VideoStudio :: Playback Error With MP4 HD Files
Jan 10, 2013
I have been experiencing an error message from Windows Media Player when attempting to skip ahead (fast forward) with MPEG-4 HD files that I am creating with VideoStudio Pro X5. After the new MP4 HD file is first created (this can take anywhere from 30 minutes to 3 hours depending on the length of the clip, which are between 15 and 40 minutes), I open the file to view it in Windows Media Player. It starts playing normally with no problems, but as soon as I click to skip ahead on the timeline bar, an error message displays stating "Windows Media Player encountered a problem while playing the file". In the last 10 attempts or so I have only been succesful in creating one MP4 HD file that allows skipping ahead... I am not doing anything differently (that I am aware of, at least) when I "get lucky" and manage to create a file that does not generate the error message, and after burning the last 9 hours on three more failed attempts I decided to check
View 4 Replies
ADVERTISEMENT
Jan 15, 2013
I am having trouble with stuttering video/audio while playing WMV files in VS Pro X5 SP1. Any clip which I try to view will stutter on playback (sounds like a scratched/dirty CD). These files play fine in Media Player Classic. Other file formats (e.g. mp4) play fine in VS, it is just WMV files that are doing this. I don't get any errors, it just doesn't playback correctly.
The WMV files were created within this installation of VS Pro X5 SP1. The original source varies. I've started with .MTS files from my Canon camcorder SD card (reader built into PC), or from mp4 files which I also created from this installation of VS. When I share the files, I get no errors. I've had it happpen with 3 minute files, and with 11 second files.
One example file that does this is:
file size 3,405 KB
Duration 11.064 seconds
Data rate 2481 kdps
Video: Windows Media Video 9
24 bits, 1280x720, 29.970 frames/sec
Audio: Windows Media Audio 9.2
44.100 KHz, 16 bits, Stereo
Aspect ratio 1.78:1.0
Is editable: yes
Project settings are:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 44.100 kHz, 16 Bit, Stereo
I've also tried changing the Project settings to this, but the WMV file still comes out as 44.1 and the same issue occurs:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 48.000 kHz, 16 Bit, Stereo
Not sure if this is related or not, but when I installed the latest version of VS Pro X5, I started having trouble with windows media player. At the moment, WMP won't play DVD's or WMV files because it says it doesn't have the codec. I'm running WPM 11 on Win XP and it is the most current version.
View 2 Replies
View Related
Oct 17, 2012
When trying to Edit/Playback imported .MP4 files it keeps jumping, it's fine when I use .MOD files
View 2 Replies
View Related
Feb 4, 2011
I just want to warn that the SP2 patch of VS Pro X3 is incompatible with rendering and playback of mpeg-2 files. Your mpeg-2 files will finish rendering with SP2, but the rendered file will have audio distortions. Corel has a patch to repair it (only send to someone who calls Corel & complain about mpeg-2 render problems), but the patch causes a hiccup in the preview playback of the mpeg-2 clip just after the rendering is finished. The result only plays smooth after pause and starting of the playback from beginning again.
View 14 Replies
View Related
Jan 22, 2012
I am using Corel VideoStudio ProX4 to build a small movie and am having a problem with AVI files. When I go to Step 2 Edit, and click on the folder icon to "Import Media Files" I can see a set of mp4 and avi files I would like to use in my project.
The mp4 files open fine and play just fine. The avi files were opening fine last night, but would play in a jerky manner when an audio track was laid over them. I blew away that project and today tried to go to Step 2 Edit, Import Media files, and tried to import the avi files again now I get this message:
File format mismatch
1081:1:3
It will no longer let me import, play, edit the avi files. These files play fine in Windows Media Player so I'm not sure what is going on. I just installed Service Pack 2 yesterday, and I'm thinking this may be causing the problem.
View 2 Replies
View Related
Dec 11, 2013
Just purchased VideoStudio X6 Ultimate and I am having some issues importing files either into a time-line or into a library. I have put the different days into different directories to aid me putting a DVD together. The files are mixed AVI and JPG files and some directories will import and others will not, the files were all collected within days of one another on a holiday using the same camera. I am importing using the capture tab then import from digital media button, this correctly gives me the select directory box but when I try and import certain folders I get a Microsoft Visual C++ Runtime Library error and a request to close the program.
The error states that "this program has requested the Runtime to terminate in an unusual way". I have tried moving the files to other directories, split them up and even tried to import one JPG from an affected directory with the same result.
I am running Win 8, with 8Gb of memory and 1.6 Tb of free hard drive space.
View 14 Replies
View Related
Mar 15, 2013
I am getting “Error: 4 – Corel VideoStudio files have been damaged or modified. Please reinstall your original source.” with VS Pro X6 trial download. Install runs normally. But when I try to run the software, I get the above error immediately.
Things I have tried:
- Uninstalled from control panel, followed by cleanup tool (VSX4_Cleanup. Is there a more recent version for X5 or X6 ?)
- Deleted the Setup Files folder “Corel VideoStudio Pro X6 Setup Files”, and cleared TEMP files. Rebooted
- Downloaded installer again and repeated install. Rebooted. Tried to run. Same Error
- Confirmed “Protexis Licensing V2” service is running
- No prior version of the software was ever installed on this system
- Running Win 7 Pro x64 SP1. Thinkpad T420 with integrated graphics.
View 1 Replies
View Related
Mar 26, 2012
I have the error, that the animation preview can't start my media player...
I allways get two errors: One from windows (the german one) and one from max...
My default media player is "media player classic home cinema". If i click on a AVI file in explorer, mpchc will launch and play it. So the file associate are ok. But max can't start it.
This is not related to max 2012... I have this error since many versions of max...
[URL]
View 2 Replies
View Related
Sep 20, 2013
LR5.0/5.2 64-bit Win 7--
I am occasionally getting an error message when trying to view .MOV files from a Nikon D600: Video System Error: unknown Message: BindSuccess. Once that error pops up, I cannpt view any movies until I restart Lightroom. However, I do not have any problems viewing any of the files with Windows Media Player. What is causing this? I have an AMD Radeon 6700 HD series video card and a lot of RAM.
View 2 Replies
View Related
Dec 23, 2009
Having an issue with an unspecified error (5.0.0) when burning DVD to file.
I've created the project as a single Mpeg-2 file as suggested...then added chapters and a DVD menu etc. When i burn it gets to 99% then as it's finishing... Boom... Unspecified Error.
24 Bit 720x 576 , 25fps
DVD-PAL 4:3
Variable 4000kbps
Audio 224kbps
Theres an audio file and couple of JPEGS on the menus if that makes and difference?
View 9 Replies
View Related
Nov 2, 2010
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
View 13 Replies
View Related
May 24, 2011
I've uploaded MPEGs from Panasonic DMC-TZ7 on HD quality. Audio works fine when playing clips and when played on Quicktime. When playing back on Project, I get a chopped pulsing noise on some parts (although they play OK as clips). I used simple fade to black transitions and trimmed clips. When I finish project, the sound was OK on the first clip but I get no sound or the odd pulse of sound on subsequent clips.
I have re-installed VS pro X3 and downloaded the latest patches but it makes no difference.
View 1 Replies
View Related
Apr 29, 2012
I'm using pro x4, had no problems til today
I'm using win7, and just from today, x4 has stopped giving any sound output. Playing mpg files I can see the sound levels in the mixer, but there's no output audio. I can hear mpg audio in other players, just not in Corel.
View 2 Replies
View Related
Nov 17, 2011
I recently transferred collection of Super8 movies from a VHS tape and burned to a DVD. Upon playback on the computer, as well as preview prior to burning, the audio on the clips worked fine. However when the disc was played on the DVD player ( tried my blu-ray player as well), there was only audio in sections where I had added an audio track. Did I miss something ?
View 4 Replies
View Related
Aug 5, 2012
After I've upgraded to OSX 10.8 Mountain Lion, I begin to see the following issue while trying to import .mts files from my Panasonic GH2 SD cards:
1. LR no longer sees individual files on the SD card. I know that this is because ML has decided to treat all AVCHD-related directories as packages and LR can no longer see the indivisual .mts files from the file system. However, Premier Pro CS6 CAN.
2. Even after copying the .mts files to an unrelated directory, LR is no longer able to import the files. I get the "There is a problem with the video file"
3. The .mts files I previously imported into LR 4.1 with Lion no longer plays inside LR. I see the thumbnail but if I attempt playback I get the "there was an error working with the video" error.
There obviously major compatibility issue with LR 4 and ML in relation to video files. I relies on LR for all my video file cataloging needs - now I am unable to do so. All of this was working just fine with Lion.
View 1 Replies
View Related
Feb 2, 2011
I'm having a hard time creating MP4 HD files. It's always gone well, but recently it seems that I get to around 99% rendering, and then it crashes. I get the message "The program has encountered an unspecified error and has stopped functioning"
I'm running an older dual core intel T2080 CPU with Vista, nothing fancy. It seems to happen with videos that are around an hour and a half. If I keep my videos to around an hour it will complete the rendering process. I am able to see the final 8GB file that was created, but it won't play as the rendering wasn't 100% finished with the longer video. This whole thing happens on different PC's so it's not my program installation.
View 5 Replies
View Related
Oct 6, 2010
I am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
View 4 Replies
View Related
Feb 23, 2013
When editing DV from my old mini dv camcorder, how can I get the final edit to fill the screen without the black side bars after puting on to a dvd and playing back on a 1080x1920 tv. does VS pro x4 have a setting to eliminate the black bars?
View 4 Replies
View Related
Dec 1, 2012
I am not new to this software and have made many videos. The problem is that I got a new computer with Windows 8 and installed X4 VideoStudio. I can hear the sound file when I select the clip but as soon as I select Project, there is no sound. I am currently uninstalling the program and trying to reinstall.
View 2 Replies
View Related
Mar 17, 2013
I recently purchased Pro x6. While I love the new features, something has been happening today that is frustrating. I captured some video from my Canon HG10 and placed it on the timeline. When I try to play it in the editor, a green screen appears over the video. I can hear the audio but cannot see it.
View 1 Replies
View Related
Feb 13, 2013
Am using VS5. Have been able to burn HD blurays. how to make an HD dvd for big-screen tv playback.
View 5 Replies
View Related
Nov 10, 2012
I recently burned video footage to DVD with VS Pro X5 (with the parameters already set in the VS Pro Burning module), and played the DVD on my DVD player...the DVD played pretty well on my player, though some "striations" or moire appeared in the background on some building sidings early on--but it didn't distort the overall play-ability of a particular sequence...
However, when I played the DVD on a friend's DVD player, the beginning of the DVD broke up and "de-pixillated," for want of a better word--though 2/3rds of the DVD's later footage played OK (and a commercial DVD played just fine on my friend's DVD player just before all this)...
That result left me very puzzled, why it should play more-or-less OK on my own DVD player, but so horrendously on another DVD player...
Is there some VS Pro (or a utility program) filter that I can run the footage through prior to/during a DVD Burn in VS Pro to get a smooth rendering of the footage?
View 4 Replies
View Related
Jul 2, 2011
I started to work now with HD clips captured from my new HD camcorder. At the EDIT step, the play back of the entire project is not smooth, there is no continuity of the video and the audio. After the SHARE/CREATE VIDEO FILE step, the play back runs good.
View 4 Replies
View Related
Dec 13, 2012
Not had this before, just put a couple of minutes clip into the timeline ready to edit and when I play through it, the video is jerky/jittery on playback. If I click on it in the library and play it without pulling it in to the timeline, it is fine, and if I click on the video without opening the programme, it also plays fine ? If you watch the timeline scrubber as the video jerks, you can see a trail of little white shadows that the scubber leaves behind as it stutters ? I have tried with other clips and it does exactly the same ! The clip is AVCHD clip, and.... I have let it create a smart proxy file before playing it.
View 13 Replies
View Related
Jan 5, 2013
I have a new camera which records in AVCHD format. I have transferred the video files from my camera to the computer. I have compiled a project on Video Studio ProX2. When I playback each clip they play at normal speed. When I playback the project before copying onto a disc the playback is very fast. I have also got as far as sharing the project onto a disc but when I click on preview the playback is again very fast. I see that I can slow down the playback but this also slows down any speech on the video.
I have used Video studio PRox for a couple of years now with great success with an old Sony Handycam but I must need to do something to the new format to play it back at normal speed.
View 9 Replies
View Related
Jan 1, 2012
I am using a Firewire and have a Sony Handycam. I find that although VSX4 captures okay - that when I stop the capture and go through to 'Edit", the project playback or clip playback won't play, and yet if I use the 'scrubber' with my mouse, it plays the entire captured part.
This is a little hard to explain: what happens is during 'video capture' - VSX4 begins to capture and then the preview screen freezes. The capturing however continues, even though the preview screen has frozen. After a couple of minutes I stop the capture and go through to 'edit' but I find when I press the button to play back (either as a 'project' or 'clip') it actually stops at the part where the preview screen had frozen whilst capturing. However, if I use my mouse on the 'scrubber' line, I can view the entire capture (e.g. the part after the preview screen froze).
View 14 Replies
View Related
Mar 23, 2011
Using Corel VideoStudio Pro X3 and either Corel DVD Moviefactory 7SE or Corel DVDFactory Pro 2010, the playback quality of the burned disks is poor. While the completed project has excellent quality both direct from the hard drive AND when using Windows Explorer and just copying directly to the DVD, anytime I attempt to create a simple menu structure, it seems that the entire video is re-rendered causing a significant loss in video quality from the original. I have tried all settings in both packages even just including the created 660MB mpeg4 (rather than the project itself) in Pro 2010 and the result is a 220MB file. Again, when I just use Windows Explorer and copy directly the DVD, the original video is preserved including the 660MB file size and the quality is the same as the project.
View 9 Replies
View Related
Dec 11, 2012
Using pro x4, when he imports a AVCHD clip and plays it back, the audio is distorted. The same clips audio is fine playing directly from the desktop, using windows media player. It also plays back fine in another video editing program.
(O.S Windows 7 Ultimate 64bit).
View 14 Replies
View Related
Jan 2, 2012
I shot some video's with my HD-camcorder (Samsung HMX-H200) this New Year's Eve, and now I want to put them all together and make a nice video. My problem is that when I try to preview/edit the 1080p HD video's the preview screen just goes black, and there is no sound either. But when I put the entire unedited clip into my project it WILL play, but then I cant really edit anything. I also used another camera that shoots in 720p, and those video's play and can be edited perfectly The version that I am currently using is 14.0.0.342, and it says that there are no new updates.
View 6 Replies
View Related
Jul 5, 2011
I have been using Ulead Video Studio 6 for years creating slide shows and burning them to DVD. While playing DVD, made in Ulead Video, the slide show would display in full screen on any TV (for example a horizontal picture would be displayed in full screen and vertical picture would be displayed from top to bottom exposing some black background on the sides which is OK). Now I am using Video Studio Pro X3 and after I create a DVD there is a black background around each photo during playback. In other words, each photo seems to be slightly reduced in size or there is a black border around it during playback of DVD.
View 7 Replies
View Related
Feb 5, 2012
Since quite some time I have been succesfully uploading FullHD (AVCHD 1920x1080 50i) movies on YT. Some weeks ago I got a strange playback problem with my last uploads: video's are played in (very smooth!) slow motion mode at some resolution settings. The same Divx video's on the contrary always playback OK In order to illustrate the YT playback speed problems I uploaded two times the same 10sec video. The first video has been rendered as a fullHD AVCHD video in VSX4 (never got problems in the past with similar video’s), the second is a fullHD DviX version of that same video (from another converter). The lower resolution settings in the AVCHD video slow down while the 720 and 1080 settings run OK [URL]
View 2 Replies
View Related
