VideoStudio :: X5 - Unable To Share Project In Any Way
Jun 6, 2013
I'm running VideoStudio Pro X5. I spent all day yesterday on a little project and wanted to get it to youtube afterward. Unfortunately, none of my share options seem to be working! I've tried creating a disc, creating a video file, and uploading directly to youtube, but after everytime I try, I get an error message and VideoStudio closes out. I tried with the demo of X6 as well. The error message says APPCLOSE and gives the dump file, I believe.
I am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness. [URL]...........
PS MediiaInfo General Complete name : D:2012_03_22 Lorikeets.AVI Format : AVI Format/Info : Audio Video Interleave File size : 25.6 MiB Duration : 30s 0ms Overall bit rate : 7 167 Kbps
Video ID : 0 Format : AVC Format/Info : Advanced Video Codec Format profile : Main@L5.0 Format settings, CABAC : Yes Format settings, ReFrames : 1 frame Format settings, GOP : M=1, N=15 Codec ID : H264 Duration : 30s 0ms Bit rate : 6 519 Kbps Width : 1 440 pixels Height : 1 080 pixels Display aspect ratio : 4:3 Frame rate : 15.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.279 Stream size : 23.3 MiB (91%)
Audio ID : 1 Format : PCM Format settings, Endianness : Little Format settings, Sign : Signed Codec ID : 1 Duration : 30s 0ms Bit rate mode : Constant Bit rate : 512 Kbps Channel(s) : 1 channel Sampling rate : 32.0 KHz Bit depth : 16 bits Stream size : 1.83 MiB (7%) Interleave, duration : 1000 ms (15.00 video frames)
I don't know why Corel made this program without the ability to change the playback speed in project view. You can only change the speed on each clip. When you have 50 or more clips, this can take all day, when it could take a few seconds if you can do it in project mode.
I have downloaded few instant project templates Yet when I go to the Instant project window I do not see the import Icon . I only see the orange Icon(get more content). Is there something wrong with the installation of my VSPro x3.
What's the easiest way to send a project to a collaborator outside my facility? Everything will remain in Smoke. All media files exist at both locations so we just need to be able to share the project files. Is an archive the best bet?
I have been making and sharing shared parameter files for years... For some reason today a co-worker's shared parameter file is invalid or could not be read...
We have run a couple of tests - I can create one on my computer and send to her without any issues... Any that she creates and sends to me - is invalid... WHY?
I am running Photoshop Elements 5.0 on Windows 7. I receive an error message when trying to share photos using Outlook 2010. I have selected Outlook as the Client E-mail in Preferences / Sharing. I have ensured that Outlook is the defaul e-mail in Windows Internet Control Panel. This feature used to work for me before I had to re-install Elements because my computer crashed.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I am trying to make a simple graphic by cutting and pasting a picture into a new project, but when I open up the edit drop down menu, the options for copy or paste are not highlighted, so obviously they are not available. The only reason I can figure out is that somehow, unintentionally, I opened something on the right side that says edit/create/share. How to close this feature and in the gray rectangle box under those words, it is asking me what I would like to create. I just want to make a simple graphic, but because this project program is open I can't make the graphic I want. how to close this project program (Edit/Create/Share).
I am not able to share photos by attachment to e-mail with Elements 11. After I select the photos, etc. it goes through with "preparing photos" and that is it. It just goes back to the calendar screen shot.
I’ve just produced a short video, intended for Youtube, but in the ‘Share – create video file’ step can find no options to produce an mp4 file in 16:9. My preferences were set to 16:9 right from the start and all the material is either originally 16:9 or cropped to 16:9, so it would be nice to produce the video as 16:9. I tried a few other file type options that I thought might be suitable for uploading but can’t find anything on offer that would produce a small file size in 16:9.
With Photoshop 11, when I Share a photo through Email attachment I am unable to add any text to the Email. Can this be fixed? If I purchase Photoshop 12 will I eliminate this problem?
I have been using this great and just now I lost the ability to open a share module. I can see the module but there are no options in the module so I am unable to do any share with it. What happened to the share module and how do I get it back? Also while looking at the I clicked on the capture module and it is not showing any option either. It looks like I have lost these. So now I can neither capture or share. The edit seems to be working but not the others. I have rebooted the computer and that did not work.
My video won't share as a MPEG-4 HD. Here are the steps I take:
1. Click the "Share" Tab 2. Click "Create Video File" 3. Click "MPEG-4" 4. Click "MPEG-4 HD 5. Select the destination folder for the output 6. Click "Save".
The progress shows 0% and the progress bar goes away after fifteen seconds. I am sharing it as an MPEG-4 HD file because it will be placed on Youtube by someone else. I've probably done four of these projects the same way and they execute just fine.
Here's some more informtion:
Brand: Dell Laptop HDD: 464GB; Used Space 153GB; Free Space 311GB Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz Ram: 8GB System Type: 64 Bit Operating System Pen and Touch: Pen and Touch is available through 80 touch points The video is a WMV2, 24 bits 1024 x768, 29.982 frames/second; Audio is windows media audio version 4, aspect ratio is 1.33 x 1.00. It is editable.
Here's how my timeline looks:
BLACK GRAPHIC = 2 SECONDS; TRANSITION (FADE TO BLACK) = 2 SECONDS; 10 SECOND CLIP; 3 SECOND CLIP; 00:42:33 CLIP.
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
I have Pro X2 sotware. I have tried very unsuccsessfully to record onto a DVD disc from my video Share panel. I can get onto the template dialogue box, when I press next to record on the Disc, it goes to back, and will not go on to the next dialogue box.
I have plenty of memory and Ram. I use Windows 7. I can get onto Pro X2 ok and can download to create a video file, but I cannot create a disc.
is there a way to share "create final video" in 1024x768 mp4 h264?
because my source video is in 1024x768. i can create final video in 640x480 but quality is lower. and when i create final video in 1280x720 or in 1920 x 1080.(presets of MPEG-4 in videostudio x4), i always get black borders on sides and ALSO under and above.
New PC (Dell) with Vista 32; re-installed first VS10+.
Because I have now Vista 32: I bought and installed a full VS12 (X2 PRO?).
Problem: when I go to the Share-step I can add clips to the project but I cannot see them in the right. So cannot add chapters or trim the clip in the share step. The buttons below the preview window stays inactive.
When I go further: I cannot see the preview of the video "Press 'play' button to start preview" stays on the screen.
When I go further till burning (DVD-folder), the program makes the folder.
I have been meaning to ask this question when using previous versions but forgot so here goes Now using ProX4 (boxed upgrade) and it has the same prob as with previous versions namely that when on the Share step and adding a music file to one of the Gallery intro scenes I have not found any way to control the volume of that sound as it blares out LOUD on preview and in the final DVD video. If the viewer of the DVD video subsequently lowers that sound level then the sound level is too low for the following video. I have made a sound file at the sound level I need but even that is ignored and the sound on the intro screen is LOUD again. Corel Support advised me that I can adjust the volume when in the preview prior to butning but that does not affect the level on the final DVDF.
I've been trying to add a camera to my project but when I do, instead of just popping up in the layer section it also pops up lines in the actual project, which is not supposed to happen.Also, when I try to zoom in or do anything with it, the camera lines on the screen reacts to it but not anynthing else.
Not the text, not the background, not the reflection, not the logo's, nothing!
I am having problems with void that i cant hide in my project. The void is inside my generic family but wont apply a cut unless i apply a length parameter to it. The problem i that in my project it seems to be visible as a yellow box that will also appear when printed.
Is it possible to hide this in the project by any way?
I am unable to import this planter box i created into the project I am working with. I have attached the planter box family file (rfa) I am working on and and a screen shot image (jpeg) of the planter box once it's imported into a project. I used another planter box template to create my family. Perhaps the file path is not set up correctly. Insert this family file into a project file.
On my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
Having just download a free trial and being very new to revit--I notice when I open revit and the project I have been working on I can see faintly and briefly the properties and project browser box but they disappear as it's opening and I cannot figure out how to get them on my screen.
Did I hide them somehow with out realizing it? Where do I go to get them back on my screen again?
I just purchased the PSP X3 Ultimate. Installed everything with no issue. Rebooted edited a photo saved it then opened Project Creator to upload it to Facebook. Put in my correct email and password. Yet I get the error of:
Unable to connect Please check your network connection.
the same machine that has PSP/Project Creator there is nothing wrong with my network connection. I've checked my UN/PW for Facebook and my connection and everything is correct.
It appears I can not even connect via PSP to check for updates etc.
When setting up a new project, I'm unable to change the bit depth for the project. It's set to 8-bit and ghosted. The graphics render button has a selector but when clicked it doesn't bring up the drop down.
My guess is that it has something to do with my hardware configuration (read: I need to upgrade my GPU) .
I am unable to open folders in project creator i have done what corel has suggested by still dont work. I am unable to contact via email as that dont work as i get failed to create a case.
