTML and slices selected, it does not export the HTML hyperlinks or image maps.
View 9 Replies View RelatedI think I've found a bug: PPX6 is not honoring the "maintain size" option while exporting as PNG.
To reproduce:
Create a new 24bits RGB 600dpi image.
Export it as PNG
Check the "maintain size" option (size controls get disabled)
Now change the "resolution" to 96.
Size now shows 0px 0px and scale 1%.
Uncheck the "maintain size" option and mark it again.
DPIs are now something like -491.
PhotoPaint X6 v16.0.0.707Windows 6.1 64bits 7601 SP1
how to make a PNG in PP so that there is not a residual trace of the background color. Notice on the picture below. There should be the white circle around the red circle, but then there is also the trace of yellow, which is the background color (and what I chose under PNG Export as the Transparency > Image Color. This has always happened for me using PP and PNGs, and I assume there must be some setting to avoid that so there's a smooth PNG export, but I can't seem to figure it out.
View 3 Replies View Relatedproblems with the Export to JPEG dialog.
1. It does not show the original file size. At one time I used this as a cue to see if I had forgotten to resample.
2. After the installation of version 16.3, the displayed compressed file size is no longer accurate. It varies from perfect to reading 25% too high.
When I'm saving my file as PSD I have strange error with "nice" description.The only way to avoid it is search and delete design elements - I found that its caused by one text object.
The question is what can be wrong with text object to generate this error. I can edit text and do everything with it but I cant save it as PSD. Its hard to find it in big complicated designs. I think similiar problem was in Corel Photopaint X3. Seems like it left to X6 version.Bug exists in all files with text objects.
system configuration:Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version: X6 VERSION: 16.4.0.1280
When the Export To... dialogue box comes up, the image default is Zoom to Fit. Can I change the default to Zoom 1:1 pixel?
View 2 Replies View RelatedHere is what I am doing...
1) I have a transparent .png
2) I select the .png as an object
3) I assign this object a url and alt comment using the internet tool bar or the object properties dialog
4) I define the area as polygon
5) I Export For Web
6) Under HTML and Slices I Export image and HTML
7) I Save as... my .png image
8) It produce an html file with my image, but no hyperlinking or image mapping...
<html>
<head>
<title>image</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<meta http-equiv="Content-Script-Type" content="text/javascript"/>
<meta name="Generator" content="Corel PHOTO-PAINT 15.1"/>
</head>
<body bgcolor="#FFFFFF">
<img border="0" width="500" height="500" src="image.png">
</body>
</html>
I used to draw battleships in CorelDRAW3 when I was a kid.
Just installed the trial version of Corel Paintshop Photo Pro X3. Now I try to open old files made around 1999-2001 with Corel Photo Paint (from Office 7 Professional). None of the files are recognized. Funny thing is, WordPerfect X3 does recognize those files, and is able to import them in a document. But what do I have to do to be able to work with those files again in Corel Paintshop?? Or in any other photo-editing program for that matter?
View 5 Replies View RelatedFor some reason now when I import a high resolution bitmap file into Photo Paint for editing it reduces my dpi to an extremely low resolution. It just started doing this today.
View 5 Replies View RelatedOne of the reasons I have always liked PhotoPaint is because one can do some amount of video editing with it which is handy for animations or title frames to use in video editing programs. PhotoPaint has always been my preferred tool for making animated gifs from avi or mov files.
I see that it will open uncompressed avi or mov files but if they are compressed, it won't open them properly; such as showing the frames as solid black.
Is there a way to import additional codecs or filters or whatever for avi and mov into x5?
New installation on xp with sp3.
Open a graphic and saving or exporting as jpg, gif or png crashes the program without info or savings.
Same file saving as bmp, cpt, eps, tiff or psd works.
When I export a photo from lightroom to photoshop, work on it and click control/s it saves the file back into lightroom, but then I have to save it again to close photoshop or I get a dialog. Why am I having to save twice in a row when nothing has changed the document? Windows 7 photoshop cc lightroom 5.2.2
View 7 Replies View RelatedUsing 'PaintX6 64bit Win7
File - Batch Process - Add File - select several files (jpgs or tifs) - Open - Error....
Only first file added to list. Can continue to add files one at a time. Not really good for ,say , downsampling a list of hundreds of image.
I have a problem:
Movie > Create From Document > Insert From File > select multiple images and click OK = crash
Very sad. Because I have to insert over 100 frames and doing it one by one.
PP X5 SP3, Windows 7.
The Coreldraw Graphics Suite X5 is my first foray into this product since version 3 (way back when). PhotoPaint supports CR2 files.
Except that in my case it doesn't do so consistently. Files from my Canon 5D MkII occasionally open fine (just this evening, I started getting a problem withe these as well), but 7D files consistently crash the program and I have to exit.
I have SP3 installed.
This machine is a 6-month old 64-bit HP desktop (AMD multi-core processor) with 8 GB of RAM. Photoshop, Lightroom, Painter 12, and PSP X4 work without incident and open all supported files smoothly.
Question: How do I “Add” multiple TIFF files to a Batch Process so I don't get the "what page" question?The PP9 Batch Process Added – OPENED - files, processed according to my script, then saved the result to new type & folder.
X5, a recent purchase, does an IMPORT of TIFFs instead of an OPEN and wants to know what page I want to load. Answering this on each file defeats the purpose of batch processing. How I should write the script?