I started to work now with HD clips captured from my new HD camcorder. At the EDIT step, the play back of the entire project is not smooth, there is no continuity of the video and the audio. After the SHARE/CREATE VIDEO FILE step, the play back runs good.
View 4 Replies
I am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
I am not new to this software and have made many videos. The problem is that I got a new computer with Windows 8 and installed X4 VideoStudio. I can hear the sound file when I select the clip but as soon as I select Project, there is no sound. I am currently uninstalling the program and trying to reinstall.
View 2 Replies View RelatedVideo and overlay track are lagging during project playback Does not lag when clip playback. I need to preview all the tracks to make corrections. Also note that when fully rendered it does not lag. Even when playing single track lag is noticable. audio, vocal, and title tracks are fine when playing back. Its just Video and overlay track that are lagging
View 1 Replies View RelatedI'm using Videostudio x4, a recent installation on a 2 week old 'Dell Inspiron one 2320'. The computer is an 'All in One' and runs great generally.
Members, I seem to remember when I was running what was back then the Ulead version years ago, and, that it was better to have a second hard drive as a scratch disk for the realtime, or Timeline project playback, the reason I ask, I still suffer some jerky-ness when picking 'Project' in the edit playback window, I do not suffer problems when rendering the project as a final video format.
The Dell spec is the highest I could get, a i7 intel 3.8 processor, 8gig ram, 2tb HD, 1gig Nvidia Gforce GC, Intel HD sound card, with a monitor of 1920x1080 Full HD, the USB is 2.0 (3.0).
If the idea is a sound one, what changes do i make and where in the settings do I make them, also would using a 16 gig Patriot flash dongle be any good, or should I get a bigger HD for the job, either 30 to 60 gig SSD or bigger 7200rpm HD type.
If I playback in fragment mode, the speed is ok. But if I playback in project mode the speed is a little slowing down.
How is this possible ?
I have created a project and have gotton far into it. All of a sudden on playback it stops in the same spot. I tried deleting the frame ans reinserting the picture but nothing seems to work? On previous playbacks along the project creation it didn't stop. Is this a bug?
View 2 Replies View RelatedI have imported 5 clips into Videostudio Pro X4, all taken concurrently with the same camera/settings etc. If I play back a single clip, the quality is as I would expect it to be. If I switch to playing back project rather than clip, there is a noticeable drop in quality.
View 3 Replies View RelatedI don't know why Corel made this program without the ability to change the playback speed in project view. You can only change the speed on each clip. When you have 50 or more clips, this can take all day, when it could take a few seconds if you can do it in project mode.
View 10 Replies View RelatedI am editing a video and the footage is an HD .mov (30 fps, 24bit 1920x1080 48s in length) file recorded directly from a logitech webcam. The clip plays fine in the Library, but when I add it to the storyboard/timeline the video plays super fast, then goes blank for the duration of the clip.
View 2 Replies View RelatedI was trying to rotate the entire model to align with the grid of another building. I need to do that in order to export to Navisworks easily without any adjustment.
After I select the entire model in 3d view, and going back to the plan view, the rotate tool is ghosted. What's the reason of it? See attached file.
For example I have some complicated animation in 500 - 300 px size.Are there ways to enlarge the entire animation up to 1000 - 600 px or some another size?Using presets for responsive layout leads to unexpected results, may be it solves only simple cases when objects have similar characteristics and so.I had made a complex animation and then found out the size might be 2 times bigger - doet it mean I'd start from the beginning?
View 3 Replies View RelatedI'm using the trial version of After Effects. Sometimes the rendering que will render an entire project, other times it will only render a single frame of the project. Is there a reason why the rendering process is performing in such a way?
View 2 Replies View RelatedI'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
URL....I need to copy one entire project and then rename them all, it has about 1500 parts/assys that I need to rename.
Instead of renaming all items of my project, one by one using Design Assistant, could I just make some kind of rule that renames all the parts/assy's in my project, and then update its PART NUMBER too ?
because my register code is something like this : TAG-0000-0000-00, and the only thing that's gonna change its the string TAG, nothing else. I could try to change only the first 6 that are the TAG, but this sequence of rename/open/update, how to make, and even if that's possible. Or maybe have any other specific tool to rename things this way instead of Design Assistant ?
Recently I renamed a folder that contained a Maya project. Here's a simple file structure to show what I mean:
I renamed this:
OLDname > mayaProject > scenes > Project01.ma
…to this:
NEWname > mayaProject > scenes > Project01.ma
The mayaProject (and all it's subfolders: scenes, assets, etc.) was created in Maya, and the OLDname folder was where I kept it and the other files related to the project.
After renaming that folder, when I double clicked the Project01.ma file to launch Maya, I received this error:
// Error: Wrong number of arguments on call to pv_performAction
When I relaunched Maya by its icon and used the File > Open Scene… option, I received this error:
// Error: Wrong number of arguments on call to performFileAction does not match number of parameters in procedure definition.
In both cases, Maya opened a blank Untitled file, instead of my Project01.ma file. When I changed the name of that folder back to OLDname, the Project01.ma file opened properly.
My question is, how can I rename or move this folder and still preserve the file hierarchy that Maya needs to open the Project01.ma file?
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
View 13 Replies View RelatedI've uploaded MPEGs from Panasonic DMC-TZ7 on HD quality. Audio works fine when playing clips and when played on Quicktime. When playing back on Project, I get a chopped pulsing noise on some parts (although they play OK as clips). I used simple fade to black transitions and trimmed clips. When I finish project, the sound was OK on the first clip but I get no sound or the odd pulse of sound on subsequent clips.
I have re-installed VS pro X3 and downloaded the latest patches but it makes no difference.
I'm using pro x4, had no problems til today
I'm using win7, and just from today, x4 has stopped giving any sound output. Playing mpg files I can see the sound levels in the mixer, but there's no output audio. I can hear mpg audio in other players, just not in Corel.
I recently transferred collection of Super8 movies from a VHS tape and burned to a DVD. Upon playback on the computer, as well as preview prior to burning, the audio on the clips worked fine. However when the disc was played on the DVD player ( tried my blu-ray player as well), there was only audio in sections where I had added an audio track. Did I miss something ?
View 4 Replies View RelatedWhen editing DV from my old mini dv camcorder, how can I get the final edit to fill the screen without the black side bars after puting on to a dvd and playing back on a 1080x1920 tv. does VS pro x4 have a setting to eliminate the black bars?
View 4 Replies View RelatedI have been experiencing an error message from Windows Media Player when attempting to skip ahead (fast forward) with MPEG-4 HD files that I am creating with VideoStudio Pro X5. After the new MP4 HD file is first created (this can take anywhere from 30 minutes to 3 hours depending on the length of the clip, which are between 15 and 40 minutes), I open the file to view it in Windows Media Player. It starts playing normally with no problems, but as soon as I click to skip ahead on the timeline bar, an error message displays stating "Windows Media Player encountered a problem while playing the file". In the last 10 attempts or so I have only been succesful in creating one MP4 HD file that allows skipping ahead... I am not doing anything differently (that I am aware of, at least) when I "get lucky" and manage to create a file that does not generate the error message, and after burning the last 9 hours on three more failed attempts I decided to check
View 4 Replies View RelatedI recently purchased Pro x6. While I love the new features, something has been happening today that is frustrating. I captured some video from my Canon HG10 and placed it on the timeline. When I try to play it in the editor, a green screen appears over the video. I can hear the audio but cannot see it.
View 1 Replies View RelatedAm using VS5. Have been able to burn HD blurays. how to make an HD dvd for big-screen tv playback.
View 5 Replies View RelatedI recently burned video footage to DVD with VS Pro X5 (with the parameters already set in the VS Pro Burning module), and played the DVD on my DVD player...the DVD played pretty well on my player, though some "striations" or moire appeared in the background on some building sidings early on--but it didn't distort the overall play-ability of a particular sequence...
However, when I played the DVD on a friend's DVD player, the beginning of the DVD broke up and "de-pixillated," for want of a better word--though 2/3rds of the DVD's later footage played OK (and a commercial DVD played just fine on my friend's DVD player just before all this)...
That result left me very puzzled, why it should play more-or-less OK on my own DVD player, but so horrendously on another DVD player...
Is there some VS Pro (or a utility program) filter that I can run the footage through prior to/during a DVD Burn in VS Pro to get a smooth rendering of the footage?
Not had this before, just put a couple of minutes clip into the timeline ready to edit and when I play through it, the video is jerky/jittery on playback. If I click on it in the library and play it without pulling it in to the timeline, it is fine, and if I click on the video without opening the programme, it also plays fine ? If you watch the timeline scrubber as the video jerks, you can see a trail of little white shadows that the scubber leaves behind as it stutters ? I have tried with other clips and it does exactly the same ! The clip is AVCHD clip, and.... I have let it create a smart proxy file before playing it.
View 13 Replies View RelatedI have a new camera which records in AVCHD format. I have transferred the video files from my camera to the computer. I have compiled a project on Video Studio ProX2. When I playback each clip they play at normal speed. When I playback the project before copying onto a disc the playback is very fast. I have also got as far as sharing the project onto a disc but when I click on preview the playback is again very fast. I see that I can slow down the playback but this also slows down any speech on the video.
I have used Video studio PRox for a couple of years now with great success with an old Sony Handycam but I must need to do something to the new format to play it back at normal speed.
I am using a Firewire and have a Sony Handycam. I find that although VSX4 captures okay - that when I stop the capture and go through to 'Edit", the project playback or clip playback won't play, and yet if I use the 'scrubber' with my mouse, it plays the entire captured part.
This is a little hard to explain: what happens is during 'video capture' - VSX4 begins to capture and then the preview screen freezes. The capturing however continues, even though the preview screen has frozen. After a couple of minutes I stop the capture and go through to 'edit' but I find when I press the button to play back (either as a 'project' or 'clip') it actually stops at the part where the preview screen had frozen whilst capturing. However, if I use my mouse on the 'scrubber' line, I can view the entire capture (e.g. the part after the preview screen froze).
Using Corel VideoStudio Pro X3 and either Corel DVD Moviefactory 7SE or Corel DVDFactory Pro 2010, the playback quality of the burned disks is poor. While the completed project has excellent quality both direct from the hard drive AND when using Windows Explorer and just copying directly to the DVD, anytime I attempt to create a simple menu structure, it seems that the entire video is re-rendered causing a significant loss in video quality from the original. I have tried all settings in both packages even just including the created 660MB mpeg4 (rather than the project itself) in Pro 2010 and the result is a 220MB file. Again, when I just use Windows Explorer and copy directly the DVD, the original video is preserved including the 660MB file size and the quality is the same as the project.
View 9 Replies View RelatedUsing pro x4, when he imports a AVCHD clip and plays it back, the audio is distorted. The same clips audio is fine playing directly from the desktop, using windows media player. It also plays back fine in another video editing program.
(O.S Windows 7 Ultimate 64bit).
