I couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
I just downloaded/installed Video Studio X4 Pro. Quite impressive. I've been using Roxio but too many problems so wanted to see if Corel is better. Have a minor problem that I haven't been able to solve. Background: I have 16 individual videos of foreign "soap operas" (all approx 3.7gb). All videos are either mpeg2 or avi. I copied all of them with no problem. Then, I wanted to eliminate some useless things at the beginning and end of each one. I went into a video editing program and trimmed approx 5 secs from the beginning and end of each video. After the trimming, I saved the videos to my hard drive in the My Videos folder in the Libraries. Then, because of some difficulties with Roxio, I decided to try Corel.
When I import a video, click on Tools, Create Disc, DVD, unmark Menu, then Burn, I always get the error telling me the total size is larger than the chosen project. This is what I don't understand. If the video, which is approx. 3.7gb,and I'm using a 4.7gb dvd, why am I getting this error? FYI: I went ahead and clicked on Yes, try to fit to disc, and after approximately 45 mins, it completed, ejected the disc and all I had was approx. 1/8" burn area. The properties of that disc showed it was a video.ts and when I clicked on it, the windows player opened and said can't be rendered. I don't under stand why X$ Pro says a 3.7gb video is over 7gb.
I'm using the free trial version of Videostudio X5 and have 3 video files I am trying to burn to a BD-R disk. The files are H.264 and when I preview it before burning, the menu I created works fine. One of the three files is large, over 9gb. When I burn the disk, the large video file is not burning correctly. When I go into that file from the menu, it just loops back to the first menu item. I tried burning just the large file to a BD-R and it worked fine. The total project size is around 17 gb so I'm under the 25 gb limit. I think the next thing I'll try is breaking the large video file into two files. I'd like to buy the software if I can get past this glitch.
View 7 Replies View Related(1) whether VS Pro X4 will support the 3D video clip taken from Panasonic HDC-SDT750 3D capable camcorder?
(2) If it is supported by VS Pro X4, how do you render or burn the 3D video file onto BD disc so that it would be recognised as a 3D video format disc and playable in a 3D Blu-ray player?
Not that it matters, I don't think, but I have been unable to burn an ISO file onto a usable DVD. In the Sharing module of VS Pro X6, after opting to burn a DVD, I select both "Create Folders" and "Create Disc Image." Both are created where I send them and I have no trouble creating usable DVDs by burning the folders onto a blank DVD after telling the Cyberlink burning software that I'm creating a video DVD. But I can't figure out a way to burn the ISO file disc image onto a DVD except as a data DVD, which, unsurprisingly, does not create a usable video DVD. (Cyberlink, at least, will not recognize the ISO file or the folder that it's in to burn a video DVD.) Is there a way within X6 to burn video DVDs from the saved ISO disc image (or from the saved folders for that matter) without re-rendering the video clips? (Also, while I'm asking, I take it that there is no difference between a DVD created from folders and the same content created from an ISO image. If this is right, why the two options?)
View 13 Replies View RelatedI thought I had read somewhere, before I purchased X4 Pro Ultimate, that BluRay could be burned to regular DVD if the files were small enough. Is that not true? Attempting to burn an 800MB file in BLuRay to a DVD+R yields an error message stating I need to use BD discs.
View 6 Replies View RelatedWhen the video file is saved and burn on DVD disc and play on a DVD player, only the images appear on the TV screen but there is no sound coming out from the speakers. I'm using Studio Pro X4
View 7 Replies View RelatedI have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
I downloaded yesterday the trial version of Corel X5 pro. The program looks great and I made a photo and videocompilation of 8 minutes with background music and slides. Here's the problem. When I want to burn DVD, the program starts, but after 10 minutes i see 99% on the 2nd level and the program jams. It happens everytime when I want to burn of make a video on my harddisk. I am seriously looking for a decent program where i can make nice photo and video slides, but Corel doesn't useful. I have Windows 7 Ultimate and my burner works fine. Only with Corel, like i written before it jams and then i have to quit the program.
View 3 Replies View RelatedWhen I get to the step where one edits the main and sub menus, I am only given the option to RETURN. The NEXT button is missing. This problem appeared after I was forced to re-install VSX2 following a computer crash. I am now running it on Windows 7 Home Premium.
View 2 Replies View RelatedI was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
I have used VideoStudio for many years. I am currently using VideoStudio Pro X2 and I am trying to burn a film I have just put together on a DVD. I have got to the Preview stage which works perfectly and then I am told to click on "Next" but all I am offered is a "Back" button. The instructions say that I should click on "Show more output options" but that is not there.
View 3 Replies View RelatedI am burning DVDs from an hour long project file in ProX5, of a two act opera. Act I burned fine, but Act II which is a separate project comes out on the DVD with the audio ahead of the video. I am making coasters, have quite a collection. I've never had this problem before with burning DVDs. I have burn speed set to 16x, not maximum. In the past I normally use the project rendered to a movie for the DVD burn, but with editing changes I keep making, it is faster to just burn directly from the project.
I am not using a separate audio file. The audio is embedded in the video.When I play the project and not the DVD, the audio and video are fine.
I need to burn video.... whenever i burn, it stop and appear unspecified error 5.0.0.
these are the spec:
PAL ( 25fps)
MPEG files
24bits, 720 * 576, 25 fps
Lower Field First
(dvd-pal), 4:3
video data rate: Variable ( Max 8000kbps)
LPCm Audio, 48000 Hz, stero
I have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies View RelatedI am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
I have 50 inch 1080p TV and a media player that can play almost any format. I have VideoStudio X3 and a decent core2 PC running XP. I have a few 1 hour each video files that I captured from my sony SD camcorder few years back using Firewire. These video files are like 25GB each and not high def.
Now I have edited some of these video files but I am not sure what is the best format to use when creating video file to watch it on my HDTV. I don't need to burn disks or re-edit the files once I am done editing one time.
I have tried custom MPEG2 with 8000 bit rate and 100% quality and it looks okay but grainy on my HDTV. I tried avchd/Blu-ray and they look much smoother on HDTV however they are a bit soft and dull in colors and not as sharp as custom mpeg2.
There are so many formats like DVD mpeg2/AVCHD/HDV/Blu-ray with mpeg2 or h.264 and videostudio help did not do a good job explaining them So I would hope experts here would guide me what best quality format should I pick for these SD videos so that they look nice on my HDTV. Would picking aspect ration to 16:9 make any difference for these sd video?
I am sure when I buy an HD camcorder I would have better options to keep picture quality great.
I just upgraded to the X4. I never had this problem with the X3. I use a hitachi camcorder and the clips it produces are mpeg. The settings I use on the X4 are the default settings. When I place the clips on the timeline, they show up as 16:9. When I press play, they are still in 16:9 format.
However, when I create a video file using option DVD 16:9, I get the following problem. While the clip is playing, it will start as 16:9 then change to 4:3 and then back to 16:9 again and so on.
Is there a setting that I'm supposed to change. This never happened with the X3.
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies View RelatedAll my clips are 1440 x 1080 but, for some reason, the Project Properties are 720 x 576.Don't see that as any problem providing I can select the higher quality settings when I go to create a Video File. And that's where the problem begins.If I go Share/Create Video File/Custom I can see the properties in the Save Options box are 720 x 576 and I can't change them.I've tried clicking on Options and looking under the Compression tab but my only options there are PAL DVD or NTSC DVD. I can't find any option that will let me get the file back to the original properties of 1440 x 1080.I'm NOT trying to create a DVD - just a high quality file that I can play back on my computer and on my HD TV.
View 8 Replies View RelatedI have some pairs of left and right videos that plays fine on 3D player that combine both files to 3D output. How do I edit the pair to one side by side video with videoStudio 5 pro?
View 3 Replies View RelatedWits end with VS X3 and X4.
I shoot with a Zi8 in 720p mode. I import the file (MOV) and work on it in VSP X4 - no problem. I see the preview window in full widescreen (no black bars). I have tried every possible option to get an FLV file out of X4 without the black bars and it's no use.
Here is a screen shot of my X4 preview, side-by-side with what I see on the web. [URL]
I also get the black bars when I view the FLV file on my desktop using Wimpy FLV player: [URL]
Nature of the problem: Following the recommended procedure, I get to the phase where you created a video file. However when I go to preview the file, its badly pixelated.
Properties of your source files: All are clips from unprotected DVDs and play fine when captured.
What devices are involved and their mode of connection: Direct from computer's DVD player/recorder.
Project Settings: As listed under recommended procedure.
Output format: Mpeg to be burned to DVD.
PAL or NTSC: NTSC
Error Codes (if any): None
System information: AMD 64 3500+ w/ Dual SLi 7800 GTs and 2 GB of RAM.
I suspect that its a setting somewhere that has been changed because on a prototype I made using some of the same clips it worked fine. Then just stopped and started pixelating out of the blue.
In VS X4 Create Video File there are several AVCHD settings.what the difference is between AVCHD 1440 x 1080P and AVCHD 1440 x 1080 ?With and without "P"?
View 4 Replies View RelatedI have an old video on cassette that I'm trying to capture to my computer to burn to dvd. It's fine on my t.v. being played in my vhs player. When I connect it to my computer using the program Video Studio Pro X5, I can capture, and everything is functioning fine, but the tracking is off in the preview section. I've captured, and played it back, and it captures like the preview. It's got the wave at the top, and a tiny bit of it on the bottom. How to adjust the tracking, like on old t.v.'s so that the picture is centered?
View 7 Replies View RelatedI've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies View RelatedWhen first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
I downloaded a trial copy of the Corel VideoStudio Pro X5 Ultra. Every time I click on the Create Video File button the program crashes. I get a message that the program must exit. Every time I try this, it crashes.
View 4 Replies View RelatedWhy is the "User Define" Button grayed out under share/create video file/various HD selections and only the SD 720X480 max and lower available?
View 9 Replies View Related
