I've just upgraded to X6.
My first project is just 2m 3secs long. The top video track has 2m 28secs of video, and the a still photo in place for 3 seconds.
However the orange timeline stop before the final clip (still photo) so when I render/share the project this last slide isn't included.
how I can change the project duration?
I have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies View RelatedWhat does an orange line between the timeline and the chapter / cue marker line indicate. (see picture below).
I am halfway through a project and suddenly notice this orange line that wasn't there before. I've looked through the documentation and see no mention of its meaning, and what I did that triggered it to show up.
On the edit screen, the orange strip, which I assume means content, stops at approximately 7:31 on my timeline. All vide I have added stops here on my preview. I cant get past it.
View 1 Replies View RelatedI'm using VSP X4 to make some short slideshows to be embedded in websites. I have been successful in creating them and converting into a WMV movie for broadband, 320 x 240 for fast loading on the website page.
All works well in terms of the slideshow presenting on the site page, but no matter how I size the container, or change the object code when converting, the slideshow always has a black bar at the top and the bottom of the slideshow. I've changed aspect ratios with no success in removing these black bars. I use CSS to create the container for the slideshow, and the container is coded for a white background, yet, the slideshow continues to have these black bars at the top and bottom. how I can remove these, assuming it's VSP4 that's creating them?
I'm trying to produce a 5 minute sports highlight video. It will be a mix of clips shot on my HDC-SD10 camcorder and clips pulled from a 1.5 hour game video on DVD. I am running Corel VideoStudio Pro X4.
Immediate challenge is importing clips from the game video on DVD. I don't want to download the entire game from the DVD just to pull 5 five-second clips. Unfortunately, entire game is one "chapter" on the DVD, so I can't just import a particular chapter. I've looked through the Corel manual, but can't find anything. How can I pull short clips from one long file?
I've a nwe camera Canon 5D Mark III and I've some problems with these file.
When I edit in Corel Video Studio X6 all videos play in the preview screen bad because It have some short pauses.
The videos do not work in a continuous way.
I bought more RAM and now I've 12gb. Also I work with other HD files, like GoPro Videos, and I dont have problems in the preview. Maybe the container of 5D Mark III videos?
I have created a short film using numerous clips. The footage is shot with a ratio of 16:9 and this is how it is viewed on my PC.
However if I export it to any format other than MPEG the first and last second of each clip stretches horizontally and then returns to the correct ratio (see images). I have tried every possible conversion with no luck. It is always the first and last second of a clip and happens for every clip in the film. The only time it doesn't happen is with the title templates.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
My computer is running windows 7, 64 bit, and im running no plugins.
View 3 Replies View RelatedI’d like to get some info about estimating time needed for a project. Nothing too exact is needed.
View 7 Replies View RelatedI lost an edit I was working on and Time Machine has complete backups for the past several days. I can see and find the backup copy in Time Machine in /usr/discreet/project/ . I can extract it from Time Machine. But how can I make Smoke aware of it and open it?
I tried a few things like I have an existing project called "/usr/discreet/project/Project1", I removed it and put my backup in the same place with the same name, but that doesn't work either.
Created a project for a client, saved it, and rendered out a preview. Today I open the same project which has not been touched since the render and it's a completely different image result.Left is in the project as of today. Right is same frame from render yesterday. As I said, no project changes have occurred since render.
I've messed around with the blending modes and opacity settings which are still as I left them originally, keyframes and all, yet I cannot get back to the exact same image on the right. Having funky oddities in AE CC?
each time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt
I have bought an Easycap capture device and it is installed properly. However when I try to capture video from VHS I get the message "The sample start time is after the sample end time"
View 4 Replies View RelatedI have encountered a problem with the video time line panel in CC.
When importing a clip, the time line panel remains on top of the video image window.
As before, the image window does not automatically resize to float above the time line panel.
I cannot resize the clip image panel to make more room for the time line.
I have tried to reset Photo Shop to the original state without success.
How can I select more than one line at a time? Until recently every line I selected would stay selected, now for some reason, I can only select one line at a time. If I select a line say to delete it, and then a second the first de-selects and only the last line selected will delete.
View 6 Replies View RelatedWould like to know if Autocad has any thing that i could use to break multiple line at one time with out going to each line and using the break command. Using Autocad 13.
View 3 Replies View RelatedHow can I project a right of way line into a cross section.
View 1 Replies View RelatedI have a very simple 'Metric Generic Model line based' family that contains 1 rectangular extrusion.
My Problem: Revit wont allow me to place a FamilyInstance of this family inside a (Architectural) project. When I click Architecture Tab->Component->Place a Component and select my Family I get a circle with a cross in it and are not able to place my family instance anywhere. Note this occurs in all levels/views from Site to Level 1, 2 etc.
why I can place it in a project?
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
Certainly couldn't open an X3 in X4. If I wanted to edit/burn my X4 in the "faster" X5, why should I essentially start from scratch to take advantage of X5?
Project would be SAVED as an X5 project file, of course.
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
I'm green with Videostudio as i use pinnacle before.
The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!
I recently upgraded to x6. My question is, there were some hd project templates that came with x3 that id like to use with x6. How to do this, or import or find the files?
View 5 Replies View RelatedI want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies View RelatedI finished the DVD, looks great, now I want to make another DVD the next day. How do I recover the project? In VSX3 made it really easly to recover DVD projects with all the menus, chapters and any other setting. Where does VSX4 save the finish project at?
View 2 Replies View RelatedI have VideoStudio X4 pro, think the sales man did a great job as i'm a beginner and man o man this isn't what i thought it woud be I'm trying to save my pictures to cd, it burns in and when i go to play it on the video, it won't work, just comes up black? Have slected create disk image, have used the cd-r before to do a similar thing and it won't work.
View 3 Replies View Related