VideoStudio :: Created Short Film Using Numerous Clips - Ratio Export
Sep 30, 2012
I have created a short film using numerous clips. The footage is shot with a ratio of 16:9 and this is how it is viewed on my PC.
However if I export it to any format other than MPEG the first and last second of each clip stretches horizontally and then returns to the correct ratio (see images). I have tried every possible conversion with no luck. It is always the first and last second of a clip and happens for every clip in the film. The only time it doesn't happen is with the title templates.
View 14 Replies
ADVERTISEMENT
Nov 30, 2011
I have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies
View Related
Mar 27, 2012
I'm trying to produce a 5 minute sports highlight video. It will be a mix of clips shot on my HDC-SD10 camcorder and clips pulled from a 1.5 hour game video on DVD. I am running Corel VideoStudio Pro X4.
Immediate challenge is importing clips from the game video on DVD. I don't want to download the entire game from the DVD just to pull 5 five-second clips. Unfortunately, entire game is one "chapter" on the DVD, so I can't just import a particular chapter. I've looked through the Corel manual, but can't find anything. How can I pull short clips from one long file?
View 2 Replies
View Related
Mar 3, 2011
What does this icon indicate? See the attachment.
View 2 Replies
View Related
Mar 26, 2012
Any list of what the little symbols mean in the video clips? I stumbled (the usual method for finding anything out in Video Studio) upon somebody posting that twin icons that look like movie film mean that the clip has been through Smart Proxy. what all these cryptic symbols/icons/whatevers mean? I have the Picture Yourself book and the pamphlet that comes with VS4 and I can't find a simple page that explains these. How lame.
View 2 Replies
View Related
May 9, 2013
I'm trying to find a way of adding "film burn" or "light leak" effects (which give a faded, colour distorted, 70s look) to clips while editing in VSProX4. I'm working with SD avi clips, in a 4.3 aspect ratio (made with Mpeg Streamclip). find something like a "grunge" effects plug-in, compatible with VS ProX4, that is not too expensive.
My OS is windows vista, 32 bit with a 98G hard drive and 4G of ram (on Toshiba Satellite Intel duo laptop).
View 2 Replies
View Related
Aug 29, 2012
My question is, does Videostudio X5 have the capabilities to either:
A) Batch convert while using one or more of the FX
B) Export multiple clips in one go from the timeline?
I have 120+ short video clips that I need to crop to a different size. I've figured out how to crop them to the size I need by using the "Croping" function in the FX. There seems to be no way however to apply this to all the clips at once in the Batch Convert.
The only way I can do it is to import all of the individual clips to the timeline and then export them individually...one at a time....taking a lot of my time. I notice they all retain their same file names in the timeline. Isn't there a way I can select all of them at once and export them with their individual file names all in one go (with any FX I've added)?
View 2 Replies
View Related
Feb 11, 2014
Capturing: I have a continuous miniDV tape that I am capturing, but Premiere keeps interrupting the capturing and makes short multiple clips...I have tried it with both Scene Detect ON and OFF. I just want the miniDV tape to play and to have one continuous file. How do I prevent the capturing process from splitting up the clip?
View 4 Replies
View Related
Feb 12, 2014
Exporting images in LR 5.3 with resize setting of "short edge" does not re-size the image at all when the option for "do not enlarge" is checked. Instead it simply exports the full sized image. This happens even if you are trying to downsize an image (in my case from a 24MP image to one that is 800px wide), in other words you are not enlarging the photos so the option for "do not enlarge" should not apply.
Other sizing options like "long edge" appear to work as expected.Have tried restarting LR but no effect. Have tried changing export setting and then changing back to "short edge", again no effect.
View 5 Replies
View Related
Feb 12, 2014
I have a friend who is just completing a film for a public screening...(about 400 people, mostly volunteers involved in production.)He will be using a regular projector hooked up to a PC to play the video.The source footage is 1080p HD shot on a HVX200. Edited on Premiere Pro CS5.
What format should he use to export so he gets great quality but it can also play without the computer stuttering and dying etc? We've debated between H.264 (mpeg 4 file format) or DVD Blu Ray.MPEG 2 (or some Quicktime format?)
Do we choose h.264 and bump up the bitrate to maximum? Stick with the preset recommendation? There also is h.'264 bluray'..have no idea what difference that makes.
We're not experts on codecs and resolutions etc.Premiere Pro presents this plethora of options.
We want to choose....File ...Export....a format and preset (and maybe adjust a setting or two) and get the best result.
View 2 Replies
View Related
Oct 3, 2012
I would like to export this to use as visual references for a client to see.
View 1 Replies
View Related
Jun 4, 2012
I'm using VSP X4 to make some short slideshows to be embedded in websites. I have been successful in creating them and converting into a WMV movie for broadband, 320 x 240 for fast loading on the website page.
All works well in terms of the slideshow presenting on the site page, but no matter how I size the container, or change the object code when converting, the slideshow always has a black bar at the top and the bottom of the slideshow. I've changed aspect ratios with no success in removing these black bars. I use CSS to create the container for the slideshow, and the container is coded for a white background, yet, the slideshow continues to have these black bars at the top and bottom. how I can remove these, assuming it's VSP4 that's creating them?
View 6 Replies
View Related
Jun 4, 2013
I've just upgraded to X6.
My first project is just 2m 3secs long. The top video track has 2m 28secs of video, and the a still photo in place for 3 seconds.
However the orange timeline stop before the final clip (still photo) so when I render/share the project this last slide isn't included.
how I can change the project duration?
View 6 Replies
View Related
Jun 19, 2013
I've a nwe camera Canon 5D Mark III and I've some problems with these file.
When I edit in Corel Video Studio X6 all videos play in the preview screen bad because It have some short pauses.
The videos do not work in a continuous way.
I bought more RAM and now I've 12gb. Also I work with other HD files, like GoPro Videos, and I dont have problems in the preview. Maybe the container of 5D Mark III videos?
View 4 Replies
View Related
May 10, 2011
I have started my project with the Instant Project function (middle category) and I am trying to apply the Old Film filter effect to my project but I want most of the original colour to come through. Rather than have the whole thing sepia with scratches and dust, I would like it mostly colour but with scratches and dust etc.
I have clicked on the strip of film that I want to edit the filter on and clicked 'Customize Filter' in the options. From there I clicked 'Duotone' and edited the picture there to how much colour I would like to show through. The problem is, when I click 'Ok', the colour hasn't changed when I go back and replay it. It is still all sepia and not colour.
View 4 Replies
View Related
Jul 12, 2011
I have a problem with Pro X4. With Studio 11 Pro, I was able to view the film during saving to file but I cannot with X4. I can't find a solution in the user guide.
View 1 Replies
View Related
Nov 30, 2012
I have used VideoStudio for many years. I am currently using VideoStudio Pro X2 and I am trying to burn a film I have just put together on a DVD. I have got to the Preview stage which works perfectly and then I am told to click on "Next" but all I am offered is a "Back" button. The instructions say that I should click on "Show more output options" but that is not there.
View 3 Replies
View Related
Mar 3, 2012
Is there any way to use the "old film" effect, but keep the original colors. I really enjoy the look of the scratches and dust, but I do not want a grey movie.
View 2 Replies
View Related
Jan 22, 2012
I have used Corel Video Studion for a number of years. I purchased VideoStudio Pro X4 some months ago and have no problem until now.Having edited a film into five segments. I have re-edited each segment with success until I got to the last one, having saved the earlier ones at each stage so only dealing with one at a time. On saving the last segment all went well until playback when I got the correct audio BUT the picture is now just a BLUE screen and nothing else. In desperation I delted the programme from the computer then reloaded, updated with service pack 1 and 2. Also, followed an on line recommendation to putin a new dll detail. Restarted the computer, downloaded the film and re-edited the final segment. It did seem to save quicker but AGAIN i have the correct audio BUT the same BLUE screen and for the life of me I do not know why.
View 4 Replies
View Related
Jul 12, 2011
With Pro X4 I am unable to view a display on my film during saving to the file.
View 12 Replies
View Related
Jun 26, 2011
The problem is that when I put a 2minute film in AVI format it works great, but I want to put a piece of it, so I use option to cut the film and I'm doing from it let's say 30s clip. The problem now begins, because when I play this clip in "Clip" option tagged I got the sound, when I change it to "Project" the sound vanishes... Using full film the sound is available in "Clip" mode and "Project" mode.
View 6 Replies
View Related
Jan 31, 2013
I have just received back a 15min 8mm movie from a film transfer company. They suggested for editing purposes that it has been transferred as a AVI file.
Having transferred the AVI file to my Video folder in Windows 7 i have tried to enter the file into Coral Video studio 12 by right clicking on the time line, this will not open the file for me to edit.
The file plays straight from the disc ok on the computer ok but does freezes intermittently. the file size is 3.36Gb
View 8 Replies
View Related
Sep 3, 2012
I got in on the big sale that NewBlue was having and I purchased the Film Effects pack (finally!). Everything is installed and registered.
There are actually 5 individual effects that you get with the Film Effects, they are:
Film Camera
Film Damage
Film Express
Film Look
Film Pro
I can successfully add each of these to a clip in my timeline and then modify the attributes, except one.
The Film Look plugin give me the error:
Corel Video Studio Pro
Invalid parameter
[15032:1:18]
It is a Corel error dialog, not a NewBlue error dialog. Only the Film Look plugin give me the error, the other 4 work just fine.
I have fully purchased and legally registered Corel Video Studio Pro and NewBlue Film Effects running on Windows 7 Ultimate 64 bit.
View 3 Replies
View Related
Oct 15, 2013
In version 5.2 for Mac i'm seeing Export -> Long Edge / Short Edge giving the wrong result... they seem to be inversed... I.e. defining a long edge seems to result in an exported image with that length as the short edge.
View 1 Replies
View Related
Mar 29, 2011
the spacebar does not work to stop and start film when the time code is flashing (hours, min, seconds, frames any).
View 1 Replies
View Related
Jul 11, 2011
I am currently using a trial version of VS X4 (testing if suitable for our needs) and I am using an instant project that I downloaded in the extras. It was one large picture and then 4 pictures scrolling on the left hand side. I modified it so that I had a background on the main video track, the one large picture a mp4 video captured with Camtasia Studio 7, and three pictures scrolling on the left hand side.
I want to have a 4:3 aspect ratio, as these would be going on a website and need to match previous tutorial videos. The video I put in the overlay track is captured at 1024 x 768 and I have tried a variety of sizes of the back ground, (matching aspect ratio and not) and I cannot seem to find or create a suitable template to create a good quality (I.e. can still read the menus in the window of the screen capture mp4) video. I don't much care what the output type is, as long as it is supported by Camtasia Studio 7 since I render there to create a HTML script, to be used on the website.
View 2 Replies
View Related
Feb 23, 2013
When editing DV from my old mini dv camcorder, how can I get the final edit to fill the screen without the black side bars after puting on to a dvd and playing back on a 1080x1920 tv. does VS pro x4 have a setting to eliminate the black bars?
View 4 Replies
View Related
Oct 8, 2010
I am using VS Pro X3.
I have a .mov file in 16:9 ratio. I need to add a picture to the front of the movie so that this image appears in the player I am using when the movie is loaded and ready to play.
EVERY time I try to create the new movie, the movie aspect is reformatted and I get black bars across the top and bottom of my movie. I have been everything I can find in the program - using custom formats and defining the exact dimensions. I must have tried this over a dozen times looking for something stupid that I am missing but I can not figure this out.
The original file is quicktime (.mov) 960X540. If I play this file in my player (its a flash player) it plays clean in the 16:9 aspect with no black borders. I do not care whether the file is .mov, mp4, or flv. The player supports all of these (and a few more common types). This will be web hosted so I am concerned about file size. Step one for me is to get VS to create a movie file in the appropriate aspect ratio without black bars!!!
View 1 Replies
View Related
Oct 21, 2010
I was using Premiere Elements 2.0. I have an issue on exporting my video to YouTube via MP4: I can't seem to change the compression ratio, it seems fixed at 128k. This lousy ratio is causing compression artifacts given that the source audio has a low level hiss.
How can I improve the compression?
View 3 Replies
View Related
Oct 13, 2010
I have added some photos using the option "keep aspect ratio". However, when the project has been rendered to 16:9 it has stretched the photos. How can I force X2 to "keep aspect ratio"?
View 2 Replies
View Related
Jul 3, 2012
I'm having a problem with VideoStudio where it is not correctly detecting the aspect ratio of the video.
The video was created by HandBrake by converting a DVD to an MP4. VLC Player correctly detects the aspect ratio and displays it fine. VS doesn't.
In VS the video is coming up as 4:3 and so when played, it has black pillars on either side.
How can I get VS to interpret the aspect ratio correctly, or even override it?
The video files details (MediaInfo):
General
Complete name : C:TempHandbrakeVts 01 1-2.mp4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 230 MiB
Duration : 35mn 54s
Overall bit rate mode : Variable
[Code] .....
View 2 Replies
View Related
