Every time I want to save an PNG image with no background corel keeps merging the object with the background, so it creates a white background. Even if I only open and click save a png image it merges with the background.
View 1 RepliesI am trying to save a tif file to gif and at the same time setting the white background transparent. I did this in Corel Photo Paint 11 with the following
Call PhotoPaint11App.CorelScript.FilterGIF(0, 0, 1, 1, 0, 0, 0, 0) Call PhotoPaint11App.CorelScript.FileSave(gWebFolderMain & gMVID & "-NakkeO.gif", PHOTOPAINT.cdrFilter.cdrGIF, 0)
Now in Corel Photo Paint X5 this doesn't work any more. What have changed and what am I doing wrong. According to documentation it seems to be correct.
removing a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
While "Draw" of Coreldraw X5 is working well, Corel Photopaint X5 does not "Save", "Save as..." or "Export" files. It just does nothing, when I choose to save a file under "something.cpt". It works, as long as it is a JPG, but not as a CPT. I am working on a Win7, with CorelX5 in german. Support told me to reinstall.
View 15 Replies View RelatedA customer sent me an RGB bitmap with a transparent background. I converted it to a grayscale and I erase it in PhotoPaint but can't paint over it. This isn't the original bitmap, I converted it and assumed that would get rid of any clip masks or other attributes.
Here's the bitmap as a JPEG.
Just installed CorelDraw Graphic Suite X5.... version : 15.2.0.661
The "Save" command or "Save as" does not work for me in Photo-paint X5.
The patch does not want to install.
I would like to save only one of the color channels, for example the magenta channel of my .tiff image. How do I do that? Every time I save my image I just get a grayscale image, even though I'm able to see the magenta channel just fine.
View 5 Replies View RelatedThe plague has struck my X4. I have done absolutely nothing to the computer in over two years. I can't save a file as a JPEG to most folders using Save AS. It will save a file as a JPEG to the TEMP folder -- but the preview in which I can set compression does not show up. However, it still works well if I Export to Web.
View 10 Replies View RelatedI have a scanned guest pass that is 2 color. The pass is in jpg format. although i can put it in any format necessary.
I need to change the "800" numbers on the pass. To the new number.
is it possible to remove them( numbers) and replace them, while keeping the background of the pass the same. if that make sense. I have Corel 6.
I am trying to delete an object background to create a gif of an object (the object in this case is a broken cell phone). Everything appears to be gone BUT...there are these flowing blue items around the object. When I export the file to gif...those items are still attached to the object.
I have used photo shop and have not had any issue removing a background around an object.
I cant find the makeover tool on my corel draw page?
View 2 Replies View RelatedI would like to save the workspace to a CD as a backup in case the one in use becomes degraded. Can this be done. If so, what files should I save.
View 4 Replies View Related The Photo Paint program can save an image in several formats. However, I do not see an option to save an image file in the .png (portable network graphics) format.
Is it possible to save an image in the .png format using Photo Paint?
how to make a PNG in PP so that there is not a residual trace of the background color. Notice on the picture below. There should be the white circle around the red circle, but then there is also the trace of yellow, which is the background color (and what I chose under PNG Export as the Transparency > Image Color. This has always happened for me using PP and PNGs, and I assume there must be some setting to avoid that so there's a smooth PNG export, but I can't seem to figure it out.
View 3 Replies View RelatedI want to change the background in the photo to a black or dark grey colour so the greetings card stands out
View 3 Replies View RelatedWhat is the best way to take the background out of a photo or a portrait and keep the photo? Also would like to be able to keep the edge nice so when am laser engraving it will look nice, and will be able to engrave well.
View 3 Replies View RelatedI am using Photo Paint 9 to edit photos I took of some watercolors I did. Many of the photos are of a single animal on a white background (similar to the California state flag). When I printed many of these out they had a greenish tint (not a printer problem) so I went to Image--Adjust--Color Balance.... I adjusted the cursor on the Magenta/Green bar to -15 (towards Magenta) and hit ok. The problem is, now when I print, the image is ok but the background which I want to be pure white now has a pinkish (magenta?) tint to it.
Is there any way to isolate the image and get the background pure white again?
Corel photopaint crashes each time you try to save an image with W 8.1
View 2 Replies View RelatedA digi image, cropped (crop tool), resized (resample), and saved (save as). Everything on 'default' (usual settings for this) or as I would like. Close and re-open, the image shows as the cropped image, but the thumbnail is the original.
I bought a new camera card today, having run out of settings to try. Took a pic, copied over, and it cropped and saved fine. So I went back to those taken yesterday, still full image thumbnail. Took new ones on new card, but full image thumbnails. Recropped the original photo that saved earlier today with cropped thumbnail - the full image is now in its thumbnail.
I am doing a lot of saving new files over old ones. I am sick of the warning message that pops up having a default answer of 'NO' when I go to replace the files. Is there a way to change the default to 'YES' , or get rid of the message altogether?
View 1 Replies View RelatedI wanted to convte an image to a quadtone then paste the original color image as a new object-layer beneath it, then experiment with the two with blending and masking techniques. But,When I try to save the quadtone image as a tiff, the option to do so isn't there. Only CPT, PSD and a few other options are avilable.
When I copy and paste the original image as a new object, it's also automatically converted to the quadtone of the layer beneath it.
How do we set a toggle shortkey for switching between background and foreground colour in Corel Photo-Paint x6?
View 3 Replies View RelatedTill X3 Photo-Paint opened and saved transparent PNGs as a seperate image with attached mask.Example:I have an image and load a B/W mask into it.
When I save this as PNG and reload it in X3, Photo-Paint displays again exactly what I have just saved:
However when I open this same PNG in X6, the image and mask get merged into a single object:
It's in effect doing automatically a "create object from selection" function and discards then the background.Why? I can't work with the full background image anymore, because the transparent parts are missing, and the mask is also gone. Is there no way to open the full PNG, without any merging and deleting of masks, just the way X3 was doing it?Also, the only way to save a transparent PNG in X6 is to check "save only selected objects"? When I don't check this, but still check "transparency" in the PNG export dialogue, then the mask won't be saved nonetheless.
Trying to edit and save this file fails silently, because Photo-PAINT does get confused by a file name like this: "filename.morename.extension". Nothing gets saved.
The actual file name taken from my example file is: "Flag_of_Germany.svg.png".
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I want to know how to resize a photo without loosing quality....... in the image resize box the is a check box that says maintain file size ......what does that do .
I have tried to resize using it and the file stays the same as the original.
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedI want to create bulging eyes in a photo that i have. I would do this in photo paint?
View 10 Replies View RelatedIn a photo, I cut out an elliptical or round face.I saved the cutt image as .; "New from clipboard" No problem, the background is now transparent.
But now I want to make the edges of the oval or round image transparent.(then I want to put the result image on another image)
How can I make the edges transparent with Corel Photo Paint (or Corel Draw)?
Is there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
The current crop of photo sharing apps like Instagram have made filter effects a popular way of adding some extra vim to your shots. What if you want to give the ‘retro’ look to photos that aren’t on your phone though?
How can we create retro looking photos in PhotoPaint?