If I switch from Frame Rendering to Layer Rendering I dont see any difference. Does it has advantages in certain situations to use either one?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I have a very long sequence on CFX (3000 frames). Its a pain everytime a have to render in proxies (30 min). Is there a way to render in the timeline on proxies and from a certain frame? The default is a render starting at frame 1.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I'm working on a german keyboard.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
what is a better tool?
A Colour Correct
B Colour Warper
Are both capable of delivering the same result? Is the underlying tech the same on both and its only a matter of UI?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I'm still tying to get used to Render instead of Process. While this begins to work I find the Render Button in the left side an obstacle when in a pace. Better would be the right side.
View 2 Replies View Relatedwhy after i drag a footage from the gateway into my library, the pending render is still there and it wont render it?... i mean i cant see the footage image after i drag into my library...is it the proxy not working or what?....or is there any setting for it that i did not set it?..
View 9 Replies View RelatedWhat can I do to increase render speeds? I'm getting about 400mbps on my raid. I've got a good gfx card, a ton of ram, but smoke just doesn't seem to take advantage of any of it. Watching my cpu/gpu cycles while rendering it always shows that I am using less than 25% of both. Is there a way to tell it to use everything I've got, I know in nuke, and resolve you can do something like this.
View 1 Replies View RelatedActually, we are working in this project: URL....and we have a big problem, cause our problem is the same like this: URL....
but absolutely out of control.We are desperated, because deadline project is coming to the end..We work in Smoke around 85% and is a 90 minutes film. Is a huge project..We use pre rendered CFX.
Is it possible to do so in Smoke on Mac?
View 6 Replies View RelatedI'm getting this message when trying to output a QT movie from SAP2 SP3.
No problems rendering tiff's et al but I need QTs.
Problem goes away for a while after a hardware restart. Cannot seem to pinpoint the source of this.
MacPro Early 2008, 32GB RAM, QuadroFX4800, OSX 10.8.2
Is there a Repeat Frame hot key? Or a faster way to get a repeat frame other than in the tool menu?
View 8 Replies View RelatedIt seems that you can only decide on your intermediary at the point of first setting up the project? Is this true? Wouldn't it be a good (very good?) idea to be able to change this once you have embarked upon the project? It seems to me that you might want to use the ProRes codec when you are cutting and messing about with your project and then switch to DPX when you want to be careful about the quality of the render files?
Thus you may want to be creative in the render-room saving ProRes format when you can build up lots of decisions, but then switch finally over to the DPX format when you are closing in upon the final project. The current system (unless I have missed something) means that one you have chosen your intermediary render format, you are stuck in that project in that format?
TO mention Liquid for the second time today, you used to be able to right click in the timeline and switch the timeline render format (everything from dv to uncompressed). It could take any codec, frame rate and frame size but then you could decide and change your mind on the render format that you wished to use.
Smoke 2012/2013 on MacBookPro 2.6ghz i7 (mid 2012) with Nvidia650M, 16gb RAM, 768GB internal SSD, Thunderbolt Promise R6, AvidArtist MC-Color & MC-Transport, Intuos4 medium, 24in Apple Mon. Ageing 2009 Mac Pro with ATI5870, but want a 2013 one ;(
Is there a way for me to output certain in and out points instead of a whole sequence. I have a long clip and only want a small section of it, where in Smoke 2013 can I input the in and out points I want rendered? I can't see it in CFX and If I mark an In and Out point on the timeline it still renders the whole clip.
View 4 Replies View Relatedcan render front and matte from CFX to desktop?
View 6 Replies View RelatedI have a 45min show with hundreds of edits in it. A mix of ProRez LT, Intra P2 (brought in ProRez proxy) and H264 5D footage. My intention was to relink all my Intra footage with the RAW and simply import the rest for online but have run into several issues. I'll make a different post outlining my steps and questions on how I've gotten here but my emidiate issue is after consolidating and cacheing all sources material of my master sequesnce, I have pending renders, how to get rid of. Also, all my source material in the sequesnce appears to be still be pointing to the original location and not the cached media.
Smoke on Mac 2013 EXT 1
I don't know what the correct name in Smoke but ussually in Nuke it's called ROI (Region of Interest) , ROI define which area that need to be rendered and which area/pixel which will be ignored to optimize render time. How can i deal with this in Smoke ? For example in 3d space in action module, i put a lot of layers (floating in 3d space) using hires still images (above 4k x 4k). All the layer is put outside the frame (frame size is hd 1920) so they're not visible. The screen is actually blank ( no object is visible at all) . But unbelievable... the render took forever ! Definitely , something need to be fixed.
In Nuke , if the objects are not 'in-frame' then they will be ignored even when i got many super hires images, the render will still be very fast . It won't calculated the 'garbage' objects.
Where does the background render Files store...?
View 1 Replies View RelatedHere to reproduce the bug :apply cfx to a clip. Open cfx and add any fx , for example in my test , i use blur. I then right click the blur node and choose 'create cfx'. I select the cfx and render it. exit cfx to timeline. In timeline i copy/paste or duplicate the clip. So now we have 2 identical clip. Bring the duplicate to the desktop and right click and choose flush render. Now the problem that the flush render, i expect, won't affect the master (original) file. But in fact , it will wipe out the render inside the original clip. Now open the original cfx clip and inspect that the cfx node has lost the render file. This is pretty serious problem. In complex cfx, we can accidentally delete render file and need to spend 'expensive' time to re-render.
View 6 Replies View RelatedHow to get 3D Soft Shadows to work properly in Action with an ATI 5870? I'm getting massive render errors. The best way to describe it is it looks like Z buffer errors. Or in 3D when 2 polygons share the same plane. Lots of black jaggies across the whole frame.
View 2 Replies View RelatedI can't get clips to render to the stone in the background. I am running 2012 SP2. I looked and the Backburner version is 2013.
How do I get rid of this? I have run the uninstaller, but that is less than a complete un-install it seems.
I have a Pegasus R4 and an IMac 16G RAM.
Playback is not in real time with 10 bits uncompressed 4k scan.
I chose the option "Play From Memory" and surprise I can play only 40 frames.
QUESTION : where can I change the quantity of RAM to read more images ?
how can we create freeze frame like we do in FCP. i tried with Command U but that comes with audio and when i stretch on time line it gives handles. where in FCP when i create freeze frame it is like a still frame of JPG or any other file. when i stretch it just increase the duration of the still file.
Secondly if i did chroma key in FCP and i take the freeze frame of the clip, it creates the freeze with matte(alfa or transparent). how can we create that?
Is there a way or a keyboard shortcut to generate a freeze frame from a frame in the timeline?
Smoke 2013 EXT1
iMac 13.2
Mac OS X 10.8.3
16 GB RAM
GeForce GTX 680MX (2 GB)
15 TB RAID 5 (Promise R6)
Blackmagic Design Ultrastudio 3D
FSI LM2461W (broadcast)
how to change frame rate. I have a images 59.94 fps in the edit desk, i want to change to 23.976 fps
View 1 Replies View RelatedI use pr5. I got a clip (.mov with audio) and imported the clip and enable the cache source media so it will be transcoded into stone. Now after i edit the clip into the timeline , i want to reveal the master clip. so i select the clip and the audio as well (sync) and try to do match frame (F key). I got new clip reveal in my desktop but only the video, it got no audio. How to get the audio back from the original source ? why the match-frame is ignoring the audio ? so far i have to do silly steps by re edit the source clip back to the timeline to pair back with the audio. is this a bug ?
View 2 Replies View RelatedI've tried Match Source, Match Content and Match Frame and while they do different stuff, none of them are doing what I'm expecting.
To be clear, if I organize my clips into bins for an edit, I'm hoping to hit match on a cut sequence and the Smoke will take me to that clip in the media panel, and then I would be able to look through alternate takes of the same shot. It's more useful to me for finding similar sources than making a copy of the source which is already in the timeline.
I'm painting a sequence, about 40 frames. I paint 1st round, exit paint, check it, then paint again on the painted seq.
After 4-5 rounds, the painted seq appears darker than the original sequence.
I tried using the frame rate tool and it does convert the frame rate to 25 fps but the length of the clip (in this case it should be :15) isn't changing. I'm not sure what the correct workflow would be in Smoke to do this conversion.
View 1 Replies View RelatedI'm inside cfx where at the end of my network , i attach resize and set bit depth to 10 bit. Then i create a cfx node. The cfx node now cannot be rendered. After finish rendering, it will be back to unrendered state. The project setting itself is set to 16 bit fp. If i set that resize using the same 16 bit , then cfx clip has no problem.
View 4 Replies View Relatedwhat do you need to do to render/process all effects in a record timeline
View 3 Replies View RelatedIs it possible to export/render wireframe 3D objects from Action?
View 3 Replies View Related