I thought I had read somewhere, before I purchased X4 Pro Ultimate, that BluRay could be burned to regular DVD if the files were small enough. Is that not true? Attempting to burn an 800MB file in BLuRay to a DVD+R yields an error message stating I need to use BD discs.
View 6 RepliesNot that it matters, I don't think, but I have been unable to burn an ISO file onto a usable DVD. In the Sharing module of VS Pro X6, after opting to burn a DVD, I select both "Create Folders" and "Create Disc Image." Both are created where I send them and I have no trouble creating usable DVDs by burning the folders onto a blank DVD after telling the Cyberlink burning software that I'm creating a video DVD. But I can't figure out a way to burn the ISO file disc image onto a DVD except as a data DVD, which, unsurprisingly, does not create a usable video DVD. (Cyberlink, at least, will not recognize the ISO file or the folder that it's in to burn a video DVD.) Is there a way within X6 to burn video DVDs from the saved ISO disc image (or from the saved folders for that matter) without re-rendering the video clips? (Also, while I'm asking, I take it that there is no difference between a DVD created from folders and the same content created from an ISO image. If this is right, why the two options?)
View 13 Replies View RelatedI couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
When I get to the step where one edits the main and sub menus, I am only given the option to RETURN. The NEXT button is missing. This problem appeared after I was forced to re-install VSX2 following a computer crash. I am now running it on Windows 7 Home Premium.
View 2 Replies View RelatedI have used VideoStudio for many years. I am currently using VideoStudio Pro X2 and I am trying to burn a film I have just put together on a DVD. I have got to the Preview stage which works perfectly and then I am told to click on "Next" but all I am offered is a "Back" button. The instructions say that I should click on "Show more output options" but that is not there.
View 3 Replies View RelatedI just downloaded/installed Video Studio X4 Pro. Quite impressive. I've been using Roxio but too many problems so wanted to see if Corel is better. Have a minor problem that I haven't been able to solve. Background: I have 16 individual videos of foreign "soap operas" (all approx 3.7gb). All videos are either mpeg2 or avi. I copied all of them with no problem. Then, I wanted to eliminate some useless things at the beginning and end of each one. I went into a video editing program and trimmed approx 5 secs from the beginning and end of each video. After the trimming, I saved the videos to my hard drive in the My Videos folder in the Libraries. Then, because of some difficulties with Roxio, I decided to try Corel.
When I import a video, click on Tools, Create Disc, DVD, unmark Menu, then Burn, I always get the error telling me the total size is larger than the chosen project. This is what I don't understand. If the video, which is approx. 3.7gb,and I'm using a 4.7gb dvd, why am I getting this error? FYI: I went ahead and clicked on Yes, try to fit to disc, and after approximately 45 mins, it completed, ejected the disc and all I had was approx. 1/8" burn area. The properties of that disc showed it was a video.ts and when I clicked on it, the windows player opened and said can't be rendered. I don't under stand why X$ Pro says a 3.7gb video is over 7gb.
I have an mpg file which I am trying to burn to disc using VS4 but when it gets to 99% of the conversion it sticks and I get an unspecified error message and I cannot burn the file.
View 5 Replies View RelatedOn my trial version of ProX5, when I went to use the DVD label burn feature, I complete the label, when it asks me to save it I do with a file name but my new text and image aren't saved when I look at it again within the project and after I save the DVD label it shows as a .UPL file that Windows 7 does not recognize.
View 2 Replies View RelatedI seem to have inadvertently done something that has increased the time it takes to burn a DVD or ISO Image file from less than an hour to over 7 hours. I'm working on my first project, and have burned several discs along the way, and most burn in well under an hour. Then ... I must have changed something without understanding what it meant, and the time to burn has increased by around 10 X. Hardware acceleration for everything is On, and disabling it slows the process down even more.
The project is a video slide show with 994 photos, a music track ripped within VS5 from a CD to wav files. The project ends up just over 5 GB to burn to DVD. I tell it to let DVD Fit adjust the size down and it does reduce it to 4.38 GB.
Another thing I noticed, is that after letting it run to completion, instead of it taking up most of the DVD, the DVD is only half full even though I'd expect it to be almost full with 4.38 GB and it has been up until this problem started. And if I make an ISO Image instead, it is less than 2 GB in size instead of close to 4.38 GB. I'm wondering if some how I told it to do a massive job of compression?
FYI - I'm using the trial version of VS5, so it may not have SP 1 installed, and it appears that SP 1 cannot be installed on a trial version.
I'm using the free trial version of Videostudio X5 and have 3 video files I am trying to burn to a BD-R disk. The files are H.264 and when I preview it before burning, the menu I created works fine. One of the three files is large, over 9gb. When I burn the disk, the large video file is not burning correctly. When I go into that file from the menu, it just loops back to the first menu item. I tried burning just the large file to a BD-R and it worked fine. The total project size is around 17 gb so I'm under the 25 gb limit. I think the next thing I'll try is breaking the large video file into two files. I'd like to buy the software if I can get past this glitch.
View 7 Replies View Related(1) whether VS Pro X4 will support the 3D video clip taken from Panasonic HDC-SDT750 3D capable camcorder?
(2) If it is supported by VS Pro X4, how do you render or burn the 3D video file onto BD disc so that it would be recognised as a 3D video format disc and playable in a 3D Blu-ray player?
When the video file is saved and burn on DVD disc and play on a DVD player, only the images appear on the TV screen but there is no sound coming out from the speakers. I'm using Studio Pro X4
View 7 Replies View RelatedI have a new mini recorder which records 720x480 at 29.897 fps. Video studio says Unable to open file *****.avi for all of the files. They play perfectly well with MS media player, VCL, Quicktime etc so what is wrong ?
View 9 Replies View RelatedI opened a previously saved project and all the AVI files have blank spaces. When I click properties it says the file is unreadable. When I try to open the file it says unable to open file, catastrophic failure.
These are the same files that I used to edit and render a video a few months ago, and I was able to successfully open the same file in Windows Media Player. I am using VSX4 on a Windows 7 laptop. I'm not sure what updates are installed.
The video file is DV AVI file (720 x 480, 28854 kbps data rate, 298788 kbps total bitrate, and 29 FPS).
I have a windows 7, 64 bit quad core with 8 Gigs of ram, and 500 gigs of hard drive. I'm using the latest Video Studio Pro x5. After some time, and not always at the same time, it stops capturing, and says "unable to capture video because it is copy write protected". It's not copy write protected, and I cannot figure out how to get it to stop doing that.
I'm capturing an old VHS tape using an Easy Cap (the one that is new, and works). Apparently there are some old Easy caps that do not work.
After extensive editing I saved the result as an avi file. When I tried to open the newly created file I got the message:
File format mismatch. [1081.1.3]
I have many other video playback programs and, with the exception of Real Player, they all can play back this avi file I had just created with VS Pro X4. The Program GSpot finds no problems with the file.
Emails to Corel remain unanswered and telephone support held me waiting for hours, only to disconnect when it was their quitting time.
At the moment, the only file format that I can import on the edit tab is *.wmv. There should be no issue importing *.avi or *.mp4 or any other format for that matter, but it fails to open the files. I keep getting the same "unable to open the file 17101:7:1" error for seemingly no reason. Everyone says this software's functionality is wonderful, but if it won't even let you bring in normal files it's looking less and less useful all the time.
View 7 Replies View RelatedI'm using the TBYB version of X4. I have 39 video clips that were recorded on a new samsung standard def. vid cam. The native files are MP4 files. I transfered them from the SD card to my hard drive simply by dragging them over. They play fine in any version of VS.
I'm doing NOTHING fancy. No moving menus. No music on the menus. Just a main title page and enough menu pages to accommodate the 39 files. No audio normalization.
It NEVER gets to the point where it outputs to the DVD. As soon as it finishes whatever it's doing on file 39....whammo....unspecified error. It also takes 30+ minutes to render the file, never getting to the burning.
I have a 2.8ghz Quadcore CPU running Win7 64 bit Professional.
I tried this same procedure in X2. Burning completed successfully to the SAME blank DVD-RW and took approx 30 mins....so X2 on my system is faster.
Unfortunately, X2 is unusable for me with any video files OTHER than AVI files. Any other video files result in "skipping" audio as I've reported in another thread.
I've restared the project from scratch several times but to no avail. Is pointless to try X3 because it has the same audio problem for me that X2 has. My DirectX runtimes are from Oct. of 2010.
Does VS5 have the DVD burn program within it, not a separate program? I am using Corel DVD Movie Factory and also use ProX3. I prefer using my own template or rather my own jpegs for the background. Movie Factory forces me to use their templates, meaning I can't just have a jpeg in the background, have to use their gallery and I spend frustrating time moving off the template parts or hiding them, unless it's there in Movie Factory and I just didn't know how to not use something from the gallery.
View 5 Replies View RelatedI am unable to insert a MP4 file from a GO PRO HD camera into the timeline.
i get a " file format mismatch" error message
I have read several posts relating to VS10 & other versions, but not VS11+
i tried changing the file extension to .MPEG-4 but this did not work
file size is aprox 1.7Mb
VS11+
V 11.5.0157.2 Plus
Extra Content Pack
Power Pack
VS11 Patch Eng 122507-03
In VideoStudio X4 (SP1), I am trying to import an edited (VSX4) project into the library in order to use parts of it in a different project. This is something I have done successfully before but the last couple of times I have tried I get the message: “Unable to open file. File format mismatch”. (1081:1:3) There is no problem opening up the project in the normal way it is only when I try and import it into the library. I have compared the properties of these files with the successfully imported files and, to me, they look identical. They were all captured from video in the same way,
View 9 Replies View RelatedThis is driving me up the wall, I have pro X4 on my laptop and computer, I can't edit on my laptop as it lags, maybe Corel is too big for my laptop I don't know. On my laptop it allows me to import AVI. files, however, when it comes to my PC, it doesn't.It doesn't make sense how I CAN on my laptop but CAN'T on my pc, It did used to work fine on my pc when I had X2, but towards the end it started making the same error message
'Unable to open file [N:GFFILE309.AVI]. File mismatch'
I'm losing my temper, converting the files isn't an option as it makes my HD footage look like crap and pixilised, it also takes forever. I am at a dead end, I have installed the Corel Videostudio pro x4 codec and that hasn't worked at all.
With VS X4 I edited my .mts files into .vsp files. Then successfully created video files (.m2t 1440 x 1080 files) . I selected 1440 x 1080 because it is the setting set on my camcorder.
My question is in the Create disc step:
1. if I burn these .m2t files and select "DVD" would the resolution be back to that of .mpg in the final DVD?
2. If I burn these .m2t files and select "AVCHD" and instead of burning directly onto a disk, placed it on a hard drive folder. Then later could I burn it on a regular DVD disk? If that is the case, is the disk playable on a regular DVD player? Or, do I have to burn it on Blue Ray?
I know I could experiment it but my project has 4 Titles, each of about 30 min duration, that I want to burn. I tried to find the answer on the Forum and also in the Manual but could not find the answer there.
I just tried to burn a DVD for the first time on my new computer and it keeps getting to "output disc" and crashing. A Windows message pops up saying it had a problem and needs to close the program. Is this something with Windows 7? I've already updated my VS x2 and directX.
View 6 Replies View RelatedI want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies View RelatedI have a brand new machine with Iintel i7 windows 7 and 8mg ram, just bought VSX5 pro ultimate.
When I try to import "insert" audio file (mp3) I get back an error "file format mismatch" and so I am unable to insert it to the movie.
Circumstance: Using VSPX3, how to combine multiple VSP files in a single movie using "insert media file into timeline" command on File menu?
Each VSP file represents different segments of movie. Each VSP file has items on Overlay track, title track, Music track, as well as transitions.
Each VSP file can be loaded using "Open Project" command under File menu.
Problem: VSPX3 displays error message "Unable to open file" "file format mismatch" [16803:1:2]
On Windows 7 OS (64bit) getting the following error when attempting to burn a DVD: Unspecified error 5:0:0
I've attached a jpeg image containing the error.
Tried looking in the knowledgbase, but of course it's under construction. Tried contacting support, but of course the chat system is down. Then to add insult to injury, friggin Corel wants to charge me $15 to describe to them this burn error on their product. If I had known that this was the quality of product and level of support I was going to receive, I never would have purchased this product.
System info:
Box: Shuttle Inc SG45 V10
OS: Windows 7 Ultimate (x64) (build 7600)
CPU: 2.67 gigahertz Intel Core2 Quad Q9400
RAM: 8GB
Disc: 1.5TB (spread across 3 discs)
My Videostudio is in Chinese(I hate it but no choice in HK shops), so sometime is hard for me to understand how to do this and that!
I see some topic said I can try to make a ISO first instead of using the burn function, I try to output the project to a videso and a m2t file come out, I getting confuse now, how can I make the ISO file, by using the create video file? or create a disc? I have different project all put in one disc, if I burn the ISO, still have the menu?
I am trying to burn multiple copies of a video I have produced. In the final screen to create a disk there is an option to choose multiple copies. I always select multiple copies and it burns the first one perfectly, the burner drawer opens and it asks me to provide another disk. When I do so I get the error: "Does not support burning of DVD-Video on Empty disc. Supports burning on DVD-R/DVD-R DL/DVD-RW/DVD+R DL/DVD+RW disc. Please insert another disc to continue, or click Cancel to stop the process."
The disk burner is a ASUS BW-12D1S-U.
This is quite frustrating as I seem to have to cancel each time and ask it to generate another disc, which I suspect is a longer process then just making multiple copies.
I'm using video studio pro x3 and windows 7.
When trying to create a disc it opens dvd factory 2010 and does everything Ok but when I try to burn the project it gets about 95% through the burn process and fails. It seems like it is putting the files on but failing in the "writing lead out" phase. I've tried 3 different dvd burns to make sure that isn't the issue. I can create a file and then use nero to burn the disc fine but not when going through VS pro x3/DVD factory