I have been making and sharing shared parameter files for years... For some reason today a co-worker's shared parameter file is invalid or could not be read...
We have run a couple of tests - I can create one on my computer and send to her without any issues... Any that she creates and sends to me - is invalid... WHY?
Starting brand new project. Would like to change the name of some shared parameters within my txt file. As far as I know you cant chnage the name once its established witin Revit (unless theres a third party app). Would there be any issue withi this? Utimately I am pushing these parameters into new geometry and I would like them to better conform to a standard for a particular customer. I rennamed JUST the parameter name and it seemed to work ok.
View 2 Replies View RelatedThe Developers Guide explains how to create e.g. shared String parameter and import them into the project.
I actually want to create a parameter which has a fixed set of possible values, which is normally referred to as enumeration type in programming languages. The user shall be able to choose one literal from a combo box in the Properties view.
PS I don't have the requirement that it is a shared parameter, it can also be "only" a project parameter, but i didn't found out how to create these.
I am having some issues getting a shared Volume parameter to work and report in a tag correctly. I can get the tag to report a value, but it is reporting the a value based on default values of the column (9*2*2) and not the value of the actual column (shown in the properites). Also, the tag I create reports a question mark, not the volume calculated. I've tried this a million times so it could be I have crossed up a parameter somewhere.
View 9 Replies View RelatedI am making a nested family of windows and inserted the windows as shared and I need them as non shared. Is there a way to change the window from shared to non shared in the family editor?
View 2 Replies View RelatedWe have centralized our content for our Revit users. We then customize the ini file to insure the paths look to the network locations.
One of my users has said that the proper and only recommended way to update the shared parameters file is while you are in Revit (I.E. have the path to the shared parameters file look to the network location instead of locally) so it updates on the fly. I didnt want to do that as I do not want to alter the "master" copy of the content we have on the network. I'd prefer that the user updates it locally, then we can just copy the file and overwrite the older file on the network.
I find nothing that says it is, but I prefer to explore all options and avenues first.
Looking at a standard door type, the Internal Concept Single Door, I've noticed that it has some parameters set as a Shared Parameter?
Where is the shared parameters file for this?
I'm setting up an office template for use of these, and losing the default functionality is not wanted, if necessary I'll integrate the defaults into my own shared parameters file.
We are working in our office on a central model. the model is stored on a local server within the office premises. We are three people working on it. our problem is this when we open the central file on any of our computer "create New local" check box is inactive. but when one of us login as "Administrator" and then open central file in any of the remaining two computer the " Create New Local" is active.why this is happening and is there any way we can work with the file without loging in as Administrator.
View 5 Replies View RelatedI am trying to put a URL link to a file in a components instance parameter, to show up in the properties palette, I can put the URL in there, but no link is established. How would I get this to link to the file?
View 1 Replies View Relatedwhat is shared parameter?
How to create that .txt file using in shared parameter
When I go to Edit Shared Parameters and then the create button I get an error message "The Shared Parameter file was not saved successfully". I am stuck at this point and cannot go any further. What is causing the problem and how can I work around this. I am using Revit Architecture 2011.
View 2 Replies View RelatedIs there a way of importing cad by shared coordinates, or are autodesk working on this for the next service pack, which would be very useful.
It's great that the 'link cad' does it but why not import cad? This would be very useful as we model certain things (pipework statues,) from point cloud and model on other software, then we bring into revit, so we use the same coordinates as the point cloud (O.S coordinates.)
Also I'm glad that Autodesk have added the shared coordinates to the point cloud insert for Revit 2013.
I am a student working on a research project exploring the integration of LEED criteria with BIM software, and I am exploring the use of both Revit and Excel to accomplish this task. One major problem that I am running into though, is with Shared Parameters.
I have created a set of LEED-specific shared parameters in Revit. These parameters are things like "Plumbing Fixture Family," "Plumbing Fixture Type," "Ventilation Zone," "Refrigerant Use," etc... basically different parameters that will inform an Excel spreadsheet containing formulas to calculate, ultimately, the total points awarded for each LEED credit.
My problem, is that in Excel, the names of the values for these shared parameters need to be very specific in order for it to work with the formulas I have created. What I need from Revit is the ability to create a shared parameter with a drop-down menu containing a set number of options that can be applied to any component in a project, so this can be done early-on in Revit, rather than after-the-fact in Excel. Such as choosing the type of refrigerant used in HVAC&R equipment (and yes, you could just type the refrigerant type into a text parameter field, but if it's not typed exactly as it is in the pre-determined formula it is associated with in Excel, it will return an error in Excel, which is less than desirable - a drop down would reduce/eliminate the margin of error).
Is there any way to accomplish this task? From what I have found online, this is only slightly possible in Family Parameters - I haven't found anything about Shared Parameters.
I have no problem adding a shared parameter, but if I assign it the wrong type and it appears impossible to change it without adding a new parameter under a different name. I then deleted the old one, but Revit doesn't like that. They appear difficult to purge or delete without a hiccup relating to the original label the parameter was assigned to.
Example: I made a parameter for my clients occupied area (Footprint) and used the integer type by mistake. Apparently integers are only supposed to go up to 999. It refused to recognize the "Digital Grouping" so I had to convert over to the Area type.
If I try to change the type the field is grayed out.
I've created a family that represents a poke-through with nested, shared families for different components. Everything visible in plan is made with Symbolic lines instead of Generic Annotations. The reasons being too numerous to explain here.
The problem I'm running into is that the family looks fine when the View Discipline is set to Architectural but when set to Electrical (1/8" scale in both) part of the shared components begin to get masked. I cannot figure out why they are behaving this way, except that some of the lines are creating some sort of masking area in the Electrical discipline. When the nested families are not shared the component looks fine in both disciplines. I've attached images and the family for you to try.
I'm running VideoStudio Pro X5. I spent all day yesterday on a little project and wanted to get it to youtube afterward. Unfortunately, none of my share options seem to be working! I've tried creating a disc, creating a video file, and uploading directly to youtube, but after everytime I try, I get an error message and VideoStudio closes out. I tried with the demo of X6 as well. The error message says APPCLOSE and gives the dump file, I believe.
View 2 Replies View RelatedWith the AutoCAD Revit 2014 I am unable to open DWG file. It gives me a failed to open error. I have attached screen shot below. We did download DWG TruView 2014.
View 1 Replies View RelatedI have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
I am running Photoshop Elements 5.0 on Windows 7. I receive an error message when trying to share photos using Outlook 2010. I have selected Outlook as the Client E-mail in Preferences / Sharing. I have ensured that Outlook is the defaul e-mail in Windows Internet Control Panel. This feature used to work for me before I had to re-install Elements because my computer crashed.
View 1 Replies View RelatedI'm trying to create a new local file but the option is greyed out (not available). We're using Revit Server 2013 and we have one Central Server and two Accelerators in different locations. This issue is affecting only one of the two locations.
View 1 Replies View RelatedOn my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
how to recover this file?
I am trying to make a simple graphic by cutting and pasting a picture into a new project, but when I open up the edit drop down menu, the options for copy or paste are not highlighted, so obviously they are not available. The only reason I can figure out is that somehow, unintentionally, I opened something on the right side that says edit/create/share. How to close this feature and in the gray rectangle box under those words, it is asking me what I would like to create. I just want to make a simple graphic, but because this project program is open I can't make the graphic I want. how to close this project program (Edit/Create/Share).
View 2 Replies View RelatedI am not able to share photos by attachment to e-mail with Elements 11. After I select the photos, etc. it goes through with "preparing photos" and that is it. It just goes back to the calendar screen shot.
View 4 Replies View RelatedUsing Elements 9, I have created an Online Album to share, but it will not post to My Gallery on photoshop.com.
View 1 Replies View RelatedWe are trying to import Point Cloud files having extension .fls into Revit 2012 but are unable to do so. We have attached the screen shots of the messages that we are getting while importing. We have the trial version of Revit Architecture 2012 and need to import the files so that we can convert them to rvt files...
View 9 Replies View RelatedWith Photoshop 11, when I Share a photo through Email attachment I am unable to add any text to the Email. Can this be fixed? If I purchase Photoshop 12 will I eliminate this problem?
View 4 Replies View RelatedI'm trying to make two pads share a curved edge but they just dont seem to be able to do so. I have to leave a gap between the two pads. If i snap the edge together, while the computer regenerates an error pops up saying pads can share edges but cannot overlap. Whats the deal yo?
View 5 Replies View RelatedUsing Revit 2014 LT. Trying to open a file created by another user/seat of Revit 2014 LT (trial version for now).
Error Message reads "The file is open for editing by another user. If you open the file, you cannot save changes until the user closes is. In this case, your changes will overwrite the user's changes. What do you want to do?"
The file is NOT open by another user though.
I realize LT does not allow worksharing, but I assumed that was multiple users working on the same file at the same time. We need to open files one at a time, but by different users.
We are working in revit server with two clients . recently we installed one more Lacal server and i checked the speed and all but whenever i try to open heavy file ( 300 Mb file ) from revit server it giving error after some time that server not responding and not open the file . but i checked 15 to 30 mb file it working in same server . Is their any size limitation in revit server . My internet speed is ok that time . So i think its related to revit server
View 5 Replies View RelatedI noticed that my computer was slowing up, BIG time. This thing's got dual quad core Xeon, 12gb DDR3, ATI FireGL V8600, etc. I could hear it processing something constantly and as I was in CAD I couldn't really do anything. When I opened the task manager and looked at the processes, "accoreconsole. exe" (an AutoCAD component) was using 10.5gb of memory. On my performance tab, my memory was maxed at 11.5gb for at least a half hour.
Today, I dealt with it all day long by ending the process whenever I'd notice it on the list of processes, or if the computer suddenly began to lag. I've also been having trouble with Dropbox. Not sure if this would at all be related but, if I try to save a file to a shared dropbox folder, it gets to 81% and freezes with the (Not Responding) message up top. I can save just fine to my network folder though.
I want to change the lower case words in shared parameters to upper case. Is there any way to make such a change in .rfa/.rte/.rvt file.
View 1 Replies View Related
