Simple way to select multiple clips in a sequence and change their durations to, lets say, 5 frames each. I'm basically trying to make a "stop animation" edit using footage that was recorded with different durations.
View 1 RepliesHow do you select Multiple clips in a long sequence with many clips? I am cutting a short documentary and I need to move around a large quantity of clips. How do I quickly select a bunch of clips?
View 2 Replies View RelatedI can't seem to get source clips to Gang with the timeline in the record area, did we lose this? I always gang up my reference with my conform so I really hope we havn't lost this!
View 1 Replies View RelatedI have got some questions:
1. How can I select many clips on the timeline? (I work with a Wacom tablet.) When I press the pen onto the tablet and move it, I can only pull the gap. In connect fx it works, when I hold cmd.
2. If I set markers in the timeline, is there a way to also see them in connect fx?
3.There is a function in Final Cut: When I I select a clip from the timeline and press "f" , I can go on working on its source clip in the viewer. Is there something similar in smoke? I cannot find the name for this function, so I cannot search for it in the keyboard shortcuts.
4. If I render something, is there a way that Smoke automatically copies the file (without copying the effects)? The reason for that question is: I applied timewarp to a clip, then I wanted to go on working on the clip in connect fx, but the length of the clip changed - it was shorter. When I went on working in action and put some lense flares and rendered it, everything was bended and looked weird. It looked great but I did not intend to do something like this.
The next questions are no real questions but rather problems.
5. When I work with audio (audio clip locked), I cannot really cut on the music, because 5a. sometimes the amplitudes do not match the music. An example: There is no amplitude, but the music goes on for 2 seconds. 5b. And when it is correct and I cut on the beat and render it, it is not sync anymore some moments later or when I restart smoke. (It only displaces 1 or 2 seconds from the sync.)
6. Since I have updated from pre-release 4 to pre-release 5, I cannot export anymore. I have read a lot on blogs, but I could not really find my problem. I cannot even press the export button.
I want to do rectangular selection (window select) couple of clips. So i try to click and drag (start from any empty area in timeline), but most of the time , i will end up picking up or moving the empty track (gap). In any other editing app , i can simply click and drag but not in Smoke. Yes, i have to click in specific area in the timeline so i can properly create a window selection .
View 9 Replies View RelatedIt's not a show stopper but if you select more than one clip on the thumbnail desktop and pen copy they don't copy to where you place them but jump to be half hidden off the source area.
View 1 Replies View RelatedI tried working on PNG image sequences instead of video footages.the problem is Smoke recognizes the fps as 59.94, and i want to make it down to 25fps.i tried using PAL.cfg, the frame rate did change to 25fps but when the sequences are imported in the timeline, its still 59.94fps.
View 6 Replies View RelatedLaying out multiple clips to tape from smoke 2013 (maybe in excess of 20 - 30 clips at one time) without having to 'ctrl/click' on each clip individually. In every previous edition of smoke I would be able to go to media library, highlight the folder with all the clips in and press 'output' and all clips would be taken to I/O menu. This is a must for multiple playouts to tape which some of us still have to do on a regular basis. AND don't get me started on having to re-timecode every clip individually because someone thought it a good idea to remove the 'step' (increment) timecode button.
And why if i use smoke2013 without the mac menu at the top do I not have an 'Output to' or 'Capture from' VTR menu.
I'm trying to drag multiple clip from timeline into desktop or library but all the clips always got spliced into a single clip. How to keep them as separated clips ? or individual clips ?
View 2 Replies View RelatedI have a Batch with 3 Action nodes inside. Each of these has multiple Geoms tucked away in groups.I only want to see some of the Geoms about half way through the clip.It's raised a few questions:
1) I can only think of animating their transparencies to make them appear at a certain point, is there some other way? Like if it was footage you could use the Timing in Batch.
2)I couldn't find a way to easily select a bunch of Geoms and change their transparency together, I could only do it by using Duplicate mode. But that takes all the parameters from the parent, what if you just wanted to alter one thing?
I could use an expression, but would I have to do that one at a time on all the Geoms?
3) What does the Parenting mode do exactly? can't you just parent thing while in Move mode? What does it add?
4) So I used Duplicate to link the Geoms to one in particular, it doesn't seem to have affected anything I didn't want it to (fingers crossed) and then used an expression on that to link it to a control axis for ease. Does that sound the easiest way?
5) And finally, I was just thinking it would be nice if I linked the transparencies to a control axis of some kind in the Batch, to affect all of the Actions. I half expected to find a 'Control Node' in the box Is there a particular node that would work well as a control axis?
I want to turn on 'constant shape' parameter in gmask and i want to do it for multiple spline. How can i do that ? How to select multiple spline in viewer ? Also, i tried to pick multiple spline using animation editor but when turn 'on' the 'constant shape' , it only apply to single spline.
View 2 Replies View Relatedwhen caching .png sequences it happens a lot that some portions of the clip are not being cached. Or at least some frames are still pointing to the original .png's so that playback stutters.
This happens both in a normal HD project, but a lot on a current UltraHD 60p project on the proxy-generation (set to 50%). A workaround is adding an effect, render it and commit the clip. But this is not suitable on the big 60p project.
Observing the percentage counter in the lower left corner gives me the strange suspicion that it is happening to those portions of the clip which are being cached during the autosave process. There are a lot of them. Converting is not an option. Mac and storage are fast enough.
Is it possible to use a Sequence as a Source? I like to use stringouts of source clips while editing as well as sections of existing Sequences as source material for new Sequences.
View 2 Replies View RelatedI using Apple Pro res HQ 1920x1080 source files. I'm setting up my sequence to be the same size. However, Smoke resizes everything.
View 3 Replies View RelatedI have a sequence that's 2 and a half minutes long, but my final edit is 2 minutes. I want to change the duration to 2:05 so I can export out various versions.
View 1 Replies View RelatedI am having some issues with the newly added Sequence Publish function added in Prerelease 4. I have tried using both the built in AAF export option, and have tried a custom DPX image sequence with EDL export. The function is able to do the final sequence render in preparation for the publish, however it doesn't ever actually publish either the DPX sequence or quicktime movies I request it to. I am left with a folder which contains the edl or aaf file, but no corresponding media ever gets written out. When I check the jobs tab in the mediahub, it just shows "waiting" as its status, but it never progresses past that point. I have tried this function on three different timelines with different media, and it still won't write out the publish sequence. I am able however, to export the sequences to a quicktime as I would normally.
View 3 Replies View RelatedKind of at my wits end with this software. Decided to give it a proper test on a job involving some wire removal and a bit of 3D comping. Every day brings hourly crashes, corrupted sequences, black frame renders, inability to archive projects, on and on. It's like every shot on this project is a minefield of troubleshooting and trying to find workarounds just to get a render complete. I'm spending easily an extra 20 hours a week just trying to overcome problems with the software.
Now I've got a sequence that I literally spent 4 hours on and just trying to open it brings smoke to a hard crash. Trying to make a cfx clip of the sequence takes half an hour to save so I've only been doing that once a day.
Smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6
I was wondering if there was a way to manually save my timeline. It seems I can set the autosave for every few min, but I'd prefer to be able to save the timeline on my own, like when you get something perfect and don't want to chance a crash between autosaves.
View 6 Replies View RelatedI'm trying to add a dissolve on the timeline between two clips as I have many times before and one of them will not allow me to dissolve to or from it. It won't allow any dissolves at all actually.
Both are 1920x1080 10bit clips rendered out of action. Any attempts to put a dissolve on the cut ends up with it being only on the end-tag (the second clip). If it tell it to be centered it puts a one frame dissolve on the end-tag. If i tell it Up To Cut it does nothing. From Cut works as expected.
Is there a way for me to output certain in and out points instead of a whole sequence. I have a long clip and only want a small section of it, where in Smoke 2013 can I input the in and out points I want rendered? I can't see it in CFX and If I mark an In and Out point on the timeline it still renders the whole clip.
View 4 Replies View RelatedI opened 33 sources as "open as Sequence" behind each other and after doing that double clicking on the source or any source isn't loading it into the source viewer. There is no icon next to the source indicating that it isn't a source. After the fourth selection was open as Sequence. the one that was opened as the first is recycled and the Sequence Icon disappears from in-front of it. So there is only four icons at any given time in the list.
View 5 Replies View RelatedI recently got a movie file from a client. This file is actually an edited video with straight cut edits. So I dragged this from the bin / media library onto the timeline and proceed to chop up the video according to where the cuts are using ctrl v, like how I usually do in premiere pro. I then selected one of the clips and added color correction to this clip. I found out that all the other clips were being color corrected as well.
I removed every thing and re-started from scratch using the source monitor to mark in and out for every cut. This time it worked properly with just the selected clip being color corrected. Is there any way I can do this like in premiere pro timeline with the razor blade but each clip becomes an individual one?
Can Smoke export XML?
What if I edit in smoke and want to export an xml of my sequence for color correction in another app that imports xml.
is it possible to export to a movie just a particular part of the sequence (say frame 100 to 500) similar as you can do in After Effects exporting just a work area?
View 2 Replies View RelatedHaving cut together a short commercial recently, I have been unable to export my sequence/ work. There are no error messages, only incomplete exported versions of the sequence (sometimes 1 second, sometimes 8 seconds!) or nothing at all. It will go through the motions and not generate an exported file.
I have attempted to export my sequence multiple ways - from the timeline, from the media library and from the mediahub - with identical results. I'm totally at a loss. I've also gone back to a sequence which I was able to export successfully one month ago and now I get the same problem - either no result or some fractional piece of the edit - never more than a few seconds. My finished edit, by the way, is a 30-second spot.
For example, here's one way I've attempted to export:
1. I select my sequence from the media library and right-click for export.
2. I select movie, choose my destination, and select a format preset (I've tried just about every preset, hoping it was a preset error of some kind), and
3. I hit export.
Instead of the spinning prompt in the lower left corner, showing me a percentage countdown (or count-up) - which was present a month ago when I was las exporting a show -I get a quick audio mixdown prompt in the lower left then nothing. It all happens in less than 1 second from the time I press "export".
I've copied the console log for your review. This particular effort/ screenshot resulted in an 8-second clip, which is the longest one (still incomplete) I've been able to generate since I attempted to export starting yesterday. Again, my sequence is 30 seconds, and it either does nothing, generates an empty file (45k in size) or creates an incomplete movie file (usually 1 or 2 seconds).
I've been called upon to use Smoke as an intermediate between offline and color session elsewhere. I need to export a DPX sequence for the colorist to work from. Can I easily do this in Smoke? Just conform the offline and export DPX sequence? Also, can I put in handles and include original source timecode?
View 4 Replies View RelatedI can't find a way to add clips to an existent archive....
View 3 Replies View RelatedWhat I don't get is when it says "navigate to the project that contains the clips you want to copy." Does that refer to /usr/discreet/project/<project name>? Because when I navigate to there, I don't see any media to import.
View 3 Replies View RelatedI have a folder of clips that I'd like to unrender then archive so that I just end up archiving the metadata. I can't find a way to do this in Smoke 2013. When I choose archive links only the archive seems to be massive so my guess is it is still archiving rendered shots.
View 5 Replies View RelatedI was wondering if when I stop a looping clip playing in my timeline, I could have it stop at the frame I stop on instead of stopping at the positioner or in-point. This is a very vital problem I'm having.
I have come up with a work-a-round but it doesn't work near as smoothly as I would like it to.
All I do for the workaround is instead of hitting space when I stop, I hit right alt to set an in point then hit space to stop and "A" to move to my newly created in-point. But it doesn't work as smoothly as it should. I would really like it to perform like playing a clip in the desktop works. It just loops around and when I stop, it actually stops.
We're having an issue loading avc-intra clips. The audio is coming in fine but we only get black for video.
View 1 Replies View Related