VideoStudio :: Create Video File Formats
Feb 17, 2011
I have 50 inch 1080p TV and a media player that can play almost any format. I have VideoStudio X3 and a decent core2 PC running XP. I have a few 1 hour each video files that I captured from my sony SD camcorder few years back using Firewire. These video files are like 25GB each and not high def.
Now I have edited some of these video files but I am not sure what is the best format to use when creating video file to watch it on my HDTV. I don't need to burn disks or re-edit the files once I am done editing one time.
I have tried custom MPEG2 with 8000 bit rate and 100% quality and it looks okay but grainy on my HDTV. I tried avchd/Blu-ray and they look much smoother on HDTV however they are a bit soft and dull in colors and not as sharp as custom mpeg2.
There are so many formats like DVD mpeg2/AVCHD/HDV/Blu-ray with mpeg2 or h.264 and videostudio help did not do a good job explaining them So I would hope experts here would guide me what best quality format should I pick for these SD videos so that they look nice on my HDTV. Would picking aspect ration to 16:9 make any difference for these sd video?
I am sure when I buy an HD camcorder I would have better options to keep picture quality great.
View 3 Replies
ADVERTISEMENT
Jul 7, 2011
Need brief overview of the different formats in "Create Video File"?
MPEG-4, DV, DVD and the difference between this and Create Disk?
I have created my project on a laptop that does not have a DVD Burner. Should I create an MPEG file and copy it over to a desktop that has a DVD burner? Just looking for the best way burn a DVD.
View 3 Replies
View Related
Jun 26, 2011
My latest problem is file formats! I have two cameras, one of which produces .AVI video format. I have found that Corel does not "read" this format - or am I wrong? I am working from a card reader. I have succeeded in using the latter files in VS but only by converting to MP3. I don't want to part with this very handy camera so am I missing something in that perhaps I can change some setting to enable Corel to recognise .AVI files? I don't want to have to use the editing suite which came with my Traveller camera. I have found it is easy to load via Picasa - which accepts many formats - but it's when I come to insert media file to the VS library that the trouble starts - obviously because the files are .AVI.
View 2 Replies
View Related
Jul 25, 2011
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
View 9 Replies
View Related
Dec 10, 2012
When capturing video, other formats besides DVD are missing. I am trying to import video for outputting Blu-Ray but I am unable to select Blu-Ray as the imput format. It's not greyed out, it's missing along with other formats. The only format that you can select is DVD.
View 14 Replies
View Related
Jul 13, 2013
I have several different video clips with different formats from different cameras I'd like to use in one project. Is this possible and if so, is the rule to use the lowest common denominator? e.g. One file type is 25fps, 720x576 non-hd and another is 50fps, 1280x720 hd, so the output would have to use the first specs? What about different clips and the upper, lower, frame based thingy? I did try one experiment combining the two examples above using the first specs to create and avi file and the original 720x576 quality was reduced but the 1280x720 came out fine. Thats why Im asking - If I created the output based on the first lower specs, why did the clip with those specs turn out worse?
View 14 Replies
View Related
Nov 19, 2012
I have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies
View Related
Jan 25, 2011
I am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
View 8 Replies
View Related
Aug 23, 2011
I just upgraded to the X4. I never had this problem with the X3. I use a hitachi camcorder and the clips it produces are mpeg. The settings I use on the X4 are the default settings. When I place the clips on the timeline, they show up as 16:9. When I press play, they are still in 16:9 format.
However, when I create a video file using option DVD 16:9, I get the following problem. While the clip is playing, it will start as 16:9 then change to 4:3 and then back to 16:9 again and so on.
Is there a setting that I'm supposed to change. This never happened with the X3.
View 3 Replies
View Related
Feb 6, 2012
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies
View Related
Dec 1, 2010
All my clips are 1440 x 1080 but, for some reason, the Project Properties are 720 x 576.Don't see that as any problem providing I can select the higher quality settings when I go to create a Video File. And that's where the problem begins.If I go Share/Create Video File/Custom I can see the properties in the Save Options box are 720 x 576 and I can't change them.I've tried clicking on Options and looking under the Compression tab but my only options there are PAL DVD or NTSC DVD. I can't find any option that will let me get the file back to the original properties of 1440 x 1080.I'm NOT trying to create a DVD - just a high quality file that I can play back on my computer and on my HD TV.
View 8 Replies
View Related
Jan 24, 2013
I have some pairs of left and right videos that plays fine on 3D player that combine both files to 3D output. How do I edit the pair to one side by side video with videoStudio 5 pro?
View 3 Replies
View Related
Aug 25, 2011
Wits end with VS X3 and X4.
I shoot with a Zi8 in 720p mode. I import the file (MOV) and work on it in VSP X4 - no problem. I see the preview window in full widescreen (no black bars). I have tried every possible option to get an FLV file out of X4 without the black bars and it's no use.
Here is a screen shot of my X4 preview, side-by-side with what I see on the web. [URL]
I also get the black bars when I view the FLV file on my desktop using Wimpy FLV player: [URL]
View 2 Replies
View Related
Feb 10, 2006
Nature of the problem: Following the recommended procedure, I get to the phase where you created a video file. However when I go to preview the file, its badly pixelated.
Properties of your source files: All are clips from unprotected DVDs and play fine when captured.
What devices are involved and their mode of connection: Direct from computer's DVD player/recorder.
Project Settings: As listed under recommended procedure.
Output format: Mpeg to be burned to DVD.
PAL or NTSC: NTSC
Error Codes (if any): None
System information: AMD 64 3500+ w/ Dual SLi 7800 GTs and 2 GB of RAM.
I suspect that its a setting somewhere that has been changed because on a prototype I made using some of the same clips it worked fine. Then just stopped and started pixelating out of the blue.
View 9 Replies
View Related
Feb 23, 2013
In VS X4 Create Video File there are several AVCHD settings.what the difference is between AVCHD 1440 x 1080P and AVCHD 1440 x 1080 ?With and without "P"?
View 4 Replies
View Related
Apr 11, 2013
I couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
View 1 Replies
View Related
Sep 29, 2011
I've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies
View Related
Sep 15, 2012
The organizer in my PSPX5 U only shows video files, AVI, MOV, etc. I will not display JPG or other still image formats. I also have VideoStudio X5 U installed. I removed PSPX4 where the organizer worked properly. I cannot find a setting to disable or activate a file extension other than in the Preferences, where there is no mention of a video format.
View 2 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related
Jun 26, 2013
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
View 1 Replies
View Related
Mar 13, 2012
I downloaded a trial copy of the Corel VideoStudio Pro X5 Ultra. Every time I click on the Create Video File button the program crashes. I get a message that the program must exit. Every time I try this, it crashes.
View 4 Replies
View Related
Mar 20, 2011
Why is the "User Define" Button grayed out under share/create video file/various HD selections and only the SD 720X480 max and lower available?
View 9 Replies
View Related
Jun 27, 2011
I had a time where I shot some home videos on my old Sony DV camera (type2 DV 29.97fps) and also some on my other digital cameras of various models which recorded in mjpeg (20fps), h.263(30fps), mpeg4sp (29.97fps), and even a few .asp. I want to combine all these in chronological order on DVD. But I worried about which format to choose when rendering such a mixture, since I've heard that type 2 DV should be lower filed first. Will that mess up the way the other files are rendered? I was wondering if i should render the DV out to DVD compliant mpeg2 first and then add in the others in another project.
View 2 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Sep 14, 2012
I have a 4:3 PAL project and I have been told to create.. a video that is 720 x 576 16:9 anamorphic or 4:3 anamorphic if using Premier pro
View 3 Replies
View Related
Mar 27, 2013
I am trying to CREATE A VIDEO FILE in X6. The video files are in AVI format (taken from DSLR). When I do try to create a video file I get the error message:
I do not get this error in X4. Further, it seems I don't get this error message in all AVI files. Some are ok, others aren't. very strange indeed.
View 1 Replies
View Related
Feb 21, 2012
Im getting myself in a mess with this one, i need to have a picture as the background With two videos running one in the blue section & one in the red!
Is there a easy way to do this? or will i have to make two mask one for each video? if so how would i make them?
View 4 Replies
View Related
Jun 18, 2011
I created a long video of me playing a number of cover songs and I want to grab those songs individually so I can post them on YouTube.
I'm using Ulead Video Studio 11 Plus.
View 13 Replies
View Related
Mar 17, 2008
i would like to know what are the supported video formats that photoshop cs3 can open, i tryed mov and it said couldent open file, avi and nstc and they all said the samething so can anyone tell me the supported video formats?
View 2 Replies
View Related
Apr 2, 2014
I am having trouble with Adobe Premiere Pro CC regarding which video formats it will accept in my video editing.
I have tried uploading basic .avi, .mp4, and .mov files, but they all say "unsupported format or damaged file" and I know that the files are definitely not damaged.
I can convert all video files to whatever mainly-used format but it would take a while to find the right ones.
View 2 Replies
View Related
Jul 3, 2013
I want to reverse a video clip backwards at speed.
How could I create the old VHS rewind-look where distorted lines appear across the screen. Any filters handy for this? Using VSP x6 Ultimate.
View 4 Replies
View Related
