VideoStudio :: Batch Convert With FX / Export Multiple Clips From Timeline
Aug 29, 2012
My question is, does Videostudio X5 have the capabilities to either:
A) Batch convert while using one or more of the FX
B) Export multiple clips in one go from the timeline?
I have 120+ short video clips that I need to crop to a different size. I've figured out how to crop them to the size I need by using the "Croping" function in the FX. There seems to be no way however to apply this to all the clips at once in the Batch Convert.
The only way I can do it is to import all of the individual clips to the timeline and then export them individually...one at a time....taking a lot of my time. I notice they all retain their same file names in the timeline. Isn't there a way I can select all of them at once and export them with their individual file names all in one go (with any FX I've added)?
View 2 Replies
ADVERTISEMENT
Sep 8, 2013
Just upgraded to X6 last week to start to edit a short movie that I am working with my students. Since is our first short with a lot of takes (about 74 takes in 7 scenes) and we had a lot of problems shooting because take more time them we thought! Well, now I am editing it but I need to export the edited clips (takes) in the time line to add special effects in HitFilm, so theres a way to export all those clips as MP4 or any format in a batch?
View 5 Replies
View Related
Dec 24, 2012
I'm trying to drag multiple clip from timeline into desktop or library but all the clips always got spliced into a single clip. How to keep them as separated clips ? or individual clips ?
View 2 Replies
View Related
Mar 3, 2011
What does this icon indicate? See the attachment.
View 2 Replies
View Related
Mar 15, 2012
I'm working on a lengthy video highlights project with many clips less than 5 seconds and want to know the easiest way to bulk move at least 10+ clips at a time on the timeline to either an earlier or later point than they're currently at. In essence, I'm hoping that I can "bulk" cut and paste all these clips together instead of doing it one clip at a time by either dragging each individual clip or cutting and pasting.
View 5 Replies
View Related
Feb 3, 2013
is it possible to show thumbnails of a clip in the timeline like this one?
View 2 Replies
View Related
Jun 8, 2013
I am using X6. When I tried to launch a music track from "Smartsound", (from the owned section) the "Add to Timeline" was greyed out.
I Split the Audio from the video and it landed in the VoiceOver track. Is it possible to make it land in one of the music tracks?
Is it possible to alter the volume across all the clips on the timeline without having to alter each clip separately?
View 3 Replies
View Related
Dec 28, 2011
I have recently upgraded from VS11 to Pro X3. However when attempting to play clips in timeline, X3 crashes.Playing 'project' works fine.
OS is Vista.
View 8 Replies
View Related
May 22, 2012
How to identify clips in the media library that are inserted in the timeline. There is no "tick" mark to tell us
View 7 Replies
View Related
Jan 30, 2013
I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies
View Related
Feb 13, 2014
It's listed as a feature numerous times in the forums but I haven't been able to export cut down stock footage as individual clips.
View 3 Replies
View Related
Aug 27, 2010
Is there any way to export the entire trax layer with multiple clips as an MA file? I need to swap out a character rig with a new one currently I am able to do this with single clips, but if i have a bunch of clips sequenced on the time line id like to do them all at once if possible?
View 1 Replies
View Related
Nov 3, 2013
First time creating a project and capturing digital (.mts) clips from digital media. I used to have a MiniDV camera which I found easy to 'capture' from.I recorded to SDHC memory card which I then copied (all folders and files) to a hard drive.I am using VS X6.
Method I used -Click on CAPTURE > IMPORT FROM DIGITAL MEDIA / Navigate to the folder where all the digital video clips are (PRIVATE/AVCHD/BDMV/STREAMClick START It takes a very long time for all video clips to be 'read' and 'thumbnails' displayed.
Now comes the problem.I want to select the FIRST 100 clips.I note that to select as clip to import I need to click the top left corner of a clip (and a tick appears) BUT I don't want to have to click on 900 thumbnails.I tried clicking on the first thumbnail then holding down the SHIFT key then clicking on the last thumbnail - didn't work.Tried the same holding down the CTRL key - didn't work.
View 12 Replies
View Related
Jun 14, 2011
I have a project with multiple images dropped on an overlay track. After I've placed them all, I'd like to apply the same fade out effect to all of them at once. I've tried shift/click and crtl/click to select more than one, but it doesn't work.
VSX4
View 2 Replies
View Related
Jun 8, 2011
In XDP7 is there a way to batch covert .xar files to .svg? Is there a plugin maybe?
View 9 Replies
View Related
Aug 21, 2011
I have a project with dozens of clips. Is there any way to mute or split audio for all or multiple clips rather than doing it for one clip at a time?
View 2 Replies
View Related
Apr 13, 2012
Is it possible to export a part of the timeline to a new video file?
So if I have a 10 min video in the timeline, I would like to "mark in" and "mark out" from 3m02s to 5m30s, and create a new file.
I used to use Edius I could mark in and mark out from time to time and export to a new video file. Is there a workaround in Videostudio ?
I'm editing a training video, and would like to export different "chapters" to seperate video files, so I can upload the seperate videos to the web, and not have to export the entire video, as this would be too big.
View 2 Replies
View Related
Sep 30, 2012
I have created a short film using numerous clips. The footage is shot with a ratio of 16:9 and this is how it is viewed on my PC.
However if I export it to any format other than MPEG the first and last second of each clip stretches horizontally and then returns to the correct ratio (see images). I have tried every possible conversion with no luck. It is always the first and last second of a clip and happens for every clip in the film. The only time it doesn't happen is with the title templates.
View 14 Replies
View Related
Sep 29, 2010
I am using VS Pro X2. There is a problem with batch conversion. When I export the videos individually using "share", I get a good quality output, but when I export the same video using "batch convert", the quality degrades, for example the title gets blurry. I am using the exact same output setting in both situations:
MPEG-4 Files
24 bits, 640 x 480, 30 fps
Frame-based
MPEG-4 SP Video: 2000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
View 5 Replies
View Related
Dec 21, 2010
I recently tried to convert a 76 minute movie in mpeg 4 to mpeg 2 using the batch convert function. I first went into options and set the bit rate to 6100 kbps and the audio to Dolby 2 ch. stereo, with the bit rate set to constant. After the conversion had taken place, I found the results were excellent, except that only 38 minutes were converted. I tried it again, but still only 38 minutes and then it it finishes. Why won't it convert the full 76 minutes? The destination folder is on my "D" drive which is 1 TB, so there is lots of room.
View 3 Replies
View Related
Oct 5, 2012
the batch conversion tool can't handle long file names as generated by the Windows Live Photo Gallery import tool. I was shocked (dismayed?) to see that my brand new X5 doesn't import DV as nicely as this free MS tool (as an aside). Here is an example filename: "Tape05 2001-01-02 14.05.33.avi". It stumbles on the first '.' it finds. Luckily it does not overwrite files that end up having the same name because of this truncation but still. Come on now. Path manipulation is junior engineer programming 101.
The batch convert also does not remember the target directory last used. At least default it to the source directory, right?Unlikely to be fixed, I know, but maybe it'll go on the list for X6.
View 1 Replies
View Related
Mar 31, 2012
I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)
The files and settings are the same. The only difference is using batch convert or not.
This happens to Video Studio Pro X3 and X5.
View 12 Replies
View Related
Feb 25, 2013
How do you select Multiple clips in a long sequence with many clips? I am cutting a short documentary and I need to move around a large quantity of clips. How do I quickly select a bunch of clips?
View 2 Replies
View Related
Dec 9, 2013
I'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies
View Related
Apr 17, 2014
Nothing happens when I try to move the clips to the timeline. Have Windows 8.1. Premiere Pro CC.
View 3 Replies
View Related
Aug 29, 2012
I've just watched an Adobe TV video by Julianne Kost about video features in PS CS6.At one point she converts a video clip into a Smart Object in order to apply a PS filter, but when I do this, the entire Filters menu is grayed out.
The mp4 clip plays normally in the Timeline otherwise.
View 3 Replies
View Related
Oct 30, 2012
I have got some questions:
1. How can I select many clips on the timeline? (I work with a Wacom tablet.) When I press the pen onto the tablet and move it, I can only pull the gap. In connect fx it works, when I hold cmd.
2. If I set markers in the timeline, is there a way to also see them in connect fx?
3.There is a function in Final Cut: When I I select a clip from the timeline and press "f" , I can go on working on its source clip in the viewer. Is there something similar in smoke? I cannot find the name for this function, so I cannot search for it in the keyboard shortcuts.
4. If I render something, is there a way that Smoke automatically copies the file (without copying the effects)? The reason for that question is: I applied timewarp to a clip, then I wanted to go on working on the clip in connect fx, but the length of the clip changed - it was shorter. When I went on working in action and put some lense flares and rendered it, everything was bended and looked weird. It looked great but I did not intend to do something like this.
The next questions are no real questions but rather problems.
5. When I work with audio (audio clip locked), I cannot really cut on the music, because 5a. sometimes the amplitudes do not match the music. An example: There is no amplitude, but the music goes on for 2 seconds. 5b. And when it is correct and I cut on the beat and render it, it is not sync anymore some moments later or when I restart smoke. (It only displaces 1 or 2 seconds from the sync.)
6. Since I have updated from pre-release 4 to pre-release 5, I cannot export anymore. I have read a lot on blogs, but I could not really find my problem. I cannot even press the export button.
View 9 Replies
View Related
Feb 24, 2012
I was wondering if when I stop a looping clip playing in my timeline, I could have it stop at the frame I stop on instead of stopping at the positioner or in-point. This is a very vital problem I'm having.
I have come up with a work-a-round but it doesn't work near as smoothly as I would like it to.
All I do for the workaround is instead of hitting space when I stop, I hit right alt to set an in point then hit space to stop and "A" to move to my newly created in-point. But it doesn't work as smoothly as it should. I would really like it to perform like playing a clip in the desktop works. It just loops around and when I stop, it actually stops.
View 2 Replies
View Related
May 1, 2013
I'm coming from a Symphony and FCP background. I do a lot of keying in the timeline when I'm finishing, so I'm often moving the green screen clip from track 1 to 2 and then putting the BG on the lower track. I'm used to being able to constrain the movement of the clip so that it doesn't slide around on the timeline and get out of sync when I move it. Does smoke have a hotkey for this? I've noticed if I hold shift, I get some indication of where Smoke is lining up the clip relative to other clips by some highlighting, but this does not constrain the clip I'm moving.
View 9 Replies
View Related
Dec 16, 2013
I can;t drag slected clip from the source monitor to the timeline.. it allows me to take audio but video won;t travel with it.. even if I just grab the video only icon.. it won't do it... i am using PP CC
View 3 Replies
View Related
Dec 1, 2013
I am having an issue with Premiere 6.0 that I can't seem to solve. Some audio clips are showing up in red in the timeline and they just don't work at all. Here is how this went down.
I had to format my computer due to Windows related troubles and so I reinstalled the OS, installed all of my Adobe software and dropped the files back into their original locations. When I fired up premiere and opened the project, everything was looking fine and dandy until certain clips showed up in red and just didn't work.The only clips that were affected were audio tracks from AVI files that I separated from the video. They are not missing , premiere knows where they are and if I drag one into the timeline it will work just fine.
View 6 Replies
View Related
