I have used VideoStudio for many years. I am currently using VideoStudio Pro X2 and I am trying to burn a film I have just put together on a DVD. I have got to the Preview stage which works perfectly and then I am told to click on "Next" but all I am offered is a "Back" button. The instructions say that I should click on "Show more output options" but that is not there.
View 3 RepliesI'm trying to find a way of adding "film burn" or "light leak" effects (which give a faded, colour distorted, 70s look) to clips while editing in VSProX4. I'm working with SD avi clips, in a 4.3 aspect ratio (made with Mpeg Streamclip). find something like a "grunge" effects plug-in, compatible with VS ProX4, that is not too expensive.
My OS is windows vista, 32 bit with a 98G hard drive and 4G of ram (on Toshiba Satellite Intel duo laptop).
When I get to the step where one edits the main and sub menus, I am only given the option to RETURN. The NEXT button is missing. This problem appeared after I was forced to re-install VSX2 following a computer crash. I am now running it on Windows 7 Home Premium.
View 2 Replies View RelatedNot that it matters, I don't think, but I have been unable to burn an ISO file onto a usable DVD. In the Sharing module of VS Pro X6, after opting to burn a DVD, I select both "Create Folders" and "Create Disc Image." Both are created where I send them and I have no trouble creating usable DVDs by burning the folders onto a blank DVD after telling the Cyberlink burning software that I'm creating a video DVD. But I can't figure out a way to burn the ISO file disc image onto a DVD except as a data DVD, which, unsurprisingly, does not create a usable video DVD. (Cyberlink, at least, will not recognize the ISO file or the folder that it's in to burn a video DVD.) Is there a way within X6 to burn video DVDs from the saved ISO disc image (or from the saved folders for that matter) without re-rendering the video clips? (Also, while I'm asking, I take it that there is no difference between a DVD created from folders and the same content created from an ISO image. If this is right, why the two options?)
View 13 Replies View RelatedI thought I had read somewhere, before I purchased X4 Pro Ultimate, that BluRay could be burned to regular DVD if the files were small enough. Is that not true? Attempting to burn an 800MB file in BLuRay to a DVD+R yields an error message stating I need to use BD discs.
View 6 Replies View RelatedI couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
I have started my project with the Instant Project function (middle category) and I am trying to apply the Old Film filter effect to my project but I want most of the original colour to come through. Rather than have the whole thing sepia with scratches and dust, I would like it mostly colour but with scratches and dust etc.
I have clicked on the strip of film that I want to edit the filter on and clicked 'Customize Filter' in the options. From there I clicked 'Duotone' and edited the picture there to how much colour I would like to show through. The problem is, when I click 'Ok', the colour hasn't changed when I go back and replay it. It is still all sepia and not colour.
I have a problem with Pro X4. With Studio 11 Pro, I was able to view the film during saving to file but I cannot with X4. I can't find a solution in the user guide.
View 1 Replies View RelatedIs there any way to use the "old film" effect, but keep the original colors. I really enjoy the look of the scratches and dust, but I do not want a grey movie.
View 2 Replies View RelatedI have used Corel Video Studion for a number of years. I purchased VideoStudio Pro X4 some months ago and have no problem until now.Having edited a film into five segments. I have re-edited each segment with success until I got to the last one, having saved the earlier ones at each stage so only dealing with one at a time. On saving the last segment all went well until playback when I got the correct audio BUT the picture is now just a BLUE screen and nothing else. In desperation I delted the programme from the computer then reloaded, updated with service pack 1 and 2. Also, followed an on line recommendation to putin a new dll detail. Restarted the computer, downloaded the film and re-edited the final segment. It did seem to save quicker but AGAIN i have the correct audio BUT the same BLUE screen and for the life of me I do not know why.
View 4 Replies View RelatedWith Pro X4 I am unable to view a display on my film during saving to the file.
View 12 Replies View RelatedWhat does this icon indicate? See the attachment.
View 2 Replies View RelatedThe problem is that when I put a 2minute film in AVI format it works great, but I want to put a piece of it, so I use option to cut the film and I'm doing from it let's say 30s clip. The problem now begins, because when I play this clip in "Clip" option tagged I got the sound, when I change it to "Project" the sound vanishes... Using full film the sound is available in "Clip" mode and "Project" mode.
View 6 Replies View RelatedI have just received back a 15min 8mm movie from a film transfer company. They suggested for editing purposes that it has been transferred as a AVI file.
Having transferred the AVI file to my Video folder in Windows 7 i have tried to enter the file into Coral Video studio 12 by right clicking on the time line, this will not open the file for me to edit.
The file plays straight from the disc ok on the computer ok but does freezes intermittently. the file size is 3.36Gb
Any list of what the little symbols mean in the video clips? I stumbled (the usual method for finding anything out in Video Studio) upon somebody posting that twin icons that look like movie film mean that the clip has been through Smart Proxy. what all these cryptic symbols/icons/whatevers mean? I have the Picture Yourself book and the pamphlet that comes with VS4 and I can't find a simple page that explains these. How lame.
View 2 Replies View RelatedI got in on the big sale that NewBlue was having and I purchased the Film Effects pack (finally!). Everything is installed and registered.
There are actually 5 individual effects that you get with the Film Effects, they are:
Film Camera
Film Damage
Film Express
Film Look
Film Pro
I can successfully add each of these to a clip in my timeline and then modify the attributes, except one.
The Film Look plugin give me the error:
Corel Video Studio Pro
Invalid parameter
[15032:1:18]
It is a Corel error dialog, not a NewBlue error dialog. Only the Film Look plugin give me the error, the other 4 work just fine.
I have fully purchased and legally registered Corel Video Studio Pro and NewBlue Film Effects running on Windows 7 Ultimate 64 bit.
I'm using the TBYB version of X4. I have 39 video clips that were recorded on a new samsung standard def. vid cam. The native files are MP4 files. I transfered them from the SD card to my hard drive simply by dragging them over. They play fine in any version of VS.
I'm doing NOTHING fancy. No moving menus. No music on the menus. Just a main title page and enough menu pages to accommodate the 39 files. No audio normalization.
It NEVER gets to the point where it outputs to the DVD. As soon as it finishes whatever it's doing on file 39....whammo....unspecified error. It also takes 30+ minutes to render the file, never getting to the burning.
I have a 2.8ghz Quadcore CPU running Win7 64 bit Professional.
I tried this same procedure in X2. Burning completed successfully to the SAME blank DVD-RW and took approx 30 mins....so X2 on my system is faster.
Unfortunately, X2 is unusable for me with any video files OTHER than AVI files. Any other video files result in "skipping" audio as I've reported in another thread.
I've restared the project from scratch several times but to no avail. Is pointless to try X3 because it has the same audio problem for me that X2 has. My DirectX runtimes are from Oct. of 2010.
Does VS5 have the DVD burn program within it, not a separate program? I am using Corel DVD Movie Factory and also use ProX3. I prefer using my own template or rather my own jpegs for the background. Movie Factory forces me to use their templates, meaning I can't just have a jpeg in the background, have to use their gallery and I spend frustrating time moving off the template parts or hiding them, unless it's there in Movie Factory and I just didn't know how to not use something from the gallery.
View 5 Replies View RelatedI have created a short film using numerous clips. The footage is shot with a ratio of 16:9 and this is how it is viewed on my PC.
However if I export it to any format other than MPEG the first and last second of each clip stretches horizontally and then returns to the correct ratio (see images). I have tried every possible conversion with no luck. It is always the first and last second of a clip and happens for every clip in the film. The only time it doesn't happen is with the title templates.
With VS X4 I edited my .mts files into .vsp files. Then successfully created video files (.m2t 1440 x 1080 files) . I selected 1440 x 1080 because it is the setting set on my camcorder.
My question is in the Create disc step:
1. if I burn these .m2t files and select "DVD" would the resolution be back to that of .mpg in the final DVD?
2. If I burn these .m2t files and select "AVCHD" and instead of burning directly onto a disk, placed it on a hard drive folder. Then later could I burn it on a regular DVD disk? If that is the case, is the disk playable on a regular DVD player? Or, do I have to burn it on Blue Ray?
I know I could experiment it but my project has 4 Titles, each of about 30 min duration, that I want to burn. I tried to find the answer on the Forum and also in the Manual but could not find the answer there.
I just tried to burn a DVD for the first time on my new computer and it keeps getting to "output disc" and crashing. A Windows message pops up saying it had a problem and needs to close the program. Is this something with Windows 7? I've already updated my VS x2 and directX.
View 6 Replies View RelatedI want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies View Relatedthe spacebar does not work to stop and start film when the time code is flashing (hours, min, seconds, frames any).
View 1 Replies View RelatedOn Windows 7 OS (64bit) getting the following error when attempting to burn a DVD: Unspecified error 5:0:0
I've attached a jpeg image containing the error.
Tried looking in the knowledgbase, but of course it's under construction. Tried contacting support, but of course the chat system is down. Then to add insult to injury, friggin Corel wants to charge me $15 to describe to them this burn error on their product. If I had known that this was the quality of product and level of support I was going to receive, I never would have purchased this product.
System info:
Box: Shuttle Inc SG45 V10
OS: Windows 7 Ultimate (x64) (build 7600)
CPU: 2.67 gigahertz Intel Core2 Quad Q9400
RAM: 8GB
Disc: 1.5TB (spread across 3 discs)
My Videostudio is in Chinese(I hate it but no choice in HK shops), so sometime is hard for me to understand how to do this and that!
I see some topic said I can try to make a ISO first instead of using the burn function, I try to output the project to a videso and a m2t file come out, I getting confuse now, how can I make the ISO file, by using the create video file? or create a disc? I have different project all put in one disc, if I burn the ISO, still have the menu?
I am trying to burn multiple copies of a video I have produced. In the final screen to create a disk there is an option to choose multiple copies. I always select multiple copies and it burns the first one perfectly, the burner drawer opens and it asks me to provide another disk. When I do so I get the error: "Does not support burning of DVD-Video on Empty disc. Supports burning on DVD-R/DVD-R DL/DVD-RW/DVD+R DL/DVD+RW disc. Please insert another disc to continue, or click Cancel to stop the process."
The disk burner is a ASUS BW-12D1S-U.
This is quite frustrating as I seem to have to cancel each time and ask it to generate another disc, which I suspect is a longer process then just making multiple copies.
I'm using video studio pro x3 and windows 7.
When trying to create a disc it opens dvd factory 2010 and does everything Ok but when I try to burn the project it gets about 95% through the burn process and fails. It seems like it is putting the files on but failing in the "writing lead out" phase. I've tried 3 different dvd burns to make sure that isn't the issue. I can create a file and then use nero to burn the disc fine but not when going through VS pro x3/DVD factory
I've had nothing but problems with this latest project, finally got what looks decent and can't get past "preview" in the burn module. There's no "next" button, just "back."
Here's the details.
Operating system: Windows 7 Home Premium
VideoStudio Pro x2 - downloaded the patch
Project Properties:
NTSC
6.73 KB
37:31 minutes long
Still images are jpeg
videos are both MJPEG and Microsoft AVI (camcorder AND still digital)
Edit file format MPEG - should I try AVI?
Microsoft AVI files
24 bits, 704 x 480
frame-based
4:3
MJPEG Compressor - should this be something different?
PCM, 48,000 kHz 16 bit stereo
Image: Keep aspect ratio checked
apply anti-flickering checked
VS Pro X4 - I do not consider myself an expert with video editing/authoring, but I do have a fair amount of experience with capturing/editing/authoring h.264 files via a Hauppauge 1212 HD-PVR, ArcSoft Total Media Extreme, and VideoReDo. In fact, I have burned around 5,000 DVD and 2,000 AVCHD discs with outstanding results using those products, as well as editing and storing thousands more captured programs directly to HDD. Unfortunately, these products do not allow me to create Blu-ray discs, so that is why I am trying to switch over to VS X4.
My baseline for what I want from VS X4 is simply what I have been able to do with no effort at all using ArcSoft Total Media Extreme (supplied with the HD-PVR): I capture HD programing at 1280x720p 60fps using a variable bit rate (usually 7 Mbps) and AC3 audio, edit out unwanted material, add menu and chapters, then burn directly to an AVCHD disc. Using this method, I generally get a minimum of 3 hours HD material on a standard DVD5 blank, and total authoring/burning time for a disc is somewhere around 20 minutes.
My problem is that I have not been able to come anywhere close to this efficiency yet with VS X4. The .ts source files play and edit in VS X4 just fine, but then I hit a wall when I try to produce the output. There don't seem to be any default project profiles to create AVCHD 1280x720p, and even when I try to use Customize, i cannot access the needed fields, such as user defined frame size. And everything I have tried produces HUGE output files, 4 or 5 times larger than the source files!
Sample Source file MediaInfo:
ID : 0 (0x0)
Complete name : C:UsersPublicVideosInput for Edit or ResizeHoliday for Lovers 720p_7.1v.TS
Format : MPEG-TS
File size : 2.30 GiB
Duration : 1h 43mn
Overall bit rate mode : Variable
Overall bit rate : 3 166 Kbps
Maximum Overall bit rate : 18.0 Mbps
[Code] ...
I have created disc images of some projects. The 'share' option allows for making disc images but I can't see how to burn a disc from the image using VS X4.....the 'create disc' section does not seem to accept an image for burning.
View 3 Replies View RelatedI just downloaded/installed Video Studio X4 Pro. Quite impressive. I've been using Roxio but too many problems so wanted to see if Corel is better. Have a minor problem that I haven't been able to solve. Background: I have 16 individual videos of foreign "soap operas" (all approx 3.7gb). All videos are either mpeg2 or avi. I copied all of them with no problem. Then, I wanted to eliminate some useless things at the beginning and end of each one. I went into a video editing program and trimmed approx 5 secs from the beginning and end of each video. After the trimming, I saved the videos to my hard drive in the My Videos folder in the Libraries. Then, because of some difficulties with Roxio, I decided to try Corel.
When I import a video, click on Tools, Create Disc, DVD, unmark Menu, then Burn, I always get the error telling me the total size is larger than the chosen project. This is what I don't understand. If the video, which is approx. 3.7gb,and I'm using a 4.7gb dvd, why am I getting this error? FYI: I went ahead and clicked on Yes, try to fit to disc, and after approximately 45 mins, it completed, ejected the disc and all I had was approx. 1/8" burn area. The properties of that disc showed it was a video.ts and when I clicked on it, the windows player opened and said can't be rendered. I don't under stand why X$ Pro says a 3.7gb video is over 7gb.