Is there a way for me to output certain in and out points instead of a whole sequence. I have a long clip and only want a small section of it, where in Smoke 2013 can I input the in and out points I want rendered? I can't see it in CFX and If I mark an In and Out point on the timeline it still renders the whole clip.
View 4 RepliesActually, we are working in this project: URL....and we have a big problem, cause our problem is the same like this: URL....
but absolutely out of control.We are desperated, because deadline project is coming to the end..We work in Smoke around 85% and is a 90 minutes film. Is a huge project..We use pre rendered CFX.
when caching .png sequences it happens a lot that some portions of the clip are not being cached. Or at least some frames are still pointing to the original .png's so that playback stutters.
This happens both in a normal HD project, but a lot on a current UltraHD 60p project on the proxy-generation (set to 50%). A workaround is adding an effect, render it and commit the clip. But this is not suitable on the big 60p project.
Observing the percentage counter in the lower left corner gives me the strange suspicion that it is happening to those portions of the clip which are being cached during the autosave process. There are a lot of them. Converting is not an option. Mac and storage are fast enough.
Is it possible to use a Sequence as a Source? I like to use stringouts of source clips while editing as well as sections of existing Sequences as source material for new Sequences.
View 2 Replies View RelatedI using Apple Pro res HQ 1920x1080 source files. I'm setting up my sequence to be the same size. However, Smoke resizes everything.
View 3 Replies View RelatedI have a sequence that's 2 and a half minutes long, but my final edit is 2 minutes. I want to change the duration to 2:05 so I can export out various versions.
View 1 Replies View RelatedI tried working on PNG image sequences instead of video footages.the problem is Smoke recognizes the fps as 59.94, and i want to make it down to 25fps.i tried using PAL.cfg, the frame rate did change to 25fps but when the sequences are imported in the timeline, its still 59.94fps.
View 6 Replies View RelatedI am having some issues with the newly added Sequence Publish function added in Prerelease 4. I have tried using both the built in AAF export option, and have tried a custom DPX image sequence with EDL export. The function is able to do the final sequence render in preparation for the publish, however it doesn't ever actually publish either the DPX sequence or quicktime movies I request it to. I am left with a folder which contains the edl or aaf file, but no corresponding media ever gets written out. When I check the jobs tab in the mediahub, it just shows "waiting" as its status, but it never progresses past that point. I have tried this function on three different timelines with different media, and it still won't write out the publish sequence. I am able however, to export the sequences to a quicktime as I would normally.
View 3 Replies View RelatedKind of at my wits end with this software. Decided to give it a proper test on a job involving some wire removal and a bit of 3D comping. Every day brings hourly crashes, corrupted sequences, black frame renders, inability to archive projects, on and on. It's like every shot on this project is a minefield of troubleshooting and trying to find workarounds just to get a render complete. I'm spending easily an extra 20 hours a week just trying to overcome problems with the software.
Now I've got a sequence that I literally spent 4 hours on and just trying to open it brings smoke to a hard crash. Trying to make a cfx clip of the sequence takes half an hour to save so I've only been doing that once a day.
Smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6
I was wondering if there was a way to manually save my timeline. It seems I can set the autosave for every few min, but I'd prefer to be able to save the timeline on my own, like when you get something perfect and don't want to chance a crash between autosaves.
View 6 Replies View RelatedI opened 33 sources as "open as Sequence" behind each other and after doing that double clicking on the source or any source isn't loading it into the source viewer. There is no icon next to the source indicating that it isn't a source. After the fourth selection was open as Sequence. the one that was opened as the first is recycled and the Sequence Icon disappears from in-front of it. So there is only four icons at any given time in the list.
View 5 Replies View RelatedI recently got a movie file from a client. This file is actually an edited video with straight cut edits. So I dragged this from the bin / media library onto the timeline and proceed to chop up the video according to where the cuts are using ctrl v, like how I usually do in premiere pro. I then selected one of the clips and added color correction to this clip. I found out that all the other clips were being color corrected as well.
I removed every thing and re-started from scratch using the source monitor to mark in and out for every cut. This time it worked properly with just the selected clip being color corrected. Is there any way I can do this like in premiere pro timeline with the razor blade but each clip becomes an individual one?
Can Smoke export XML?
What if I edit in smoke and want to export an xml of my sequence for color correction in another app that imports xml.
is it possible to export to a movie just a particular part of the sequence (say frame 100 to 500) similar as you can do in After Effects exporting just a work area?
View 2 Replies View RelatedHaving cut together a short commercial recently, I have been unable to export my sequence/ work. There are no error messages, only incomplete exported versions of the sequence (sometimes 1 second, sometimes 8 seconds!) or nothing at all. It will go through the motions and not generate an exported file.
I have attempted to export my sequence multiple ways - from the timeline, from the media library and from the mediahub - with identical results. I'm totally at a loss. I've also gone back to a sequence which I was able to export successfully one month ago and now I get the same problem - either no result or some fractional piece of the edit - never more than a few seconds. My finished edit, by the way, is a 30-second spot.
For example, here's one way I've attempted to export:
1. I select my sequence from the media library and right-click for export.
2. I select movie, choose my destination, and select a format preset (I've tried just about every preset, hoping it was a preset error of some kind), and
3. I hit export.
Instead of the spinning prompt in the lower left corner, showing me a percentage countdown (or count-up) - which was present a month ago when I was las exporting a show -I get a quick audio mixdown prompt in the lower left then nothing. It all happens in less than 1 second from the time I press "export".
I've copied the console log for your review. This particular effort/ screenshot resulted in an 8-second clip, which is the longest one (still incomplete) I've been able to generate since I attempted to export starting yesterday. Again, my sequence is 30 seconds, and it either does nothing, generates an empty file (45k in size) or creates an incomplete movie file (usually 1 or 2 seconds).
I've been called upon to use Smoke as an intermediate between offline and color session elsewhere. I need to export a DPX sequence for the colorist to work from. Can I easily do this in Smoke? Just conform the offline and export DPX sequence? Also, can I put in handles and include original source timecode?
View 4 Replies View RelatedI'm having issues exporting still frames from Smoke. How do you specify the frame to export as a Single Frame? I can see anywhere where you tell Smoke what frame should be the Single Frame to export from a timeline.
I need to export a series of frames, about 200 in total but they are at random places in a 1 hour 30 min timeline so I need a fast and easy way to get this done.
Is it possible to change the settings of red files that exists in a sequence?
I've tried altering the red import settings of a sequence that contained the same clip cut up and a sequence that contained red files and non-red files, but the change seem to only work on the original clips.
In a future release of Smoke 2013, will it be possible to export an xml to send a sequence to DaVinci Resolve since Autodesk Lustre still does not work on mac?
I understand that Smoke has some great color correction tools, but when it comes to be fast and productive, a dedicated color grading application is what is needed.
I have a huge series of PNG images (name 1, name 2 ...) and I want to import them individually not as a sequence. I also like to set them to a specific length, if possible.
View 3 Replies View RelatedI can't seem to get source clips to Gang with the timeline in the record area, did we lose this? I always gang up my reference with my conform so I really hope we havn't lost this!
View 1 Replies View RelatedI am on a retina Macbook Pro. I am dropping frames. I ran the debug, and they are being dropped by grx, not the disk.1080 29.97 project. all fx are rendered.
View 6 Replies View RelatedIf there is still an option somewhere where I can force my import to be frames and set duration to 5 or 10 frames like in 2012. or force a set of sequences o be imported as one clip.
Update: Found the frames option but no frame durations available. But no single clip available in case of importing multiple sequences or frames that need to be in a single sequence.
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
I have to say that so far, after an intensive week editing a project in Smoke, things are getting quite clear, though I didn't dive deep in CFX, apart for some white balance and curves modification, so I don't have experience with any other FX feature, 3D, etc...
I like Smoke for non multi-cam work, so I think I'm going to implement it in our workflow.
And about workflow is my question: We have a video format, opening title, footage with TV bug as an overlay, music background, and ending title.
When I was working in Final Cut Pro, I could open different projects at once, so it was easy to create a template sequence in a template project, copy and paste the footage in the current project while keeping the fixed elements on the timeline.
Now, Smoke can't open more than one project at a time. I don't even know how to duplicate a project to have a template sequence to modify each time I need.
What kind of workflow required in order to reduce editing time by keeping a template that we can modify each time we need?
Simple way to select multiple clips in a sequence and change their durations to, lets say, 5 frames each. I'm basically trying to make a "stop animation" edit using footage that was recorded with different durations.
View 1 Replies View RelatedTrying to launch Smoke 2013 OSX Ext 1 but the app just stops and hangs at "Analyzing Frames 100%". I've tried rebooting, restarting all services, creating a new user, creating a new project, trying old projects, etc.
View 7 Replies View RelatedI've noticed that when I drop a CC on a clip in the timeline with AutoKey turned off, if I adjust a paramater a keyframe is still added. But, if I enter the module, no keyframe is added. Also, if I enter the module and exit back out, no keyframe is added adjusting paramaters.
View 1 Replies View RelatedQuite often I'll paint up a frame, having forgotten to switch 'current frame' to 'sequence'. Is there any way to copy and apply a current frame's paintups to the sequence after the fact?
smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6
I set up a sequence that is HD, but I have source material that is 2K (2560x1440). When I try to insert or overwrite said source clip to the sequence, it should insert and automatically add a resize node. Instead, it changes the sequence size to match the source size. Bug?
Also, I can't seem to find a way to resize the output of my connectFX node to match the sequence size. For example, lets say I want to comp a bunch of shots that are 2K in action, and then output an HD sequence matching my sequence size. How is this done? I have changed the comp size in action and linked that to the connectfx node, but it just puts the smaller comp size in a black box which is the size of the source material (in this case, 2K).
If I have a 10 frames long clip and a 20 frames long clip for compositing, and with those clips, I wanna set the 10 frames long clip moved 5 frames in Action, How can I do it without Slip and Transparency options? I tried to find the way from Animation tap, but I could not.
View 3 Replies View RelatedI searched through all the key short cuts, looked through the user guide and I'm at a loss where you can nudge a clip back and forth by single frames. I saw you can hold 'D" and SLIP the clips one frame at a time, but not move them outright.
So, since nudging is one of the absolute most basic requirements of any editor, I know it's in there. But alas, they hid it too well. here it might be?
Maybe hiding next to a trim mode I don't see where I can see how my slips and slides affect the area around the clip?