VideoStudio :: X4 / How To View The Film When Saving To File
Jul 12, 2011With Pro X4 I am unable to view a display on my film during saving to the file.
View 12 Replies
ADVERTISEMENT
Lightroom :: 3.6 Can't View Photos On Film Strip In LIBRARY Setting
Feb 6, 2013On LR 3.6 I cannot view my photos on the film strip in the LIBRARY setting. On DEVELOP I can view on photo at a time on the film strip (the rest of the photos are not viewable). This is a new problem which has only occured on the last two imports.
View 3 Replies View RelatedLightroom :: 4.4 / Only 3 Thumbnails Will Display At A Time In Both Grid View And Film Strip
Jun 28, 2013I have Lightroom 4.4. and Windows 7--both of which have been working fine for several months. Starting a few days ago, however, thumbnails have refused to load for any NEW photos I import. They appear gray/blank in both Grid view and the film strip. However, if you click on any of the film strip thumbnails (while in either Grid view or Develop mode), that thumbnail and corresponding image WILL load--until up to three have done so. Then they begin disappearing again, allowing you to view no more than three images' thumbnails at any one time.
I can't review a shoot via Grid mode this way. I'm also afraid to use Lightroom while it's misbehaving, for fear of corrupting the catalog somehow (though all the images appear to be there). Searching this forum, I found several people who experienced having all of their thumbnails blank out and who were able to correct this by either reinstalling or removing their color profiling software. However, 1) I did this (and it didn't work), and 2) it isn't that all my thumbnails that have disappeared. All the thumbnails and images imported prior to the bug, still initially display correctly.* And I can get three thumbnails of the newer images to appear at a time.
*The asterisk is because after I poked around some more, I realized that if I opened other folders and began post-processing images from older uploads (vs. just viewing them), the thumbnails that initially displayed correctly everywhere also blank out and begin appearing in this up-to-three-at-a-time fashion.
VideoStudio :: X2 - Best Practice For Saving Video File
Mar 6, 2012My video is only for keepsakes of family and friends. I use VS X2 to create short movies. Once I create the movie I want to save it in a file of the highest quality given the camera it came out of. Would I get the best quality file by selecting Share-Create Video File- Same as First Video Clip? Once the movie is saved I wanted to delete the original video clips and the then useless .VSP file used to make the movie.
My thinking is that I do not want to keep all the video clips forever. Many of them are just no good. I use the best of what I shoot and put that into a movie. If I take this approach, will I be able to use movies saved as above to create a new production in the future? For example, create a compilation movie of my son in 2nd grade from the many shorter movies I took throughout the year. Would this compilation movie have the same quality as that created from the original video clips from the camera?
This is just a hobby for me and I don’t want to become buried under a mountain of video files that I will never use and eat up storage space on the PC.
VideoStudio :: How To Customize Old Film Filter In Pro X4
May 10, 2011I have started my project with the Instant Project function (middle category) and I am trying to apply the Old Film filter effect to my project but I want most of the original colour to come through. Rather than have the whole thing sepia with scratches and dust, I would like it mostly colour but with scratches and dust etc.
I have clicked on the strip of film that I want to edit the filter on and clicked 'Customize Filter' in the options. From there I clicked 'Duotone' and edited the picture there to how much colour I would like to show through. The problem is, when I click 'Ok', the colour hasn't changed when I go back and replay it. It is still all sepia and not colour.
VideoStudio :: X4 - How To Monitor Film During Recording
Jul 12, 2011I have a problem with Pro X4. With Studio 11 Pro, I was able to view the film during saving to file but I cannot with X4. I can't find a solution in the user guide.
View 1 Replies View RelatedVideoStudio :: Pro X2 - Unable To Burn Film On DVD
Nov 30, 2012I have used VideoStudio for many years. I am currently using VideoStudio Pro X2 and I am trying to burn a film I have just put together on a DVD. I have got to the Preview stage which works perfectly and then I am told to click on "Next" but all I am offered is a "Back" button. The instructions say that I should click on "Show more output options" but that is not there.
View 3 Replies View RelatedVideoStudio :: Old Film Effect In Color
Mar 3, 2012Is there any way to use the "old film" effect, but keep the original colors. I really enjoy the look of the scratches and dust, but I do not want a grey movie.
View 2 Replies View RelatedVideoStudio :: Pro X4 Edit Film Into Five Segments
Jan 22, 2012I have used Corel Video Studion for a number of years. I purchased VideoStudio Pro X4 some months ago and have no problem until now.Having edited a film into five segments. I have re-edited each segment with success until I got to the last one, having saved the earlier ones at each stage so only dealing with one at a time. On saving the last segment all went well until playback when I got the correct audio BUT the picture is now just a BLUE screen and nothing else. In desperation I delted the programme from the computer then reloaded, updated with service pack 1 and 2. Also, followed an on line recommendation to putin a new dll detail. Restarted the computer, downloaded the film and re-edited the final segment. It did seem to save quicker but AGAIN i have the correct audio BUT the same BLUE screen and for the life of me I do not know why.
View 4 Replies View RelatedVideoStudio :: Icon On Film Clips In Timeline?
Mar 3, 2011What does this icon indicate? See the attachment.
View 2 Replies View RelatedVideoStudio :: Cutting Film And Lack Of Sound?
Jun 26, 2011The problem is that when I put a 2minute film in AVI format it works great, but I want to put a piece of it, so I use option to cut the film and I'm doing from it let's say 30s clip. The problem now begins, because when I play this clip in "Clip" option tagged I got the sound, when I change it to "Project" the sound vanishes... Using full film the sound is available in "Clip" mode and "Project" mode.
View 6 Replies View RelatedVideoStudio :: 8mm Cine Film Converted To AVI Format
Jan 31, 2013I have just received back a 15min 8mm movie from a film transfer company. They suggested for editing purposes that it has been transferred as a AVI file.
Having transferred the AVI file to my Video folder in Windows 7 i have tried to enter the file into Coral Video studio 12 by right clicking on the time line, this will not open the file for me to edit.
The file plays straight from the disc ok on the computer ok but does freezes intermittently. the file size is 3.36Gb
VideoStudio :: Icons / Symbols In Film Clips?
Mar 26, 2012Any list of what the little symbols mean in the video clips? I stumbled (the usual method for finding anything out in Video Studio) upon somebody posting that twin icons that look like movie film mean that the clip has been through Smart Proxy. what all these cryptic symbols/icons/whatevers mean? I have the Picture Yourself book and the pamphlet that comes with VS4 and I can't find a simple page that explains these. How lame.
View 2 Replies View RelatedVideoStudio :: NewBlue Film Look Plugin - Invalid Parameter 15032:1:18
Sep 3, 2012I got in on the big sale that NewBlue was having and I purchased the Film Effects pack (finally!). Everything is installed and registered.
There are actually 5 individual effects that you get with the Film Effects, they are:
Film Camera
Film Damage
Film Express
Film Look
Film Pro
I can successfully add each of these to a clip in my timeline and then modify the attributes, except one.
The Film Look plugin give me the error:
Corel Video Studio Pro
Invalid parameter
[15032:1:18]
It is a Corel error dialog, not a NewBlue error dialog. Only the Film Look plugin give me the error, the other 4 work just fine.
I have fully purchased and legally registered Corel Video Studio Pro and NewBlue Film Effects running on Windows 7 Ultimate 64 bit.
VideoStudio :: Created Short Film Using Numerous Clips - Ratio Export
Sep 30, 2012I have created a short film using numerous clips. The footage is shot with a ratio of 16:9 and this is how it is viewed on my PC.
However if I export it to any format other than MPEG the first and last second of each clip stretches horizontally and then returns to the correct ratio (see images). I have tried every possible conversion with no luck. It is always the first and last second of a clip and happens for every clip in the film. The only time it doesn't happen is with the title templates.
VideoStudio :: Adding (film Burn) Or (light Leak) Effects To Clips While Editing In X4?
May 9, 2013I'm trying to find a way of adding "film burn" or "light leak" effects (which give a faded, colour distorted, 70s look) to clips while editing in VSProX4. I'm working with SD avi clips, in a 4.3 aspect ratio (made with Mpeg Streamclip). find something like a "grunge" effects plug-in, compatible with VS ProX4, that is not too expensive.
My OS is windows vista, 32 bit with a 98G hard drive and 4G of ram (on Toshiba Satellite Intel duo laptop).
VideoStudio :: Spacebar Does Not Work To Stop And Start Film When Time Code Flashing
Mar 29, 2011the spacebar does not work to stop and start film when the time code is flashing (hours, min, seconds, frames any).
View 1 Replies View RelatedAutoCAD LT :: Automatic File Saving Is Not Saving Temp Files?
May 7, 2013AutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
AutoCad 3D :: Model View Changes When Saving?
Oct 30, 2011If I am working on a 3D model and viewing it in 2d wireframemode, it will automatically switch to 3D wire frame view after I save it. This changesthe background colors and switches to a perspective view. How I can maintain the current view mode during a save?
View 1 Replies View RelatedIllustrator :: CS4 View Doesn't Match View Of Same File In Acrobat
Apr 11, 2013The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec.
AutoCAD 2013 :: When Saving Switches To Perspective View
Mar 21, 2013On some 3D models, when I save the drawing, it automatically switches to perspective view and turns the sky background on. This is irritating.
I found this old thread in the AutoCAD Architecture area from 2010
[URL]....
Even setting the sky background to 1, then 0 doesn't work. When I save, it reverts to a perspective view and turns the sun/sky back on.
AutoCAD MEP 2010 64 bit
Revit Architecture 2010
Windows 7
AutoCAD Architecture :: Switches To Perspective View When Saving
Dec 6, 2010When saving (ctrl+s) or switching between layout/model ACAD 2011 changes view to perspective and 3D wireframe. This occurs only in some drawings.
View 3 Replies View RelatedGIMP :: Automate Repetitive Actions Such As File Size And File Saving To Same Folder?
Dec 6, 2011Is there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies View RelatedIllustrator :: When Saving A File Using Save Option / File Is Not Staying At Size Of Artboard
Jun 18, 2013am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedPhotoshop :: Automation In Saving Image File With Specific Max File Size
Oct 18, 2013Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
Illustrator :: OS X 10.8 Saving Opened / Edited CS5.5 And CS6 File Rewrites File Permissions
Dec 5, 2012Open an .AI file saved on a netapp or windows shared directory with full permissions (prior to saving I noted that all security groups are intact in file properties as we have 2 for read and write access)Make any changesTry to save and get the prompt: Can’t save preview, but all other information was saved successfully. The file couldn’t be found. ID = -43 (file is now corrupted and looking in security group file properties the 2 security groups designated for read and write access for the directory is now gone and shows an unknown security group????)
Save as works without a problem. Try to press save again and get This file has been modified outside Illustrator. Do you want to continue?Continue and prompted This file cannot be foundObviously the file preview icon goes from a thumbnail of the file to a generic iconWhen I try to open the file I get: Can’t open the illustration. The file is locked or in use.It led me to believe the issue was either OS X or CS5.5. I was able to open the file fine on Windows Illustrator CS5.5 make a slight change and resaved (which fixed the file and opens again in OS X and read/write security groups show up again?)Optionally, I was also able to fix the file to where I could open it in OS X by simply giving myself Read/Write access to the file from Get Info
Notes:No issues with the same file in 10.7.x.
I've tested on all available Mac Pro / MacBook Pro machines and issue doesn't seem to happen on MacBook Pro retina?Photoshop and InDesign not affected
AutoCAD Inventor :: ILogic Error Cannot Find Excel File After Saving File As Template
Dec 6, 2012I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
Paint Shop Pro :: Saving File In Other Than Original Download File
May 24, 2012When I bring up n image file from a folder and after I work on it I would like to save in another folder other than from the original download file which is the only choice I seem to get.
Is there way to designate a "default" folder for saving other than having to continually search for the folder I wish to save to?
Illustrator :: Saving Symbols From AI File In Existing Symbol File
Feb 28, 2012I saved a symbols file with a few symbols in it.
I then create new .ai files - create some graphics then want to save some of them in the symbols file.
I dont see a way of saving symbols from the .ai file into the already existing symbols file.
VideoStudio :: Pro X4 Saving Movie As WMV?
Aug 29, 2012New Vs pro x4 user here.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
VideoStudio :: Saving A Still Image
May 2, 2012I have VS11+ and I want to save a frame of my project as a still image. The project and footage is
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have clicked on Save as Still Image and the frame appears in the Image folder, although it is square looking with a black border all round. If I put it in the timeline I can make it into 16:9 like the rest of the footage. But where is the image actually saved so that I can use it in other media? How can I decide whether to save it as JPEG or whatever? And why is it in a black box and quite square if it was shot in, and the project is, 16:9? Can I save it as a 16:9 image?