AutoDesk Smoke :: Nudge Clip Back And Forth By Single Frames
Aug 12, 2011
I searched through all the key short cuts, looked through the user guide and I'm at a loss where you can nudge a clip back and forth by single frames. I saw you can hold 'D" and SLIP the clips one frame at a time, but not move them outright.
So, since nudging is one of the absolute most basic requirements of any editor, I know it's in there. But alas, they hid it too well. here it might be?
Maybe hiding next to a trim mode I don't see where I can see how my slips and slides affect the area around the clip?
View 2 Replies
ADVERTISEMENT
Feb 6, 2013
Is it possible to nudge a video segment or audio clip in timeline with a short cut key?In FCP7 I used this all the time.
View 4 Replies
View Related
Jan 31, 2013
If there is still an option somewhere where I can force my import to be frames and set duration to 5 or 10 frames like in 2012. or force a set of sequences o be imported as one clip.
Update: Found the frames option but no frame durations available. But no single clip available in case of importing multiple sequences or frames that need to be in a single sequence.
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
View 2 Replies
View Related
Jul 29, 2011
If I have a 10 frames long clip and a 20 frames long clip for compositing, and with those clips, I wanna set the 10 frames long clip moved 5 frames in Action, How can I do it without Slip and Transparency options? I tried to find the way from Animation tap, but I could not.
View 3 Replies
View Related
Dec 26, 2012
I have a single frame clip in my library, i want to put this clip into my timeline and i want it to be 10 seconds. I can just easily in/out in timeline and 'overwrite'. i don't like where i'm repeating a single frame and then still need to render it as 10 seconds clip.
This should be done like 'repeat' in the desktop tools. So in timeline when doing 'overwrite' , Smoke has to be smart to detect 1 frame edit so it just need to 'repeat' it not to 'timewarp' it.
And the another BAD thing , i can't have 'repeat' tool inside cfx . why ? so have to repeat the clip outside the cfx and go back into cfx.
View 3 Replies
View Related
May 6, 2013
I'm working on a simple effect that consists of three layers. The bottom layer is a background, the middle layer a gap effect with text and the top layer is a CFX layer. In that CFX layer is the back clip which is made up of the middle and bottom layers and a text node. The back clip is piped into an action background and the text node is an action layer. I'm doing a simple light bloom on the text inside of action.
If I understand CFX back clips correctly, shouldn't it update if a make a change to the middle or bottom layers? In this case it's not. I have to save my action and text nodes, go back out to the timeline, delete the CFX and create a new one. Then go back into CFX and re-apply the action and text nodes that I saved.
Is there a way to refresh the back clip of CFX to reflect the changes made underneath it?
View 9 Replies
View Related
Nov 22, 2012
1. I put a clip in a timeline , then i put a cfx clip on top of the first clip. Add axis clip to cfx clip, set transparancy to 100% (fully transparent) , when hit render , this cfx is still calculated.
2. if i have stack of cfx clips, the clips are solid (no matte or transparancy ). one clip is on top of the other. In the top layer , i add a axis fx and cut a very small hole. We can see even a very small hole ( that will exposed small part of the bg ) will trigger smoke to render both of the clip full frame. Actually i only will see small part of the BG so i'm expecting smoke to render only that visible pixel. How to control this ? In some case i will waste my time waiting smoke to render part that i don't need.
View 6 Replies
View Related
May 9, 2011
I'm having issues exporting still frames from Smoke. How do you specify the frame to export as a Single Frame? I can see anywhere where you tell Smoke what frame should be the Single Frame to export from a timeline.
I need to export a series of frames, about 200 in total but they are at random places in a 1 hour 30 min timeline so I need a fast and easy way to get this done.
View 2 Replies
View Related
Jul 25, 2013
I am on a retina Macbook Pro. I am dropping frames. I ran the debug, and they are being dropped by grx, not the disk.1080 29.97 project. all fx are rendered.
View 6 Replies
View Related
Oct 8, 2013
Actually, we are working in this project: URL....and we have a big problem, cause our problem is the same like this: URL....
but absolutely out of control.We are desperated, because deadline project is coming to the end..We work in Smoke around 85% and is a 90 minutes film. Is a huge project..We use pre rendered CFX.
View 1 Replies
View Related
May 12, 2011
All of a sudden, I'm unable to scroll through clips with real time feedback. Did I turn on some preference?
Also, I've noticed that when I'm in Action, I don't get realtime feedback going to the broadcast monitor, but rather the image catches up upon pen up. I don't see anything about it in the options in Action or global preferences.
View 2 Replies
View Related
Feb 3, 2012
is there a way to put a LUT on a clip, without having to 'bake' (process) it? So I can turn it on and off?
Our process is:
import R3E Raw files with User Settings in Red Log (so the image looks flat, with most color information).
then turn on a Display LUT (which settings would I use here?)
then do the color correction with the LUT on and after I'm finished, turn the LUT of and then export a dpx 10 Bit sequence to the vfx department, so they can work with it (in fusion).
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 3 Replies
View Related
Mar 18, 2013
Is there a way for me to output certain in and out points instead of a whole sequence. I have a long clip and only want a small section of it, where in Smoke 2013 can I input the in and out points I want rendered? I can't see it in CFX and If I mark an In and Out point on the timeline it still renders the whole clip.
View 4 Replies
View Related
Jul 15, 2013
Trying to launch Smoke 2013 OSX Ext 1 but the app just stops and hangs at "Analyzing Frames 100%". I've tried rebooting, restarting all services, creating a new user, creating a new project, trying old projects, etc.
View 7 Replies
View Related
Feb 28, 2014
I've noticed that when I drop a CC on a clip in the timeline with AutoKey turned off, if I adjust a paramater a keyframe is still added. But, if I enter the module, no keyframe is added. Also, if I enter the module and exit back out, no keyframe is added adjusting paramaters.
View 1 Replies
View Related
Jan 15, 2013
I just started playing around with Smoke 2013. I played around with the CFX and did some keying. Now, on the timeline, I have a clip with CFXa and an axis effect. Now I thought, that it should be a container, and that I could simply double click the clip, step into the container and copy out the matte. But that doesn't work anymore, since double clicking now enters the editor again.
So, how can I access the matte (and how can I step into the container)?
Oh, and now that the unrendered clip is on the timeline, I only get the message Unrendered Frame. Obviously Smoke can't play back an unrendered clip, but why doesn't it at least show the frame I'm parked on? And also, I started rendering, but it took forever, so I stopped after 10 min. In Smoke 2012 it rendered at least partially, but now I still only have a dotted line......
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 4 Replies
View Related
Aug 28, 2012
Tell me that I'm wrong on this but with the new CFX clip in SP3, it looks like you can't update the original CFX Clip and have it update/link to all shots where it is placed. It would be so perfect. Now it is just another "fancy" way to copy&paste comps?
View 6 Replies
View Related
Sep 15, 2012
Is there a way to remove/delete the history from a rendered clip, other than re-rendering the clip without history enabled? Flame has a desktop function that can delete the history from an entire desktop (which would be convenient in my case here on Smoke 2012).
View 2 Replies
View Related
Feb 7, 2013
Is there any short cut for moving the clip from one track to other(above or below track)?
like we have in FCP.
View 4 Replies
View Related
Nov 20, 2012
can i clone (not copy) cfx clip ? so any update made to the cfx clip will automatically update all the instance ?
View 2 Replies
View Related
Aug 16, 2011
I created a stereoscopic timeline in Smoke. That seems to work so far, but now I want to output it in full resolution on a 3D TV (Samsung). The TV only supports HDMI in.
I'm working on a Smoke for Mac 2012 with a NVIDIA Quadro 4000 (which has 1xDVI and 2x Display Ports). And we have the AJA Kona 3G (SDI out and mini HDMI). We have a reference monitor which is connected via SDI and that works.
We tried to connect the Mac via mini HDMI to HDMI. We did get a signal from Final Cut Pro, but we didn't get a signal out of Smoke.
I tried all kinds of settings, but there is no way of outputting an image from Smoke. What options do we have, so we can get a 3D signal out?
I heard that Smoke for Mac doesn't support Dual SDI out. Is that right? Would it work to simply buy a converter from SDI to HDMI? Would I still get full res HD out then?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 3 Replies
View Related
Jun 5, 2012
I have R3D footage which I imported in 2K. For a couple shots I need a higher resolution, so I matched out my original clip from my timeline, saved it to my library, double clicked and selected Modify Clip History, where I set my layering to full. I don't change anything else, however, now my In and Out TC are not correct anymore! Everything is fine, just until I hit the Modify Clip History and Apply the changes.
View 5 Replies
View Related
May 17, 2013
I am trying to export a :30 spot and only :04 clips are exported.
View 1 Replies
View Related
Sep 19, 2012
what does exactly mean the red line under a clip in the timeline ?
I noticed the clip with red timeline has red effect, but it doesn't seems to mean i have to render them.
View 2 Replies
View Related
Mar 5, 2013
in paint module, when i do the 'wipe' , i only can wipe the single/current frame. I can't find the setting to wipe the whole clip. am i allowed to wipe the whole clip using a single click ?
View 1 Replies
View Related
Dec 1, 2012
How to hide selected clips in timeline without turn off layer visibility (eye icon) ? i found no hotkey and also there's such option in contextual (RMB) menu.
View 1 Replies
View Related
Jul 7, 2013
So I have a soft imported clip with cfx applied...right click consolidate handles...and it seems to work...
But then archiving gives a crazy size estimate so I checked handles again...it turns out the handles haven't been consolidated at all. Timeline says it has been consolidated but entering cfx and exiting again the handles come back.
View 3 Replies
View Related
Dec 7, 2012
I need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?
View 4 Replies
View Related
Nov 17, 2012
I got a clip in timeline, apply connect fx then cut the clip (ctrl-v). The problem i cannot uncut this clip immediately , even if i haven't changed/modified anything yet. The simple solver will be throw out one part and trim back the clip. I'm just curious .. Is this normal ?
View 2 Replies
View Related
Jul 22, 2013
Kind of at my wits end with this software. Decided to give it a proper test on a job involving some wire removal and a bit of 3D comping. Every day brings hourly crashes, corrupted sequences, black frame renders, inability to archive projects, on and on. It's like every shot on this project is a minefield of troubleshooting and trying to find workarounds just to get a render complete. I'm spending easily an extra 20 hours a week just trying to overcome problems with the software.
Now I've got a sequence that I literally spent 4 hours on and just trying to open it brings smoke to a hard crash. Trying to make a cfx clip of the sequence takes half an hour to save so I've only been doing that once a day.
Smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6
View 5 Replies
View Related
Oct 19, 2011
I'm trying to apply noise to a shot using the ReGrain effect. BUt it's not working....no matter what settings I try (e.g. custom and then playing with the sliders) I don't receive any effect.... is there anything I have to be beware of?
Or is there another way to apply noise to a clip?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 1 Replies
View Related
