Why is the "User Define" Button grayed out under share/create video file/various HD selections and only the SD 720X480 max and lower available?
View 9 RepliesI downloaded a trial copy of the Corel VideoStudio Pro X5 Ultra. Every time I click on the Create Video File button the program crashes. I get a message that the program must exit. Every time I try this, it crashes.
View 4 Replies View RelatedI have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
is there a way to share "create final video" in 1024x768 mp4 h264?
because my source video is in 1024x768. i can create final video in 640x480 but quality is lower. and when i create final video in 1280x720 or in 1920 x 1080.(presets of MPEG-4 in videostudio x4), i always get black borders on sides and ALSO under and above.
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
I have been having trouble burning DVDs from VideoStudio X4 so I reinstalled and put in Service Pack 2. Still no luck. When I go to share and then pick out Make Disc/DVD the project loads but I cannot go on from there. The NEXT button is grayed out no matter what I do.
View 4 Replies View RelatedMy video won't share as a MPEG-4 HD. Here are the steps I take:
1. Click the "Share" Tab
2. Click "Create Video File"
3. Click "MPEG-4"
4. Click "MPEG-4 HD
5. Select the destination folder for the output
6. Click "Save".
The progress shows 0% and the progress bar goes away after fifteen seconds. I am sharing it as an MPEG-4 HD file because it will be placed on Youtube by someone else. I've probably done four of these projects the same way and they execute just fine.
Here's some more informtion:
Brand: Dell Laptop
HDD: 464GB; Used Space 153GB; Free Space 311GB
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
The video is a WMV2, 24 bits 1024 x768, 29.982 frames/second; Audio is windows media audio version 4, aspect ratio is 1.33 x 1.00. It is editable.
Here's how my timeline looks:
BLACK GRAPHIC = 2 SECONDS; TRANSITION (FADE TO BLACK) = 2 SECONDS; 10 SECOND CLIP; 3 SECOND CLIP; 00:42:33 CLIP.
I am using Video Studio X6 trial and the Screen Capture feature does not work.The capture window opens but the Capture Button is grayed out along with the Sound Source button.
I am running this on an XP SP3 system with -
4 GB memory
2.66 Ghz dual core processor
Is there any information available as to what requirements my system may not have? All other programmes run OK on the computer.
I have Pro X2 sotware. I have tried very unsuccsessfully to record onto a DVD disc from my video Share panel. I can get onto the template dialogue box, when I press next to record on the Disc, it goes to back, and will not go on to the next dialogue box.
I have plenty of memory and Ram. I use Windows 7. I can get onto Pro X2 ok and can download to create a video file, but I cannot create a disc.
I want to output an mpeg4 video with compression video type h264.main. When I look at General tab 1280x960 is not listed. The closest setting is 640x480.
The user defined button is not available (greyed out).
How to I output at 1280x960?
I have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies View RelatedI am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
I have 50 inch 1080p TV and a media player that can play almost any format. I have VideoStudio X3 and a decent core2 PC running XP. I have a few 1 hour each video files that I captured from my sony SD camcorder few years back using Firewire. These video files are like 25GB each and not high def.
Now I have edited some of these video files but I am not sure what is the best format to use when creating video file to watch it on my HDTV. I don't need to burn disks or re-edit the files once I am done editing one time.
I have tried custom MPEG2 with 8000 bit rate and 100% quality and it looks okay but grainy on my HDTV. I tried avchd/Blu-ray and they look much smoother on HDTV however they are a bit soft and dull in colors and not as sharp as custom mpeg2.
There are so many formats like DVD mpeg2/AVCHD/HDV/Blu-ray with mpeg2 or h.264 and videostudio help did not do a good job explaining them So I would hope experts here would guide me what best quality format should I pick for these SD videos so that they look nice on my HDTV. Would picking aspect ration to 16:9 make any difference for these sd video?
I am sure when I buy an HD camcorder I would have better options to keep picture quality great.
I just upgraded to the X4. I never had this problem with the X3. I use a hitachi camcorder and the clips it produces are mpeg. The settings I use on the X4 are the default settings. When I place the clips on the timeline, they show up as 16:9. When I press play, they are still in 16:9 format.
However, when I create a video file using option DVD 16:9, I get the following problem. While the clip is playing, it will start as 16:9 then change to 4:3 and then back to 16:9 again and so on.
Is there a setting that I'm supposed to change. This never happened with the X3.
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies View RelatedCS4 macbook pro
I can't seem to be able to emebd a tiff file.
All my clips are 1440 x 1080 but, for some reason, the Project Properties are 720 x 576.Don't see that as any problem providing I can select the higher quality settings when I go to create a Video File. And that's where the problem begins.If I go Share/Create Video File/Custom I can see the properties in the Save Options box are 720 x 576 and I can't change them.I've tried clicking on Options and looking under the Compression tab but my only options there are PAL DVD or NTSC DVD. I can't find any option that will let me get the file back to the original properties of 1440 x 1080.I'm NOT trying to create a DVD - just a high quality file that I can play back on my computer and on my HD TV.
View 8 Replies View RelatedI have some pairs of left and right videos that plays fine on 3D player that combine both files to 3D output. How do I edit the pair to one side by side video with videoStudio 5 pro?
View 3 Replies View RelatedWits end with VS X3 and X4.
I shoot with a Zi8 in 720p mode. I import the file (MOV) and work on it in VSP X4 - no problem. I see the preview window in full widescreen (no black bars). I have tried every possible option to get an FLV file out of X4 without the black bars and it's no use.
Here is a screen shot of my X4 preview, side-by-side with what I see on the web. [URL]
I also get the black bars when I view the FLV file on my desktop using Wimpy FLV player: [URL]
Nature of the problem: Following the recommended procedure, I get to the phase where you created a video file. However when I go to preview the file, its badly pixelated.
Properties of your source files: All are clips from unprotected DVDs and play fine when captured.
What devices are involved and their mode of connection: Direct from computer's DVD player/recorder.
Project Settings: As listed under recommended procedure.
Output format: Mpeg to be burned to DVD.
PAL or NTSC: NTSC
Error Codes (if any): None
System information: AMD 64 3500+ w/ Dual SLi 7800 GTs and 2 GB of RAM.
I suspect that its a setting somewhere that has been changed because on a prototype I made using some of the same clips it worked fine. Then just stopped and started pixelating out of the blue.
In VS X4 Create Video File there are several AVCHD settings.what the difference is between AVCHD 1440 x 1080P and AVCHD 1440 x 1080 ?With and without "P"?
View 4 Replies View RelatedI couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
I've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies View RelatedWhen first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
I created a custom shape using Photoshop CS6 extended using 64 bit I'm trying to define custom shape but it's grayed out, why?
View 1 Replies View RelatedI am trying to save a watermark as a brush but when I go to edit, define brush is greyed out.
View 1 Replies View RelatedI've purchased word art .png files and I'm trying to save them as brushes. When selecting Edit, the Define Brush Selection is grayed out.
View 3 Replies View RelatedI have a Sony HD Handycam that makes great HD movies. I do not make DVD's but rather put all my videos on a Western Digital media player which offers a very convenient way to both store & view them. After I select "share/create disc" & follow the menu creation instructions the final screen does not allow me to select the option to create an iso file. I can see the title of the file & the iso extension on the line but it is grayed out. I am running windows 7, 64 bit, 5GB ram.
View 12 Replies View RelatedIs there A away to Use the Camera Record button to Control the Recording and Pausing of the Captured Video within Corel?
View 3 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!