Revit :: Create Shared Parameter With Enumeration Type
Mar 1, 2012
The Developers Guide explains how to create e.g. shared String parameter and import them into the project.
I actually want to create a parameter which has a fixed set of possible values, which is normally referred to as enumeration type in programming languages. The user shall be able to choose one literal from a combo box in the Properties view.
PS I don't have the requirement that it is a shared parameter, it can also be "only" a project parameter, but i didn't found out how to create these.
I am having some issues getting a shared Volume parameter to work and report in a tag correctly. I can get the tag to report a value, but it is reporting the a value based on default values of the column (9*2*2) and not the value of the actual column (shown in the properites). Also, the tag I create reports a question mark, not the volume calculated. I've tried this a million times so it could be I have crossed up a parameter somewhere.
I have been making and sharing shared parameter files for years... For some reason today a co-worker's shared parameter file is invalid or could not be read...
We have run a couple of tests - I can create one on my computer and send to her without any issues... Any that she creates and sends to me - is invalid... WHY?
Starting brand new project. Would like to change the name of some shared parameters within my txt file. As far as I know you cant chnage the name once its established witin Revit (unless theres a third party app). Would there be any issue withi this? Utimately I am pushing these parameters into new geometry and I would like them to better conform to a standard for a particular customer. I rennamed JUST the parameter name and it seemed to work ok.
I have no problem adding a shared parameter, but if I assign it the wrong type and it appears impossible to change it without adding a new parameter under a different name. I then deleted the old one, but Revit doesn't like that. They appear difficult to purge or delete without a hiccup relating to the original label the parameter was assigned to.
Example: I made a parameter for my clients occupied area (Footprint) and used the integer type by mistake. Apparently integers are only supposed to go up to 999. It refused to recognize the "Digital Grouping" so I had to convert over to the Area type.
If I try to change the type the field is grayed out.
When I go to Edit Shared Parameters and then the create button I get an error message "The Shared Parameter file was not saved successfully". I am stuck at this point and cannot go any further. What is causing the problem and how can I work around this. I am using Revit Architecture 2011.
I am making a nested family of windows and inserted the windows as shared and I need them as non shared. Is there a way to change the window from shared to non shared in the family editor?
I have a family, with three nested families: A, B and C.
Either A or B can be picked through a "Family Type" parameter. Family C is locked to a reference plane, which is defined by a dimensional parameter called "Offset." Is there a way to have the value of "Offset" change based on whether A or B is loaded? Not sure how to use the "Family Type" dorp-down parameter in/with a formula to do so.
I am creating a family for a mobile shelf assembly. While an obvious way to create it would be to use an array, because the client needs to be able to tag each shelf unit separately, that can't be done. The client does, however, have a limit of 10 banks maximum, so I've created ten banks in hte family that are controlled by visibility parameters.
Each of the banks can be a different type of shelf (the shelf units are nested families) but they are always of the same overall length and width in any one run.
Here's my problem, Everything flexes correctly as long as the depth of the units stays the same as they were when the family type parameters were assigned to the shelf families as labels. When you try to create a new Type using a wider shelf unit, you get errors.
Without the Family Type parameters assigned as labels, all of the reference planes meant to drive the location of the shelves flex correctly.
I am able to get the parameter to appear on the project information tab, but I cannot get the information to appear on the sheet. I would like to create a phase parameter on the sheet so that different projects under the same building will be specific to the project and not just the building.
I am using Revit 2013 and I am trying to create a text parameter for my windows that will tell you what grid is installed in the window according to which grids you choose (from my parameters above) I have included a picture to better show what I am trying to do. So far the parameters i have tried to use don't seem to work.
How to create a parameter field to include the MasterFormat data using 'txt' file similar to Assembly code parameter already built into revit families. I don't want to use the Keynote field for this purpose. I am looking for a ways to create a new parameter under the Identity Data.
How to create a 'No/Yes' or visibility parameter for a title block? I have my Architectural Seal as an image inserted into my title block family. I want to have that as a parameter for visibility so I can have it turned off until I am ready to print for final building department submission filing.
If possible, this would be a global adjustment so I would operate this parameter once and will affect all the sheets in the project instead of having two title block families and swapping those out at the time of filing.
Is possible create a URL project parameter associated for revision clouds?
I want to make a hyperlink into a revison cloud for a DOC file, but I not found the Revision Cloud category in Project Parameters/Parameter Properties dialog.
I search for this solution because I don't know the limit size of the parameter Comments. I wish add many comments on the project and these can have texts and images, so I choosed put comments in a DOC file.
Is there a way of importing cad by shared coordinates, or are autodesk working on this for the next service pack, which would be very useful.
It's great that the 'link cad' does it but why not import cad? This would be very useful as we model certain things (pipework statues,) from point cloud and model on other software, then we bring into revit, so we use the same coordinates as the point cloud (O.S coordinates.)
Also I'm glad that Autodesk have added the shared coordinates to the point cloud insert for Revit 2013.
I am a student working on a research project exploring the integration of LEED criteria with BIM software, and I am exploring the use of both Revit and Excel to accomplish this task. One major problem that I am running into though, is with Shared Parameters.
I have created a set of LEED-specific shared parameters in Revit. These parameters are things like "Plumbing Fixture Family," "Plumbing Fixture Type," "Ventilation Zone," "Refrigerant Use," etc... basically different parameters that will inform an Excel spreadsheet containing formulas to calculate, ultimately, the total points awarded for each LEED credit.
My problem, is that in Excel, the names of the values for these shared parameters need to be very specific in order for it to work with the formulas I have created. What I need from Revit is the ability to create a shared parameter with a drop-down menu containing a set number of options that can be applied to any component in a project, so this can be done early-on in Revit, rather than after-the-fact in Excel. Such as choosing the type of refrigerant used in HVAC&R equipment (and yes, you could just type the refrigerant type into a text parameter field, but if it's not typed exactly as it is in the pre-determined formula it is associated with in Excel, it will return an error in Excel, which is less than desirable - a drop down would reduce/eliminate the margin of error).
Is there any way to accomplish this task? From what I have found online, this is only slightly possible in Family Parameters - I haven't found anything about Shared Parameters.
We have centralized our content for our Revit users. We then customize the ini file to insure the paths look to the network locations.
One of my users has said that the proper and only recommended way to update the shared parameters file is while you are in Revit (I.E. have the path to the shared parameters file look to the network location instead of locally) so it updates on the fly. I didnt want to do that as I do not want to alter the "master" copy of the content we have on the network. I'd prefer that the user updates it locally, then we can just copy the file and overwrite the older file on the network.
I find nothing that says it is, but I prefer to explore all options and avenues first.
Looking at a standard door type, the Internal Concept Single Door, I've noticed that it has some parameters set as a Shared Parameter?
Where is the shared parameters file for this?
I'm setting up an office template for use of these, and losing the default functionality is not wanted, if necessary I'll integrate the defaults into my own shared parameters file.
We are working in our office on a central model. the model is stored on a local server within the office premises. We are three people working on it. our problem is this when we open the central file on any of our computer "create New local" check box is inactive. but when one of us login as "Administrator" and then open central file in any of the remaining two computer the " Create New Local" is active.why this is happening and is there any way we can work with the file without loging in as Administrator.
I've created a family that represents a poke-through with nested, shared families for different components. Everything visible in plan is made with Symbolic lines instead of Generic Annotations. The reasons being too numerous to explain here.
The problem I'm running into is that the family looks fine when the View Discipline is set to Architectural but when set to Electrical (1/8" scale in both) part of the shared components begin to get masked. I cannot figure out why they are behaving this way, except that some of the lines are creating some sort of masking area in the Electrical discipline. When the nested families are not shared the component looks fine in both disciplines. I've attached images and the family for you to try.
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
What is the data type for the second parameter of retrieve dimension method? Coz it's optional parameter.Retrieve(ViewOrSketch as Object, [DimensionToRetrieve]) as GeneralDimensionEnurator
We've tried to put the parameter name of the model as parameter but error had occured "DATA TYPE MISMATCH".Here's our
I have a set of sheet metal parts modeled in inventor that are produced in a wide range of sizes and several different sheet metal types.
The dimensions (length, width, flange size, etc) are driven from a spreadsheet. I would like to be able to have the user update the K Factor from the same spreadsheet by selecting a sheet metal type.
The sheet metal type and K factor are not listed in the parameters list with the other model dimensional data, so I'm not sure how to proceed.
I have been working on creating windows for the place I work. I want to make my windows so they are quick and easy to create new ones without having to add in new information like if the glass is tempered or if its an egress window. I would like to set up formulas for these. I am stuck at my egress window parameter. I have included an image of what I am working on and the calculations and formulas I have so far. I would like to have my egress check box to say yes if the Opening Width is greater then 20", the opening height is greater then 24" and the opening sf is greater then 5.7 Sf. How would I set this parameter up?
I've created an area schedule that divides my plan into seperate appartments. I would like to sort mu window schedule by this parameter- is there an option to link a window to a specific area, just like it's linked to floors?
How I can get the finished floor material from the floor in the room tag? The only way I know is to manually write material via Change Parameter Values in the tag.
Does the tooltips on Label Parameters can be modified? I would like to customize the tooltips on label parameters, which currently default to "Edit Parameter"...lame-oh; that tells the user very little. Perhaps the developers could add a customize tooltip control in the Edit Label dialogue box. Can the tooltips be accessed through the database?
