I'm using the trial version of After Effects. Sometimes the rendering que will render an entire project, other times it will only render a single frame of the project. Is there a reason why the rendering process is performing in such a way?
View 2 Replies
i have a certain tv-promo-project where i have to render several comps which all include the same amount of text and just a hand full of additional graphic elements, e.g. a lensflare and a glowing line which separats the text blocks.
The text of the specific promo-comps are read out of a "main text comp" by expressions. The expression is as follows:
txt = comp("Master Textkomposition").layer("Textebene").text.sourceText;
txt.split("
")[0]
The rendertimes of the project are constantly slowing down as the render queue and the process goes on. The first comp takes about 8 Minutes to render (it is only 10 sec long) and the second already 20 min, where the third comp reaches like 2 hours of render time. I also recognized that even the preview in the timeline is really slow, although the used effects are usually not that performance heavy.
I bought this AE file URL...Here is the error message I get when trying to render...After Effects error: Unable to allocate enough memory to render the current frame (18172 x 18172 @ 8 bpc). Either decrease the memory requirements for the rendering of this frame, or install more RAM. (12805). For more information, see adobe.com/learn_ae_mem (7 :: 66)
I even tried to render the project without making any changes. No luck
Is my laptop inadequate for this type of work?When it says - (18172 x 18172 @ 8 bpc) is that the resolution it's trying to output? The project is 6 seconds long and 1920x1080 resolution. I can render it at half resolution, but not at the 1080 res.
Yesterday Ae was working perfectly. Today, Ae will not render compositions in the render queue or in AME? If I try to render from Ae,I get this error message:
and I can fin nothing about this error anywhere on line.
I started to work now with HD clips captured from my new HD camcorder. At the EDIT step, the play back of the entire project is not smooth, there is no continuity of the video and the audio. After the SHARE/CREATE VIDEO FILE step, the play back runs good.
View 4 Replies View RelatedI was trying to rotate the entire model to align with the grid of another building. I need to do that in order to export to Navisworks easily without any adjustment.
After I select the entire model in 3d view, and going back to the plan view, the rotate tool is ghosted. What's the reason of it? See attached file.
For example I have some complicated animation in 500 - 300 px size.Are there ways to enlarge the entire animation up to 1000 - 600 px or some another size?Using presets for responsive layout leads to unexpected results, may be it solves only simple cases when objects have similar characteristics and so.I had made a complex animation and then found out the size might be 2 times bigger - doet it mean I'd start from the beginning?
View 3 Replies View RelatedHow do I center a piece of text generated with the 'Text' tool in the tools tab on Smac 2013 - I know how to centre it with the text pane, but how do I center the text within my entire frame ?
View 2 Replies View RelatedURL....I need to copy one entire project and then rename them all, it has about 1500 parts/assys that I need to rename.
Instead of renaming all items of my project, one by one using Design Assistant, could I just make some kind of rule that renames all the parts/assy's in my project, and then update its PART NUMBER too ?
because my register code is something like this : TAG-0000-0000-00, and the only thing that's gonna change its the string TAG, nothing else. I could try to change only the first 6 that are the TAG, but this sequence of rename/open/update, how to make, and even if that's possible. Or maybe have any other specific tool to rename things this way instead of Design Assistant ?
Recently I renamed a folder that contained a Maya project. Here's a simple file structure to show what I mean:
I renamed this:
OLDname > mayaProject > scenes > Project01.ma
…to this:
NEWname > mayaProject > scenes > Project01.ma
The mayaProject (and all it's subfolders: scenes, assets, etc.) was created in Maya, and the OLDname folder was where I kept it and the other files related to the project.
After renaming that folder, when I double clicked the Project01.ma file to launch Maya, I received this error:
// Error: Wrong number of arguments on call to pv_performAction
When I relaunched Maya by its icon and used the File > Open Scene… option, I received this error:
// Error: Wrong number of arguments on call to performFileAction does not match number of parameters in procedure definition.
In both cases, Maya opened a blank Untitled file, instead of my Project01.ma file. When I changed the name of that folder back to OLDname, the Project01.ma file opened properly.
My question is, how can I rename or move this folder and still preserve the file hierarchy that Maya needs to open the Project01.ma file?
I've got a 30 second piece of video in which a logo on a wall needs to be erased. I used the patch tool and it did a wonderful job, but only on the first frame of the clip.
View 1 Replies View RelatedI am currently working on making a lens profile and the instructions are pretty annoying as they require the calibration chart to remain in the same spot while you tilt the camera as well as move the camera around to make sure that you are tilting the camera to bring the calibration chart close to a side of the frame but not clipping it and also staying within an angle of 10-30 degrees.
This seems overcomplicated, instead, why cant adobe make a single calibration grid where the camera is positioned in such a way that it fills the entire frame as much as possible without clipping, then it simply corrects using the single chart.
With the way it is now, unless you have the camera on a computer controlled dolly and computer controlled head, you will not be able to make a completely accurate lens profile.
I need to time-stretch a whole comp. It's based on a Video blocks template, but for the purposes of this particular piece, I don't need to stretch the template itself, individual layers/clips/avi files, etc... The entire composition is moving about four times faster than it really needs to. Nothing needs to be individually adjusted; it's an "overall" issue-- I just need to stretch the 15 second time uniformly to one minute. For some reason, I'm having a lot of trouble finding out how to do this. Changing the duration/ time stretch has just created a sixty second video with fifteen seconds at the same speed and then forty-five seconds of black. There HAS to be a simple way to do this...
View 1 Replies View RelatedWhy I cannot render a frame-based video when selecting (Share/Custom/MPEG Transport-stream)? My goal is to create an AVCHD video and burn it to a DVD (4.7G). My video is 16min long and the calculated bitrate is around CBR 15,000 kbps. If I use the (Share/ADVCHD/1920) option, I don't have any control over the settings. I have already deinterlaced my video using Neoscene. That is why I want to create a frame-based video.
Below is my workflow.
Two video sources:
.mov(1080p) from ContourHD 1080p camea
.mts(1080i) from Canon Vixia HF S100
1. Trim .mts files in CSV PX3
2. Trim .mov files in Contour S/W
3. Convert trimmed clips to .avi with Cineform Neoscene
4. Edit in CSV PX3
5. Planned to render in AVCHD, 1920x1080p, 29.97 fps, 15000 kbps
I have a very long sequence on CFX (3000 frames). Its a pain everytime a have to render in proxies (30 min). Is there a way to render in the timeline on proxies and from a certain frame? The default is a render starting at frame 1.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
How to render different channels with custom framebuffer. But in order to get it working there has some node need to add into the render tree.
View 1 Replies View RelatedIf I switch from Frame Rendering to Layer Rendering I dont see any difference. Does it has advantages in certain situations to use either one?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
Is there any way to make it so that when I move into wireframe display or edged faces, only the selected object is rendered that way? I don't want everything getting in the way and confusing me with a jumble of wires.
View 1 Replies View RelatedIf I have multiple project files (.VSP) with different properties, can I batch process the individual files to their own respectful files? That is, if A.vsp is a HD edited video file, B.vsp is a SD file, C.vsp is a SD with different bit rate and screen ratio, etc, can I batch render all the files while they keep their respective properties (Same As First Video Clip)?
View 2 Replies View RelatedI'm running Revit Architecture 2012. I did a render and it looks fine in the default {3D} View. I selected to save it to the project and when I go to the renderings view to recall it, the color balance is all shifted off way way to the blue end. I tried going back over to render dialog and adjusting the white point all the way up, and it had the expected effect in the {3D} View (shifting everything to overblown orange), but nothing changed at all in the renderings View when I tried to resave it after making the adjustment.
View 3 Replies View RelatedThere seems not to be that option. I have a AE file that is 4480x192 and needs to stay this size! I have tried many converters, but they seem to diminish the quality and change the size. The program this file will be put into ONLY accepts .avi.
View 20 Replies View Relatedhow can i have a preview of the area that is going to be rendered in the model window? (this command in 3d studio is SHIFT+F, for the ones that know what i'm talking about..)
so this is the point, I have to make a bunch of images all from the same spot and with the same framing, but doesn't matter, even if I save the views, the rendered image is always different. (this mostly because
I'm using multiple computers, so it's enough that the machine has a different screen resolution or that autocad on a different machine has a different user interface, to make the render completely different.... I'd solve it using always the same computer, but it's part of the request from my new boss)...
if I set up a camera to have a proportioned view? it looks that the camera preview window is totally random.
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies View RelatedI have been working on an animation project in AE and every time I click the Add to Render Queue option it does nothing. I have tried to export it as well, to see if it would render or export and it doesn't do anything. The only thing I can do is Save Frame As. I have been working on an animation previously and was able to Add to Render Queue to render out my animation, it has only been since I added some Automated UI Scripts for pre-animated kinetic typography and for line creation that it has not allowed me to render out anything. I have checked that the scripts are in the correct Script UI folder and they are and I have tried a few other things and nothing is working, .the only thing I can think it may be is my RAM is full or there's an issue with my render settings.
View 1 Replies View RelatedI got a simple comp in after effects. Its just some text and a picture noe videos. But i do got some effects, on the text and the picture im using :
Twitch in the twitch effect manuel , i am using "Bad disortion" And im using the wiggler, in the mid of the clip.
On the text i am also using twitch. I suppose is the same , which effect it is on the text. Cause it just a effect for a really short time.
So the whole project movie its about 48 sec long. But when i render it to mov , it just renders 3 second. So i can only watch 3 seconds of my mov.
Computer specs :
Macbook pro Retina 15.
Processor : 2,3 GHz Intel Core i7
Memory : 8GB 1600Mhz DDR3
Graphics : Nvidia GeForce GT650M 1024mb
Software : OS X 10.8.3
is there any chance to render with more than two machines in CS6? Trying to install a small (non commerial) renderfarm (3 machines) I got the message that´s not possible to render with only one licence!
View 7 Replies View RelatedI'm trying to render quicktime files and recieve this - After Effects error: Rendering error while wriring to file . Unable to open file. (-1610153459)
My rig
i7 CPU 93- @ 2.800
2 x GeForce GTX 460
16 GB Ram
These are files which I've previously rendered without a hitch, this started yesterday. I've deleted folder in appdata with no success.
I would like to create simple no render animation like this one
[URL]
I can't get CS 6 to render on the farm after I installed AE CC. I did put the text file in place as described here, but this did not work:
o enable non-royalty bearing mode, place a blank file named ae_render_only_node.txt into one of the following locations, depending on the user account type:��
#Install After Effects on the render-only machine.
Footage 1080p 24fps
Win 7 Ultimate 32 bit
6GB Ram
I mostly work on my songs, they are 5 mins long the most, after adding all effect , transitions and etc, i send it to "Render Queue" to make a movie , everytime I send it to render queue to make a movie or render it, since my system is not all that , it takes about 20 hours to finish and I could watch my music video, but I was wondering if there is a short way to render my project or song, so I can b able to see the full song
The quality has to be decent, otherwise I won't be able to tell if the color correction I mde is good enough.If the final rendering takes that long, I don't mind b/c I am gonna be done with my song .Which will be a 720x480 quicktime HD.
I recently had some problems with auto-save. I was working on a project when my computer stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several sequences previously the one I was left with. What had happen?
View 1 Replies View Related
