Using pro x4, when he imports a AVCHD clip and plays it back, the audio is distorted. The same clips audio is fine playing directly from the desktop, using windows media player. It also plays back fine in another video editing program.
(O.S Windows 7 Ultimate 64bit).
when i have on my timeline more than 1 audio track playing at the same time, the result is the audio sounds choppy and distorted. but when i playback just one audio clip it is fine.
View 4 Replies View RelatedI have a video clip (.MOV) which I have added to my project.
When I preview the clip itself the sound is perfect. However when I preview he actual project, the sound is distorted.?
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
View 13 Replies View RelatedI've uploaded MPEGs from Panasonic DMC-TZ7 on HD quality. Audio works fine when playing clips and when played on Quicktime. When playing back on Project, I get a chopped pulsing noise on some parts (although they play OK as clips). I used simple fade to black transitions and trimmed clips. When I finish project, the sound was OK on the first clip but I get no sound or the odd pulse of sound on subsequent clips.
I have re-installed VS pro X3 and downloaded the latest patches but it makes no difference.
I recently transferred collection of Super8 movies from a VHS tape and burned to a DVD. Upon playback on the computer, as well as preview prior to burning, the audio on the clips worked fine. However when the disc was played on the DVD player ( tried my blu-ray player as well), there was only audio in sections where I had added an audio track. Did I miss something ?
View 4 Replies View RelatedI am not new to this software and have made many videos. The problem is that I got a new computer with Windows 8 and installed X4 VideoStudio. I can hear the sound file when I select the clip but as soon as I select Project, there is no sound. I am currently uninstalling the program and trying to reinstall.
View 2 Replies View RelatedWhen I play the video "clip" mode, it is perfect. When I play the "project" mode, the sound cuts in and out. But not on all clips, just the .mov files. The .wav are fine. I just updated all the patches, (to my knowledge) and tried to make a new project.
I just figured out the the corel does not like .mov files. I converted to .wmw and it works.
I have used VideoStudio 11 happily for some time now but when I recently captured a HDV video in the DV format I found that the audio in some of the sequences plays back normally BUT some does not play back at all or only at a very very low level. The audio on the original tape is fine and I can see the audio waveform on the sequences that don't play back.
View 1 Replies View RelatedI just finished editing MP4 videos with Corel VideoStudio x3. I exported the videos in the same format. The problem i am having with all of the videos is that when I try to view them with Adobe Flash Player All I get is the audio portion of the video and the Adobe controller is visible. I have tried to exporting the videos in a few different MP4 formats but none seem to work?
View 5 Replies View RelatedWe've got some Sony XDCam footage coming into Premiere in a .MXF container. Playing back the audio yields a very 'crunchy' distorted sound. 'S' sounds sound lispy and there is generally a lot of additional noise.Opening these files in Sony Vegas doesn't have any audio problems at all, everything sounds fine which leads me to beleive that Premiere is the problem.
However, I've tried exporting audio from Sony Vegas to re-sync with the clips in Premiere, but the audio STILL sounds distorted and crunchy.Opening the audio in Audition ends up being a little better, but still not as clean as how the original audio sounds in Sony Vegas.
Here are all the details I've got for ya:
- Audio recorded in 3 channels, 2 stereo channels from the on board mic and 1 channel through a boom mic (The Sony cams handle up to 8 channels)
- Footage was ingested through Prelude and renamed when copied. (The actual files were not renamed, only the metadata that Prelude tags onto the clips)
- We are working on PC machines (Windows 8) as well as Mac (OS Mavericks) and ALL machines are having the same problem.- We experience the same problem regardless of whether the files are stored on our network NAS or locally
- We are all on the latest version of Premiere CC 7.2.1 (4)
I suspect that it has to do something with how Premiere is decoding the audio from the .MXF clips. Sony apparently decodes it just fine, which makes sense since the Cameras are Sony cams to begin with.I am now noticing that ALL audio in Premiere is experiencing this same effect! Regardless of container/codec.
When exporting a sequence I'm having problems with my audio being distorted, like it was peaking. Audio in the timeline sounds good, I did have some gain adjustments on some clips which I removed to see if that was the issue and the same problem is happening. No other effects other than some reverb are present.
Faders were normalised and audio peaked at -1dB only for a few seconds, the normal audio levels are about what is shown in the screenshot, around -6 to -5 dB.
This was exporting via the iPod preset with not further adjustments.
MacBook Pro Retina 15" - OS X 10.8.4 - 4TB G-tech G-Raid - Smoke 2013
MacPro 5,1 - OSX 10.8.5 - 64GB Ram - 12TB Pegasus RAID - 24 inch HP DreamColor - Smoke 2013 - Maya 2013
Using Premiere cs6.Audio keeps dropping out during playback. Audio is present in the export.The audio drops out at random and drops back in at random.
I have tried everything from converting my wav to an mp3/aiff, moving my cache and preview files (and changing my scratch locations) to my computer from my external hard drive, creating a new project, deleting the pek files, even closing all apps.
This is something that just started happening out of nowhere in the middle of a project and has gotten worse and worse with use.
How to get audio playback in CFX and Action?
I have the Main Audio loaded the Timebar but can hear anything when I press play.
I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
Unable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
I have encountered this problem on all recent Premiere projects I've worked on with a variety of audio types. My audio is cutting in and out in a seemlingly random way while the video keeps running fine. Sometimes the audio will play fine for 15 seconds then stop, sometimes it stops and starts after about 2 seconds. I have tried adjusting all of my preferences, settings, audio types, and even video types but the problem always comes back. Spoke to a friend who's new to Premiere and he's having the same problem. Considering moving back to FCP despite the weak interface.
Currently I am editing Canon 5d Mkii footage at 1080p, 29.97 fps. I am using none of the audio attached to the video clips - only editing to a separate m4a music track. My audio is at 44100 Hz. I am playing back video at 1/4 quality. I am running a fully updated Mac Powerbook with a 2.6GHz Intel Core i5 and 8gb of RAM.
I have installed After Effects CS6 in a Mac running 10.6.8(Snow Leopard) with 4 GB ram and have installed all the updates of After Effects. Whenever I try to get the audio output, i get an error: " After Effects Warning: Unable to start audio playback. confirm your audio hardware is properly configured or change the driver selection in Preferences: Audio Hardware "
I tried to reinstall the software and also I tried the Audio MIDI Setup configuration but it too is of no use.
I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
This is incredibly frustrating have to export out a video just to be able to watch it through.
Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.
View 9 Replies View RelatedWhile editing a large video file (one hour), the audio playback worked for a while, but then simply stopped working. Can still see video and edit it, but without hearing the words / background, editing will not be correct. Is there a bug in the software or some way of reseting the file? I have noticed a similar issue with videos in LR4.
View 2 Replies View RelatedI have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I have just spent several days putting a project together. Mainly still images with some digital video.
When I rendered the project (pal 16_9 frame based also tried lower first) the result is far from acceptable. It looks like a low res picture although I rendered with high quality settings (the same ones I have used many times before) Straight lines seem to have a slight saw tooth effect. If I utilize an overlay the problem is suddenly much more pronounced. Wether this is caused by the overlay itself or the fact that the images are enlarged slightly I don't know.
The video clips from my digital video camera seem to be ok, the problem being mainly with the still images.
By the way the same images created as a slide show in movie factory are perfect.
I have a fast computer with vista installed and had excellent results earlier in the year with another sinilar project.
I have a 16:9 video and when I select "save as still image", the resultant image is squeezed into 4:3 and doesnt look good. I cant see anything in preferences that allows me to adjust this. Can I tweak "save as still image" so it keeps the correct aspect ratio?
View 2 Replies View RelatedI am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
I'm using pro x4, had no problems til today
I'm using win7, and just from today, x4 has stopped giving any sound output. Playing mpg files I can see the sound levels in the mixer, but there's no output audio. I can hear mpg audio in other players, just not in Corel.
I am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
When editing DV from my old mini dv camcorder, how can I get the final edit to fill the screen without the black side bars after puting on to a dvd and playing back on a 1080x1920 tv. does VS pro x4 have a setting to eliminate the black bars?
View 4 Replies View RelatedI have been experiencing an error message from Windows Media Player when attempting to skip ahead (fast forward) with MPEG-4 HD files that I am creating with VideoStudio Pro X5. After the new MP4 HD file is first created (this can take anywhere from 30 minutes to 3 hours depending on the length of the clip, which are between 15 and 40 minutes), I open the file to view it in Windows Media Player. It starts playing normally with no problems, but as soon as I click to skip ahead on the timeline bar, an error message displays stating "Windows Media Player encountered a problem while playing the file". In the last 10 attempts or so I have only been succesful in creating one MP4 HD file that allows skipping ahead... I am not doing anything differently (that I am aware of, at least) when I "get lucky" and manage to create a file that does not generate the error message, and after burning the last 9 hours on three more failed attempts I decided to check
View 4 Replies View RelatedI recently purchased Pro x6. While I love the new features, something has been happening today that is frustrating. I captured some video from my Canon HG10 and placed it on the timeline. When I try to play it in the editor, a green screen appears over the video. I can hear the audio but cannot see it.
View 1 Replies View Related