I don't know why Corel made this program without the ability to change the playback speed in project view. You can only change the speed on each clip. When you have 50 or more clips, this can take all day, when it could take a few seconds if you can do it in project mode.
View 10 RepliesIf I playback in fragment mode, the speed is ok. But if I playback in project mode the speed is a little slowing down.
How is this possible ?
VSX5. Instant project vertpanels 2 Is there a way to slow the speed down(or pause) some of the placeholders so that they on the screen longer.
View 6 Replies View RelatedI'm using Videostudio x4, a recent installation on a 2 week old 'Dell Inspiron one 2320'. The computer is an 'All in One' and runs great generally.
Members, I seem to remember when I was running what was back then the Ulead version years ago, and, that it was better to have a second hard drive as a scratch disk for the realtime, or Timeline project playback, the reason I ask, I still suffer some jerky-ness when picking 'Project' in the edit playback window, I do not suffer problems when rendering the project as a final video format.
The Dell spec is the highest I could get, a i7 intel 3.8 processor, 8gig ram, 2tb HD, 1gig Nvidia Gforce GC, Intel HD sound card, with a monitor of 1920x1080 Full HD, the USB is 2.0 (3.0).
If the idea is a sound one, what changes do i make and where in the settings do I make them, also would using a 16 gig Patriot flash dongle be any good, or should I get a bigger HD for the job, either 30 to 60 gig SSD or bigger 7200rpm HD type.
Since quite some time I have been succesfully uploading FullHD (AVCHD 1920x1080 50i) movies on YT. Some weeks ago I got a strange playback problem with my last uploads: video's are played in (very smooth!) slow motion mode at some resolution settings. The same Divx video's on the contrary always playback OK In order to illustrate the YT playback speed problems I uploaded two times the same 10sec video. The first video has been rendered as a fullHD AVCHD video in VSX4 (never got problems in the past with similar video’s), the second is a fullHD DviX version of that same video (from another converter). The lower resolution settings in the AVCHD video slow down while the 720 and 1080 settings run OK [URL]
View 2 Replies View RelatedI am using a title that scrolls across the screen, by spelling out one letter at a time.
However, I feel the speed is a bit too fast, and I'd like to slow it down.
I try extending the length of the clip, but this doesn't seem very effective.
How can I slow down the speed of this title movement?
I have a video shot from inside a vehicle driving down a rural French road. I would like to increase the speed to 110% to 115% as the video progresses to match the music I will overlay it with.
I know how to increase the playback speed, but I can't seem to find if it's possible to do it gradually. Everything I try increases the speed all a once. Is this possible (gradually increase speed) with the Playback Speed settings, or do I need to make two clips of the same segment, 1 at regular speed and 1 at the final speed, and use a long transition between them?
I am trying to reduce my playback resolution and the information you provide in the help section does not match my screen so I cannot find the setting options for this
View 1 Replies View RelatedI am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
I am not new to this software and have made many videos. The problem is that I got a new computer with Windows 8 and installed X4 VideoStudio. I can hear the sound file when I select the clip but as soon as I select Project, there is no sound. I am currently uninstalling the program and trying to reinstall.
View 2 Replies View RelatedI started to work now with HD clips captured from my new HD camcorder. At the EDIT step, the play back of the entire project is not smooth, there is no continuity of the video and the audio. After the SHARE/CREATE VIDEO FILE step, the play back runs good.
View 4 Replies View RelatedVideo and overlay track are lagging during project playback Does not lag when clip playback. I need to preview all the tracks to make corrections. Also note that when fully rendered it does not lag. Even when playing single track lag is noticable. audio, vocal, and title tracks are fine when playing back. Its just Video and overlay track that are lagging
View 1 Replies View RelatedI have created a project and have gotton far into it. All of a sudden on playback it stops in the same spot. I tried deleting the frame ans reinserting the picture but nothing seems to work? On previous playbacks along the project creation it didn't stop. Is this a bug?
View 2 Replies View RelatedI have imported 5 clips into Videostudio Pro X4, all taken concurrently with the same camera/settings etc. If I play back a single clip, the quality is as I would expect it to be. If I switch to playing back project rather than clip, there is a noticeable drop in quality.
View 3 Replies View RelatedI am editing a video and the footage is an HD .mov (30 fps, 24bit 1920x1080 48s in length) file recorded directly from a logitech webcam. The clip plays fine in the Library, but when I add it to the storyboard/timeline the video plays super fast, then goes blank for the duration of the clip.
View 2 Replies View RelatedWhen I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies View RelatedWhen trying to lay a music track in my project from the Auto Music library, I am unable to adjust the level of that music. Prior to laying the track the volume control is grayed-out and unavailable.
After the track is laid and the volume control is available, it has no effect on the music level in the laid track.
After staying away from video editing for some time I have just installed VS X5. But here I can't find the Audio View in which I could adjust the sound volume (using the graph) in the video track. Has it gone away or is it just that I can't find it?
Does this mean that I have to split the audio from the video to be able to adjust the volume (up and down at various places, not just the track volume).
I am running ACA 2011 x64. Recently I have been unable to save a view drawing in the project manager. When I press the save button it a window pops up telling me it cannot save the drawing in my project folder and saves it as a .tmp file.
View 5 Replies View RelatedUnable to add more than one project to a blu-ray disc
View 5 Replies View RelatedI'm running VideoStudio Pro X5. I spent all day yesterday on a little project and wanted to get it to youtube afterward. Unfortunately, none of my share options seem to be working! I've tried creating a disc, creating a video file, and uploading directly to youtube, but after everytime I try, I get an error message and VideoStudio closes out. I tried with the demo of X6 as well. The error message says APPCLOSE and gives the dump file, I believe.
View 2 Replies View RelatedI have downloaded few instant project templates Yet when I go to the Instant project window I do not see the import Icon . I only see the orange Icon(get more content). Is there something wrong with the installation of my VSPro x3.
View 1 Replies View RelatedIn the past I was able to download a slideshow of photos that was burnt to a dvd and play it on the TV with the use of the dvd player.I have upgraded to windows 7 home premium .I have purchased VIDEOSTUDIO PRO 5 X..I have burnt a DVD-RW and watched it on my computer but it will not work on the DVD player or TV. Should I be able to do this with my VIDEO STUDIO X5? do I have to buy more software.
View 9 Replies View RelatedI just installed Ulead VideoStudio 10 on Windows 7 and am having problem viewing .avi files even the sample ones with the installation, also the audio is not working. everything works fine on Windows XP. Is there a patch or Ulead VideoStudio 10 is not compatible with Windows 7?
View 3 Replies View RelatedI'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
I want to know if I can use Paint.Net DLL's in a personal proyect to adjust image quality.
Specially, I interested in Autolevel adjust.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
Unable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
I have installed After Effects CS6 in a Mac running 10.6.8(Snow Leopard) with 4 GB ram and have installed all the updates of After Effects. Whenever I try to get the audio output, i get an error: " After Effects Warning: Unable to start audio playback. confirm your audio hardware is properly configured or change the driver selection in Preferences: Audio Hardware "
I tried to reinstall the software and also I tried the Audio MIDI Setup configuration but it too is of no use.
When I try to combine 2 videos to play over each other (i.e. one full screen one anchored in a corner) the overlay track plays at an accelerated rate with no sound, whereas the main video will play as normal. However if I switch them around the same problem arises, the overlay video plays fine the main accelerated with no sound.
If I play them separately they will both play fine. The video I am trying to anchor was recorded with a webcam and therefore may be the problem. If I need to give more details w/ specs etc.
I'm near completion of a year long video project. I inserted several HD video clips into my VS X4 time line which includes many other HD/SD and .jpg clips along with transitions, music, etc. For effect, I used the tool in VS to speed up two or three of these clips by about 300%. Without the effect, the scene doesn't work so I'd like to keep it this way.
I noticed that when playing the clip in the time line after the effect is added, it plays very jumpy and jerky. Without the effect it plays fine as do all the other clips in my project. I am guessing the effect puts a strain on the system but mostly, my system is fine. However, the hard drive may be the culprit and not able to get the data fast enough to provide a smooth video. Is that possible? My cpu (core 2 quad Q6600 clocked to 3.0 g), new video card, memory, and monitor (HD certified) are all new and well within spec.
My question: Do you think the stuttering video will also be present in the final burn of a Blu-Ray? Or is this just a function of the preview window?