On my trial version of ProX5, when I went to use the DVD label burn feature, I complete the label, when it asks me to save it I do with a file name but my new text and image aren't saved when I look at it again within the project and after I save the DVD label it shows as a .UPL file that Windows 7 does not recognize.
View 2 RepliesI just downloaded/installed Video Studio X4 Pro. Quite impressive. I've been using Roxio but too many problems so wanted to see if Corel is better. Have a minor problem that I haven't been able to solve. Background: I have 16 individual videos of foreign "soap operas" (all approx 3.7gb). All videos are either mpeg2 or avi. I copied all of them with no problem. Then, I wanted to eliminate some useless things at the beginning and end of each one. I went into a video editing program and trimmed approx 5 secs from the beginning and end of each video. After the trimming, I saved the videos to my hard drive in the My Videos folder in the Libraries. Then, because of some difficulties with Roxio, I decided to try Corel.
When I import a video, click on Tools, Create Disc, DVD, unmark Menu, then Burn, I always get the error telling me the total size is larger than the chosen project. This is what I don't understand. If the video, which is approx. 3.7gb,and I'm using a 4.7gb dvd, why am I getting this error? FYI: I went ahead and clicked on Yes, try to fit to disc, and after approximately 45 mins, it completed, ejected the disc and all I had was approx. 1/8" burn area. The properties of that disc showed it was a video.ts and when I clicked on it, the windows player opened and said can't be rendered. I don't under stand why X$ Pro says a 3.7gb video is over 7gb.
I have an mpg file which I am trying to burn to disc using VS4 but when it gets to 99% of the conversion it sticks and I get an unspecified error message and I cannot burn the file.
View 5 Replies View RelatedNot that it matters, I don't think, but I have been unable to burn an ISO file onto a usable DVD. In the Sharing module of VS Pro X6, after opting to burn a DVD, I select both "Create Folders" and "Create Disc Image." Both are created where I send them and I have no trouble creating usable DVDs by burning the folders onto a blank DVD after telling the Cyberlink burning software that I'm creating a video DVD. But I can't figure out a way to burn the ISO file disc image onto a DVD except as a data DVD, which, unsurprisingly, does not create a usable video DVD. (Cyberlink, at least, will not recognize the ISO file or the folder that it's in to burn a video DVD.) Is there a way within X6 to burn video DVDs from the saved ISO disc image (or from the saved folders for that matter) without re-rendering the video clips? (Also, while I'm asking, I take it that there is no difference between a DVD created from folders and the same content created from an ISO image. If this is right, why the two options?)
View 13 Replies View RelatedI seem to have inadvertently done something that has increased the time it takes to burn a DVD or ISO Image file from less than an hour to over 7 hours. I'm working on my first project, and have burned several discs along the way, and most burn in well under an hour. Then ... I must have changed something without understanding what it meant, and the time to burn has increased by around 10 X. Hardware acceleration for everything is On, and disabling it slows the process down even more.
The project is a video slide show with 994 photos, a music track ripped within VS5 from a CD to wav files. The project ends up just over 5 GB to burn to DVD. I tell it to let DVD Fit adjust the size down and it does reduce it to 4.38 GB.
Another thing I noticed, is that after letting it run to completion, instead of it taking up most of the DVD, the DVD is only half full even though I'd expect it to be almost full with 4.38 GB and it has been up until this problem started. And if I make an ISO Image instead, it is less than 2 GB in size instead of close to 4.38 GB. I'm wondering if some how I told it to do a massive job of compression?
FYI - I'm using the trial version of VS5, so it may not have SP 1 installed, and it appears that SP 1 cannot be installed on a trial version.
I'm using the free trial version of Videostudio X5 and have 3 video files I am trying to burn to a BD-R disk. The files are H.264 and when I preview it before burning, the menu I created works fine. One of the three files is large, over 9gb. When I burn the disk, the large video file is not burning correctly. When I go into that file from the menu, it just loops back to the first menu item. I tried burning just the large file to a BD-R and it worked fine. The total project size is around 17 gb so I'm under the 25 gb limit. I think the next thing I'll try is breaking the large video file into two files. I'd like to buy the software if I can get past this glitch.
View 7 Replies View RelatedI thought I had read somewhere, before I purchased X4 Pro Ultimate, that BluRay could be burned to regular DVD if the files were small enough. Is that not true? Attempting to burn an 800MB file in BLuRay to a DVD+R yields an error message stating I need to use BD discs.
View 6 Replies View Related(1) whether VS Pro X4 will support the 3D video clip taken from Panasonic HDC-SDT750 3D capable camcorder?
(2) If it is supported by VS Pro X4, how do you render or burn the 3D video file onto BD disc so that it would be recognised as a 3D video format disc and playable in a 3D Blu-ray player?
I couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
When the video file is saved and burn on DVD disc and play on a DVD player, only the images appear on the TV screen but there is no sound coming out from the speakers. I'm using Studio Pro X4
View 7 Replies View RelatedI am using the trial version of vx4. All is ok until I go to the create dvd page. The burner drive has no device listed. Create to disc is shaded out. I am able to burn discs with other programs.
View 5 Replies View RelatedI usually download my DV tape from the Panasonic analog camcorder to my JVC DVD recorder. However, I wanted to try downloading from the cam to the PC. I connected the cam to the PC and started VS Pro X3. When I click on "source" I get the message: No video device driver installed or device is not connected. The device (cam) is connected and the 1394 port is wrong properly. Then the video driver is needed. Where do I get this from-do I need to reinstall VS?
View 8 Replies View RelatedI currently have a Sony HDR-CX160 camcorder, which does not have a firewire port. I also have a 3 month Dell XPS8500, which does not have a firewire port. I am running Windows 7 64bit. When I hook up my camcorder via USB, Windows DOES recoginize it. It is not recognized by Corel, not in the Capture Video, Import form Digital Media,, Import from Mobile Device or Stop Motion. (my webcam does show up) It does not show up in the pull down tree. I understand that you can use Windows Movie Maker, or the supplied Sony PMB software to download it, but I paid for Corel to be able to do this. Why I would like Corel to be able to do this is that you need a"live" camera to be able to use the Stop Motion Capture, not something that has been recorded before.
View 7 Replies View RelatedFollowing Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
The 720p avi files on my toshiba camileo s20 are not recognized by my VS pro x2. VS will not capture them either from the camera or from the sd card. It does recognize the files on the sd card and shows a thumbnail, but when I try to capture them it says it cannot do so.
I can capture the files using windows 7 moviemaker but the avi files are still not recognized by vs even though windows movie maker has no trouble with them and treats them like any avi file. I have made a dvd with windows mm using those files.
VS does handle sd avi files from my JVC camcorder but no joy with the Toshiba. I have both the 1 and 2 updates for vs x2.
I'm using the TBYB version of X4. I have 39 video clips that were recorded on a new samsung standard def. vid cam. The native files are MP4 files. I transfered them from the SD card to my hard drive simply by dragging them over. They play fine in any version of VS.
I'm doing NOTHING fancy. No moving menus. No music on the menus. Just a main title page and enough menu pages to accommodate the 39 files. No audio normalization.
It NEVER gets to the point where it outputs to the DVD. As soon as it finishes whatever it's doing on file 39....whammo....unspecified error. It also takes 30+ minutes to render the file, never getting to the burning.
I have a 2.8ghz Quadcore CPU running Win7 64 bit Professional.
I tried this same procedure in X2. Burning completed successfully to the SAME blank DVD-RW and took approx 30 mins....so X2 on my system is faster.
Unfortunately, X2 is unusable for me with any video files OTHER than AVI files. Any other video files result in "skipping" audio as I've reported in another thread.
I've restared the project from scratch several times but to no avail. Is pointless to try X3 because it has the same audio problem for me that X2 has. My DirectX runtimes are from Oct. of 2010.
Does VS5 have the DVD burn program within it, not a separate program? I am using Corel DVD Movie Factory and also use ProX3. I prefer using my own template or rather my own jpegs for the background. Movie Factory forces me to use their templates, meaning I can't just have a jpeg in the background, have to use their gallery and I spend frustrating time moving off the template parts or hiding them, unless it's there in Movie Factory and I just didn't know how to not use something from the gallery.
View 5 Replies View RelatedWith VS X4 I edited my .mts files into .vsp files. Then successfully created video files (.m2t 1440 x 1080 files) . I selected 1440 x 1080 because it is the setting set on my camcorder.
My question is in the Create disc step:
1. if I burn these .m2t files and select "DVD" would the resolution be back to that of .mpg in the final DVD?
2. If I burn these .m2t files and select "AVCHD" and instead of burning directly onto a disk, placed it on a hard drive folder. Then later could I burn it on a regular DVD disk? If that is the case, is the disk playable on a regular DVD player? Or, do I have to burn it on Blue Ray?
I know I could experiment it but my project has 4 Titles, each of about 30 min duration, that I want to burn. I tried to find the answer on the Forum and also in the Manual but could not find the answer there.
When I get to the step where one edits the main and sub menus, I am only given the option to RETURN. The NEXT button is missing. This problem appeared after I was forced to re-install VSX2 following a computer crash. I am now running it on Windows 7 Home Premium.
View 2 Replies View RelatedI just tried to burn a DVD for the first time on my new computer and it keeps getting to "output disc" and crashing. A Windows message pops up saying it had a problem and needs to close the program. Is this something with Windows 7? I've already updated my VS x2 and directX.
View 6 Replies View RelatedI want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies View RelatedOn Windows 7 OS (64bit) getting the following error when attempting to burn a DVD: Unspecified error 5:0:0
I've attached a jpeg image containing the error.
Tried looking in the knowledgbase, but of course it's under construction. Tried contacting support, but of course the chat system is down. Then to add insult to injury, friggin Corel wants to charge me $15 to describe to them this burn error on their product. If I had known that this was the quality of product and level of support I was going to receive, I never would have purchased this product.
System info:
Box: Shuttle Inc SG45 V10
OS: Windows 7 Ultimate (x64) (build 7600)
CPU: 2.67 gigahertz Intel Core2 Quad Q9400
RAM: 8GB
Disc: 1.5TB (spread across 3 discs)
My Videostudio is in Chinese(I hate it but no choice in HK shops), so sometime is hard for me to understand how to do this and that!
I see some topic said I can try to make a ISO first instead of using the burn function, I try to output the project to a videso and a m2t file come out, I getting confuse now, how can I make the ISO file, by using the create video file? or create a disc? I have different project all put in one disc, if I burn the ISO, still have the menu?
I am trying to burn multiple copies of a video I have produced. In the final screen to create a disk there is an option to choose multiple copies. I always select multiple copies and it burns the first one perfectly, the burner drawer opens and it asks me to provide another disk. When I do so I get the error: "Does not support burning of DVD-Video on Empty disc. Supports burning on DVD-R/DVD-R DL/DVD-RW/DVD+R DL/DVD+RW disc. Please insert another disc to continue, or click Cancel to stop the process."
The disk burner is a ASUS BW-12D1S-U.
This is quite frustrating as I seem to have to cancel each time and ask it to generate another disc, which I suspect is a longer process then just making multiple copies.
I'm using video studio pro x3 and windows 7.
When trying to create a disc it opens dvd factory 2010 and does everything Ok but when I try to burn the project it gets about 95% through the burn process and fails. It seems like it is putting the files on but failing in the "writing lead out" phase. I've tried 3 different dvd burns to make sure that isn't the issue. I can create a file and then use nero to burn the disc fine but not when going through VS pro x3/DVD factory
I've had nothing but problems with this latest project, finally got what looks decent and can't get past "preview" in the burn module. There's no "next" button, just "back."
Here's the details.
Operating system: Windows 7 Home Premium
VideoStudio Pro x2 - downloaded the patch
Project Properties:
NTSC
6.73 KB
37:31 minutes long
Still images are jpeg
videos are both MJPEG and Microsoft AVI (camcorder AND still digital)
Edit file format MPEG - should I try AVI?
Microsoft AVI files
24 bits, 704 x 480
frame-based
4:3
MJPEG Compressor - should this be something different?
PCM, 48,000 kHz 16 bit stereo
Image: Keep aspect ratio checked
apply anti-flickering checked
VS Pro X4 - I do not consider myself an expert with video editing/authoring, but I do have a fair amount of experience with capturing/editing/authoring h.264 files via a Hauppauge 1212 HD-PVR, ArcSoft Total Media Extreme, and VideoReDo. In fact, I have burned around 5,000 DVD and 2,000 AVCHD discs with outstanding results using those products, as well as editing and storing thousands more captured programs directly to HDD. Unfortunately, these products do not allow me to create Blu-ray discs, so that is why I am trying to switch over to VS X4.
My baseline for what I want from VS X4 is simply what I have been able to do with no effort at all using ArcSoft Total Media Extreme (supplied with the HD-PVR): I capture HD programing at 1280x720p 60fps using a variable bit rate (usually 7 Mbps) and AC3 audio, edit out unwanted material, add menu and chapters, then burn directly to an AVCHD disc. Using this method, I generally get a minimum of 3 hours HD material on a standard DVD5 blank, and total authoring/burning time for a disc is somewhere around 20 minutes.
My problem is that I have not been able to come anywhere close to this efficiency yet with VS X4. The .ts source files play and edit in VS X4 just fine, but then I hit a wall when I try to produce the output. There don't seem to be any default project profiles to create AVCHD 1280x720p, and even when I try to use Customize, i cannot access the needed fields, such as user defined frame size. And everything I have tried produces HUGE output files, 4 or 5 times larger than the source files!
Sample Source file MediaInfo:
ID : 0 (0x0)
Complete name : C:UsersPublicVideosInput for Edit or ResizeHoliday for Lovers 720p_7.1v.TS
Format : MPEG-TS
File size : 2.30 GiB
Duration : 1h 43mn
Overall bit rate mode : Variable
Overall bit rate : 3 166 Kbps
Maximum Overall bit rate : 18.0 Mbps
[Code] ...
I have created disc images of some projects. The 'share' option allows for making disc images but I can't see how to burn a disc from the image using VS X4.....the 'create disc' section does not seem to accept an image for burning.
View 3 Replies View RelatedHow to setup the burning speed for DVD using the Videostudio x4??? My setup menu for adjusting the speed recording wont highlight.. I've try to reinstall the software many times, but i wont get it done.
View 2 Replies View RelatedI have rendered the AVCHD video files (Full HD video) in Video Studio Ultimate X5, and under the "Share | Create Disc" option I created the files to Folder instead of burning directly to Disc as I wanted to save the "Folder" for future Blu-Ray disc burning if needed.
The question is, after the files are created in Folder what is the proper procedure to burn the "Folder" onto a Blu-Ray disc so that the disc will be playable in a Blu-Ray player?