VideoStudio :: Icon On Film Clips In Timeline?
Mar 3, 2011What does this icon indicate? See the attachment.
View 2 Replies
ADVERTISEMENT
VideoStudio :: Icons / Symbols In Film Clips?
Mar 26, 2012Any list of what the little symbols mean in the video clips? I stumbled (the usual method for finding anything out in Video Studio) upon somebody posting that twin icons that look like movie film mean that the clip has been through Smart Proxy. what all these cryptic symbols/icons/whatevers mean? I have the Picture Yourself book and the pamphlet that comes with VS4 and I can't find a simple page that explains these. How lame.
View 2 Replies View RelatedVideoStudio :: Created Short Film Using Numerous Clips - Ratio Export
Sep 30, 2012I have created a short film using numerous clips. The footage is shot with a ratio of 16:9 and this is how it is viewed on my PC.
However if I export it to any format other than MPEG the first and last second of each clip stretches horizontally and then returns to the correct ratio (see images). I have tried every possible conversion with no luck. It is always the first and last second of a clip and happens for every clip in the film. The only time it doesn't happen is with the title templates.
VideoStudio :: Adding (film Burn) Or (light Leak) Effects To Clips While Editing In X4?
May 9, 2013I'm trying to find a way of adding "film burn" or "light leak" effects (which give a faded, colour distorted, 70s look) to clips while editing in VSProX4. I'm working with SD avi clips, in a 4.3 aspect ratio (made with Mpeg Streamclip). find something like a "grunge" effects plug-in, compatible with VS ProX4, that is not too expensive.
My OS is windows vista, 32 bit with a 98G hard drive and 4G of ram (on Toshiba Satellite Intel duo laptop).
VideoStudio :: Exporting Timeline Clips
Sep 8, 2013Just upgraded to X6 last week to start to edit a short movie that I am working with my students. Since is our first short with a lot of takes (about 74 takes in 7 scenes) and we had a lot of problems shooting because take more time them we thought! Well, now I am editing it but I need to export the edited clips (takes) in the time line to add special effects in HitFilm, so theres a way to export all those clips as MP4 or any format in a batch?
View 5 Replies View RelatedVideoStudio :: Moving Several Clips At A Time Along Timeline
Mar 15, 2012I'm working on a lengthy video highlights project with many clips less than 5 seconds and want to know the easiest way to bulk move at least 10+ clips at a time on the timeline to either an earlier or later point than they're currently at. In essence, I'm hoping that I can "bulk" cut and paste all these clips together instead of doing it one clip at a time by either dragging each individual clip or cutting and pasting.
View 5 Replies View RelatedVideoStudio :: Thumbnail View For Clips In Timeline?
Feb 3, 2013is it possible to show thumbnails of a clip in the timeline like this one?
View 2 Replies View RelatedVideoStudio :: Alter Volume Across All Clips On Timeline?
Jun 8, 2013I am using X6. When I tried to launch a music track from "Smartsound", (from the owned section) the "Add to Timeline" was greyed out.
I Split the Audio from the video and it landed in the VoiceOver track. Is it possible to make it land in one of the music tracks?
Is it possible to alter the volume across all the clips on the timeline without having to alter each clip separately?
VideoStudio :: When Attempting To Play Clips In Timeline - X3 Crashes
Dec 28, 2011I have recently upgraded from VS11 to Pro X3. However when attempting to play clips in timeline, X3 crashes.Playing 'project' works fine.
OS is Vista.
VideoStudio :: Small Symbol / Icon On Video Clips
Mar 20, 2011Just got a new HD video camera, Sony HDR-CX550V. Recorded short video clips and imported these clips (format AVCHD) to my computer using VS Pro X3. The imported clips have small icons or symbols in the top left corner. What do these symbols represent ? Where can I find descriptions of these symbols ?
View 2 Replies View RelatedVideoStudio :: Batch Convert With FX / Export Multiple Clips From Timeline
Aug 29, 2012My question is, does Videostudio X5 have the capabilities to either:
A) Batch convert while using one or more of the FX
B) Export multiple clips in one go from the timeline?
I have 120+ short video clips that I need to crop to a different size. I've figured out how to crop them to the size I need by using the "Croping" function in the FX. There seems to be no way however to apply this to all the clips at once in the Batch Convert.
The only way I can do it is to import all of the individual clips to the timeline and then export them individually...one at a time....taking a lot of my time. I notice they all retain their same file names in the timeline. Isn't there a way I can select all of them at once and export them with their individual file names all in one go (with any FX I've added)?
VideoStudio :: How To Identify Clips In Media Library That Are Inserted In Timeline
May 22, 2012How to identify clips in the media library that are inserted in the timeline. There is no "tick" mark to tell us
View 7 Replies View RelatedVideoStudio :: X3 Cannot Watch Video Clips In Timeline Or Preview Window
Jan 30, 2013I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies View RelatedPremiere Pro :: +/- Has Appeared On Clips In Timeline
Dec 9, 2013I'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies View RelatedPremiere Pro :: How To Move The Clips To The Timeline
Apr 17, 2014Nothing happens when I try to move the clips to the timeline. Have Windows 8.1. Premiere Pro CC.
View 3 Replies View RelatedPhotoshop :: CS6 Filters Grayed Out For Timeline Clips
Aug 29, 2012I've just watched an Adobe TV video by Julianne Kost about video features in PS CS6.At one point she converts a video clip into a Smart Object in order to apply a PS filter, but when I do this, the entire Filters menu is grayed out.
The mp4 clip plays normally in the Timeline otherwise.
AutoDesk Smoke :: How To Select Clips On Timeline
Oct 30, 2012I have got some questions:
1. How can I select many clips on the timeline? (I work with a Wacom tablet.) When I press the pen onto the tablet and move it, I can only pull the gap. In connect fx it works, when I hold cmd.
2. If I set markers in the timeline, is there a way to also see them in connect fx?
3.There is a function in Final Cut: When I I select a clip from the timeline and press "f" , I can go on working on its source clip in the viewer. Is there something similar in smoke? I cannot find the name for this function, so I cannot search for it in the keyboard shortcuts.
4. If I render something, is there a way that Smoke automatically copies the file (without copying the effects)? The reason for that question is: I applied timewarp to a clip, then I wanted to go on working on the clip in connect fx, but the length of the clip changed - it was shorter. When I went on working in action and put some lense flares and rendered it, everything was bended and looked weird. It looked great but I did not intend to do something like this.
The next questions are no real questions but rather problems.
5. When I work with audio (audio clip locked), I cannot really cut on the music, because 5a. sometimes the amplitudes do not match the music. An example: There is no amplitude, but the music goes on for 2 seconds. 5b. And when it is correct and I cut on the beat and render it, it is not sync anymore some moments later or when I restart smoke. (It only displaces 1 or 2 seconds from the sync.)
6. Since I have updated from pre-release 4 to pre-release 5, I cannot export anymore. I have read a lot on blogs, but I could not really find my problem. I cannot even press the export button.
AutoDesk Smoke :: Looping Clips In The Timeline
Feb 24, 2012I was wondering if when I stop a looping clip playing in my timeline, I could have it stop at the frame I stop on instead of stopping at the positioner or in-point. This is a very vital problem I'm having.
I have come up with a work-a-round but it doesn't work near as smoothly as I would like it to.
All I do for the workaround is instead of hitting space when I stop, I hit right alt to set an in point then hit space to stop and "A" to move to my newly created in-point. But it doesn't work as smoothly as it should. I would really like it to perform like playing a clip in the desktop works. It just loops around and when I stop, it actually stops.
AutoDesk Smoke :: Constraining Movement Of Clips In Timeline
May 1, 2013I'm coming from a Symphony and FCP background. I do a lot of keying in the timeline when I'm finishing, so I'm often moving the green screen clip from track 1 to 2 and then putting the BG on the lower track. I'm used to being able to constrain the movement of the clip so that it doesn't slide around on the timeline and get out of sync when I move it. Does smoke have a hotkey for this? I've noticed if I hold shift, I get some indication of where Smoke is lining up the clip relative to other clips by some highlighting, but this does not constrain the clip I'm moving.
View 9 Replies View RelatedPremiere Pro :: Taking Clips From Source Monitor Into Timeline?
Dec 16, 2013I can;t drag slected clip from the source monitor to the timeline.. it allows me to take audio but video won;t travel with it.. even if I just grab the video only icon.. it won't do it... i am using PP CC
View 3 Replies View RelatedPremiere Pro :: Non-functional Audio Clips Marked In Red In Timeline
Dec 1, 2013I am having an issue with Premiere 6.0 that I can't seem to solve. Some audio clips are showing up in red in the timeline and they just don't work at all. Here is how this went down.
I had to format my computer due to Windows related troubles and so I reinstalled the OS, installed all of my Adobe software and dropped the files back into their original locations. When I fired up premiere and opened the project, everything was looking fine and dandy until certain clips showed up in red and just didn't work.The only clips that were affected were audio tracks from AVI files that I separated from the video. They are not missing , premiere knows where they are and if I drag one into the timeline it will work just fine.
Premiere Pro :: Cross-hatched Clips In Sequence Timeline?
Jun 3, 2013I see that all but the first 7 seconds of the edited clips on the timeline are now cross-hatched. There's no video or sound when I scrub over the cross-hatched portion. I've tried removing all effects and transitions but no joy. There are several other sequences in this project which are all working normally.
View 9 Replies View RelatedAutoDesk Smoke :: How To Disable (bypass) Selected Clips In Timeline
Feb 21, 2013how to disable or hide or bypass the selected clips in timeline? I don't want to hide the whole tracks.
View 5 Replies View RelatedAutoDesk Smoke :: How To Drag Multiple Clips From Timeline Into Desktop
Dec 24, 2012I'm trying to drag multiple clip from timeline into desktop or library but all the clips always got spliced into a single clip. How to keep them as separated clips ? or individual clips ?
View 2 Replies View RelatedPremiere Pro :: When Drag Clips From Source To Timeline They Automatically Are Zoomed In
Jan 28, 2014I zoomed in on previous clips double clicking the timeline monitor and using the four corners tool. However, now when I drag clips in, they become distorted and zoomed in. How can I reset the monitor to match the source monitor?
View 2 Replies View RelatedPhotoshop Elements :: How To Place Photos Between Clips By Dragging To Icon
Feb 6, 2013In Elements 7 there are Transion Icons bwtween clips even when a clip is split.
It is possible to place photos etc between clips by dragging to icon.
This is is Sceneview & I take it that Quick in Elements 7 is similar.
There are no such icons in Elements 11 and all atempts to get photos places these at end and then these have to be moved.
AutoDesk Smoke :: Does Archiving Enables To Directly Import A Timeline Without Having Its Clips Loaded In System
Sep 30, 2013does archiving enables us to directly import a timeline without having its clips loaded in the system (like fcp and other NLEs) ?
View 2 Replies View RelatedVideoStudio :: How To Customize Old Film Filter In Pro X4
May 10, 2011I have started my project with the Instant Project function (middle category) and I am trying to apply the Old Film filter effect to my project but I want most of the original colour to come through. Rather than have the whole thing sepia with scratches and dust, I would like it mostly colour but with scratches and dust etc.
I have clicked on the strip of film that I want to edit the filter on and clicked 'Customize Filter' in the options. From there I clicked 'Duotone' and edited the picture there to how much colour I would like to show through. The problem is, when I click 'Ok', the colour hasn't changed when I go back and replay it. It is still all sepia and not colour.
VideoStudio :: X4 - How To Monitor Film During Recording
Jul 12, 2011I have a problem with Pro X4. With Studio 11 Pro, I was able to view the film during saving to file but I cannot with X4. I can't find a solution in the user guide.
View 1 Replies View RelatedVideoStudio :: Pro X2 - Unable To Burn Film On DVD
Nov 30, 2012I have used VideoStudio for many years. I am currently using VideoStudio Pro X2 and I am trying to burn a film I have just put together on a DVD. I have got to the Preview stage which works perfectly and then I am told to click on "Next" but all I am offered is a "Back" button. The instructions say that I should click on "Show more output options" but that is not there.
View 3 Replies View RelatedVideoStudio :: Old Film Effect In Color
Mar 3, 2012Is there any way to use the "old film" effect, but keep the original colors. I really enjoy the look of the scratches and dust, but I do not want a grey movie.
View 2 Replies View Related