VideoStudio :: Create Mask For Video?
Feb 21, 2012
Im getting myself in a mess with this one, i need to have a picture as the background With two videos running one in the blue section & one in the red!
Is there a easy way to do this? or will i have to make two mask one for each video? if so how would i make them?
View 4 Replies
ADVERTISEMENT
Aug 29, 2011
I can't seem to find any masks, or make a successful one myself in Paint Shop Pro, that creates a white photo border around a video, to make it look like a bordered photograph. All the edges I've made want to let the video show through the white border. How to do this? I just need a white border around a video to appear as if it's a photograph.
View 7 Replies
View Related
Jan 22, 2012
I am working on a video piece and I need to mask out a moving figure throughout the entire video, what is the best way to to this? I know that I can import the video frames to layers in CS3 and then create a mask on each frame, but there are thousands of frames - and when I render the video from the animation it is slow to run in quicktime. Even if I were able to edit each frame, it seems like there should be a better way.
View 6 Replies
View Related
Sep 14, 2012
I have a 4:3 PAL project and I have been told to create.. a video that is 720 x 576 16:9 anamorphic or 4:3 anamorphic if using Premier pro
View 3 Replies
View Related
Mar 27, 2013
I am trying to CREATE A VIDEO FILE in X6. The video files are in AVI format (taken from DSLR). When I do try to create a video file I get the error message:
I do not get this error in X4. Further, it seems I don't get this error message in all AVI files. Some are ok, others aren't. very strange indeed.
View 1 Replies
View Related
Jun 18, 2011
I created a long video of me playing a number of cover songs and I want to grab those songs individually so I can post them on YouTube.
I'm using Ulead Video Studio 11 Plus.
View 13 Replies
View Related
Jul 3, 2013
I want to reverse a video clip backwards at speed.
How could I create the old VHS rewind-look where distorted lines appear across the screen. Any filters handy for this? Using VSP x6 Ultimate.
View 4 Replies
View Related
Nov 19, 2012
I have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies
View Related
Nov 30, 2012
I am trying to create a introduction clip to a video. This is just a short written intro describing the contents of the video. Is there a method in VideoStudio X5 Pro that would allow me to do this?
View 3 Replies
View Related
Jul 7, 2011
Need brief overview of the different formats in "Create Video File"?
MPEG-4, DV, DVD and the difference between this and Create Disk?
I have created my project on a laptop that does not have a DVD Burner. Should I create an MPEG file and copy it over to a desktop that has a DVD burner? Just looking for the best way burn a DVD.
View 3 Replies
View Related
Jan 25, 2011
I am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
View 8 Replies
View Related
Jun 7, 2012
I have been trying to create a short video that will show some video through a title. I have found a Corel Tutorial on how to do this but it seems to be for an earlier version of VS since I do not see some of the screens in X5 that are shown in the tutorial. I am still basically a beginner with some of the VS features so may have easily overlooked the process.
View 3 Replies
View Related
Feb 17, 2011
I have 50 inch 1080p TV and a media player that can play almost any format. I have VideoStudio X3 and a decent core2 PC running XP. I have a few 1 hour each video files that I captured from my sony SD camcorder few years back using Firewire. These video files are like 25GB each and not high def.
Now I have edited some of these video files but I am not sure what is the best format to use when creating video file to watch it on my HDTV. I don't need to burn disks or re-edit the files once I am done editing one time.
I have tried custom MPEG2 with 8000 bit rate and 100% quality and it looks okay but grainy on my HDTV. I tried avchd/Blu-ray and they look much smoother on HDTV however they are a bit soft and dull in colors and not as sharp as custom mpeg2.
There are so many formats like DVD mpeg2/AVCHD/HDV/Blu-ray with mpeg2 or h.264 and videostudio help did not do a good job explaining them So I would hope experts here would guide me what best quality format should I pick for these SD videos so that they look nice on my HDTV. Would picking aspect ration to 16:9 make any difference for these sd video?
I am sure when I buy an HD camcorder I would have better options to keep picture quality great.
View 3 Replies
View Related
Jul 30, 2012
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
View 1 Replies
View Related
Aug 23, 2011
I just upgraded to the X4. I never had this problem with the X3. I use a hitachi camcorder and the clips it produces are mpeg. The settings I use on the X4 are the default settings. When I place the clips on the timeline, they show up as 16:9. When I press play, they are still in 16:9 format.
However, when I create a video file using option DVD 16:9, I get the following problem. While the clip is playing, it will start as 16:9 then change to 4:3 and then back to 16:9 again and so on.
Is there a setting that I'm supposed to change. This never happened with the X3.
View 3 Replies
View Related
Feb 6, 2012
when i want to create video file in pro x4 the program crash, i reanstall the program and i stiil have the same problem.
View 3 Replies
View Related
Mar 23, 2012
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
View 14 Replies
View Related
Jul 9, 2011
I would like to use Corel DVD Factory to "Create Video Disk". I have created my mpg (Movie Clip) vidoe file and have placed it in a "c:video" directory tree.
How can I user Corel DVD Factory to Create Disk and drag/drop my file to that application?
When I "Select Photos and Videos" it brings up the Library but it doesn't show what I want and I'm not sure how to navigate tothe .mpg file I created so that I can drag/drop to the Media Tray.
View 1 Replies
View Related
Oct 4, 2011
I want to create video clips on top of my bands music. I load the music track just fine. Now I have 10 or so video clips that need to be inserted in certain places on the timeline to be sync'd with the music. But everytime you bring a clip into the video row it automatically locks to the last clip entered. Why can't you place the clips of the artists playing, in the correct place in the timeline? Also isn't there a way to display the audio track as a waveform?
View 2 Replies
View Related
Dec 1, 2010
All my clips are 1440 x 1080 but, for some reason, the Project Properties are 720 x 576.Don't see that as any problem providing I can select the higher quality settings when I go to create a Video File. And that's where the problem begins.If I go Share/Create Video File/Custom I can see the properties in the Save Options box are 720 x 576 and I can't change them.I've tried clicking on Options and looking under the Compression tab but my only options there are PAL DVD or NTSC DVD. I can't find any option that will let me get the file back to the original properties of 1440 x 1080.I'm NOT trying to create a DVD - just a high quality file that I can play back on my computer and on my HD TV.
View 8 Replies
View Related
Jan 24, 2013
I have some pairs of left and right videos that plays fine on 3D player that combine both files to 3D output. How do I edit the pair to one side by side video with videoStudio 5 pro?
View 3 Replies
View Related
Aug 25, 2011
Wits end with VS X3 and X4.
I shoot with a Zi8 in 720p mode. I import the file (MOV) and work on it in VSP X4 - no problem. I see the preview window in full widescreen (no black bars). I have tried every possible option to get an FLV file out of X4 without the black bars and it's no use.
Here is a screen shot of my X4 preview, side-by-side with what I see on the web. [URL]
I also get the black bars when I view the FLV file on my desktop using Wimpy FLV player: [URL]
View 2 Replies
View Related
May 29, 2011
I have always rendered my projects to DVD (mpeg) video files and then used those to 'create disk' (ie create movie).
I also thought that to prevent 'create' disk' from rendering again that all the attributes (constant or variable, kbs, audio compression) used during rendering must be the same as when creating disk.
Is there any benefit from creating a movie (for burning) using either method? Is it faster overall 'creating disk' using project files than rendering first? The reason I ask is that today it seemed to take 'forever' to 'create disk' using pre-rendered files.
I realise that you always see the warning that 'this action will take some time to render' but I thought that if all the attributes were the same that no rendering was done.
View 14 Replies
View Related
Feb 10, 2006
Nature of the problem: Following the recommended procedure, I get to the phase where you created a video file. However when I go to preview the file, its badly pixelated.
Properties of your source files: All are clips from unprotected DVDs and play fine when captured.
What devices are involved and their mode of connection: Direct from computer's DVD player/recorder.
Project Settings: As listed under recommended procedure.
Output format: Mpeg to be burned to DVD.
PAL or NTSC: NTSC
Error Codes (if any): None
System information: AMD 64 3500+ w/ Dual SLi 7800 GTs and 2 GB of RAM.
I suspect that its a setting somewhere that has been changed because on a prototype I made using some of the same clips it worked fine. Then just stopped and started pixelating out of the blue.
View 9 Replies
View Related
Feb 23, 2013
In VS X4 Create Video File there are several AVCHD settings.what the difference is between AVCHD 1440 x 1080P and AVCHD 1440 x 1080 ?With and without "P"?
View 4 Replies
View Related
Nov 29, 2011
is there a way to share "create final video" in 1024x768 mp4 h264?
because my source video is in 1024x768. i can create final video in 640x480 but quality is lower. and when i create final video in 1280x720 or in 1920 x 1080.(presets of MPEG-4 in videostudio x4), i always get black borders on sides and ALSO under and above.
View 4 Replies
View Related
Apr 11, 2013
I couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
View 1 Replies
View Related
Sep 29, 2011
I've acquired the Corel Video Studio Pro x4 recently, and across an unplesant problem shortly after instalation. The "create video file" makes the program crash every time i press it.
View 3 Replies
View Related
Oct 17, 2010
If I have two cameras pointing toward one subject (say someone being interviewed) what would be the best way to place the two video tracks in X3?
One I would be the main video track, but would the other have to be the over lay track? Is there an option to create a 2nd main video track that I could switch between? So when I am editing an interview clip I could pick between video track 1 or 2 and choose the angle I want?
View 8 Replies
View Related
Oct 2, 2012
Can you create speech balloons in editing VS Pro X5 video clips?
View 4 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related