VideoStudio :: Using Corel DVD Factory To Create Video Disk?
Jul 9, 2011
I would like to use Corel DVD Factory to "Create Video Disk". I have created my mpg (Movie Clip) vidoe file and have placed it in a "c:video" directory tree.
How can I user Corel DVD Factory to Create Disk and drag/drop my file to that application?
When I "Select Photos and Videos" it brings up the Library but it doesn't show what I want and I'm not sure how to navigate tothe .mpg file I created so that I can drag/drop to the Media Tray.
View 1 Replies
ADVERTISEMENT
Jun 7, 2012
I have tried burning a Blu-ray disk using Movie Fatory 7 without any success. First of all I tried to burn an mpeg file to the disk (File Format not supported message in DVD Movie Factory), then in VS4 I tried "create video file" as a blu-ray format PAL Mpeg2 1920x1080 in VS4 - then went to "Create Disc" opened DVD Movie Factory 7 and selected BluRay, (File Format not supported message in DVD Movie Factory), so then I searched these forums and found that it looked like I should create a AVCHD file format in VS4 PAL HD 1920, so I did that and then went to "Create Disc" and got the same error message that file is not supported.
How do I create a BluRay disc that will play in a bluray machine? I have bought blank BluRay discs, but Movie Factory won't burn my file formats?
View 12 Replies
View Related
Feb 20, 2011
I'm done editing my first movie using Videostudio X3 Pro. I want to create a DVD using Corel DVD Factory 2010 that comes with VS.I've got 4,4GB space on my blank DVD but my movieproject is 5,6 GB. How can I make DVD Factory 2010 split the movie on to 2 DVDs.
View 1 Replies
View Related
Jun 26, 2013
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
View 1 Replies
View Related
Dec 17, 2010
Does the trial/evaluation version of VideoStudio Pro X3 - DVD factory Pro 2010 support creating Blu ray disks. Or is this only possible with the full/bought version?
I downloaded the trial version of VideoStudio Pro X3 which includes DVD factory Pro 2010 version 1.6.0.367 (dutch language version). With DVD factory starting a new videodisk I cannot select blu ray disk in the project settings. I can only select as disk: DVD and as project setting: Dvd-video or AVCHD.
I searched but could not find any resolution. I do like the editing software so very happy so far but before I buy the software, I want to make sure I can create blu ray disks (do a test).
Note: I do have two drives, first drive is Blu-ray burner (LG HL-DT-ST BD-RE BH08LS20) and second drive is normal DVD burner (TSSTcorp CDDVDW SH-S223C)
View 5 Replies
View Related
Jul 6, 2012
I'm using the free trial version of Videostudio X5 and have 3 video files I am trying to burn to a BD-R disk. The files are H.264 and when I preview it before burning, the menu I created works fine. One of the three files is large, over 9gb. When I burn the disk, the large video file is not burning correctly. When I go into that file from the menu, it just loops back to the first menu item. I tried burning just the large file to a BD-R and it worked fine. The total project size is around 17 gb so I'm under the 25 gb limit. I think the next thing I'll try is breaking the large video file into two files. I'd like to buy the software if I can get past this glitch.
View 7 Replies
View Related
Nov 20, 2012
I downloaded yesterday the trial version of Corel X5 pro. The program looks great and I made a photo and videocompilation of 8 minutes with background music and slides. Here's the problem. When I want to burn DVD, the program starts, but after 10 minutes i see 99% on the 2nd level and the program jams. It happens everytime when I want to burn of make a video on my harddisk. I am seriously looking for a decent program where i can make nice photo and video slides, but Corel doesn't useful. I have Windows 7 Ultimate and my burner works fine. Only with Corel, like i written before it jams and then i have to quit the program.
View 3 Replies
View Related
Jan 14, 2011
The video capture function for my Corel VideoStudio12 program. When I hit the capture tab, nothing happens. Just two months ago my 17 year old son used the program without any problems. All the other functions are working (edit, effect, overlay, title, audio,).
I am not very tech savvy, so I hope there is a simple solution. I am able to capture video with Windows Movie Maker, but I prefer to use Corel as it is a much better program.My operating system is Vista Home Premium, I am using a firewire connection to a Panasonic Camcorder, model PV-GS83.
View 2 Replies
View Related
Jan 22, 2012
Effects Tools grayed out after factory reset- what do I do to restore function? :-/
View 5 Replies
View Related
Jan 7, 2012
I am trying to create a Blu-ray disk image in X4, but that option is grayed out. The video is 1440x1080 - shot on a Sony camera.
It will let me create the folders and will offer to burn a disc (but I don't have a blu-ray writer).
I am looking to create an ISO for two reasons:
1. To burn a disk from the image later when I do get a burner; and
2. To play through my WD Live (it plays ISOs)
I prefer the ISO to just the folders because it is is in just one neat file.
View 2 Replies
View Related
May 9, 2011
I have a new computer with Windows 7. I just loaded VS x2 with all the patches and extra content. I can create projects fine but when I try to "share" and create a disk nothing happens. I clock on the "create disk" button and a small square grey box appears next to the button but nothing else happends.
I have the most current Windows 7 drivers & updates and drivers for my disk drive. It worked fine in Windows XP.
View 3 Replies
View Related
Mar 9, 2012
Tonight I created my first DVD disk (ie authored a DVD) using X4 which I purchased last year.It seemed to take a much longer time to complete especially the creation of the title (menu?) than what I am used to using VS10.
Is this normal?
Is this a known 'problem' with X4?
What are others using to author a DVD?
Should I use VS10 to 'create disk'?
BTW I authored using the same characteristics as I used when I created my DVD file (create video file) so I don't think that it re-rendered.Also I am creating a 'standard definition' DVD not high def.
View 9 Replies
View Related
Dec 20, 2012
I am now getting a unspecified error when I try to create a disc. It tells me to:send the file C:documents and settingsxxxlocal settings empvstudio_14.0.1.3_20101220_083832.DMP to tech support. Trouble is there is no technical support unless I have a paid subscription. I cannot read the file because windows xp will not recognize it. I see nowhere on here that I can attach the named file.
View 14 Replies
View Related
Jan 1, 2013
I am trying to use Video Studio Pro X2 to create a DVD on my new Windows 7 PC. I have produced the project file (95 minutes) and am now ready to burn the disk. I have used the software before on my old PC (Windows XP) with no problems. From the "Share" menu I selected Create Disk and DVD.
I am trying to amend the Project Settings in order that the project file (lasting 95 minutes) fits nicely on a 4.7Gb Disk. I have set-up a Disk Template (which should hopefully produce a file about the right size) and want to select that template for my project. The problem I am having is that when I select Create Disk, the Project Settings button is not displayed, so I cannot select the template I have set-up. The Project Settings button should sit just to the right of the Settings and Options button on the bottom left of the screen, just under the main panel (according to page 146 in the manual), but on my screen (see image attached) all I can see is the Settings and Options button, and then a half-obscurred "Next" button (which should sit on the right of the page, but on my page it is on the left, partly hidden by the Settings and Options button). There is also no "Close" or "Change Display aspect ratio" buttons visible too, which are shown in the manual, but don't appear on my screen.
This is the first time I have used VS Pro X2 on my new Windows 7 PC - it worked fine on my old XP machine and I have never had this problem before. I am now using Windows 7 (64 bit version). I have tried doing a "Repair" to Pro X2 using Control Panel, but this has made no difference...I am still getting this corrupted page without the very button I need to change template. Any way I can create a file that is about the right size to fit on a 4.7Gb blank Disk.
View 3 Replies
View Related
Aug 20, 2012
How to create an MPEG2 file before creating the disk, I just tried to do this and although I'm using 1080/50i footage in 16:9, the only options it gives is below.
I am now trying to render using the optimiser in custom mode which gives me the settings I need, i.e. higher data rate and 16:9, but still cant adjust the audio type etc.
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(MPEG-2), 4:3
Video data rate: Variable (Max. 6000 kbps)
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
Is there a better way of creating the MPEG2 file.
View 5 Replies
View Related
Aug 29, 2012
Using X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.
But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.
View 14 Replies
View Related
Oct 11, 2010
Where is Get more link for Movie Factory 7 SE?
I think that I have to re-install this, as I don't think it is properly installed
View 6 Replies
View Related
Mar 25, 2011
I first had Windows Vista Home Premium 32-bit. Sometimes I could open a project in DVD Factory 2010. Mostly the system crashed.
Now I have Windows 7 Home Premium 64-bit. I hoped things would be better now. When I open Corel DVD factory 2010 directly and click on "Project" on the left nothing happens?
View 3 Replies
View Related
Oct 27, 2010
how to get the dvd factory pro 2010 running on a windows 7 pc? I just installed videostudio x3 on my pc and I cannot burn a dvd.
View 1 Replies
View Related
Sep 14, 2012
I have a 4:3 PAL project and I have been told to create.. a video that is 720 x 576 16:9 anamorphic or 4:3 anamorphic if using Premier pro
View 3 Replies
View Related
Mar 27, 2013
I am trying to CREATE A VIDEO FILE in X6. The video files are in AVI format (taken from DSLR). When I do try to create a video file I get the error message:
I do not get this error in X4. Further, it seems I don't get this error message in all AVI files. Some are ok, others aren't. very strange indeed.
View 1 Replies
View Related
Feb 21, 2012
Im getting myself in a mess with this one, i need to have a picture as the background With two videos running one in the blue section & one in the red!
Is there a easy way to do this? or will i have to make two mask one for each video? if so how would i make them?
View 4 Replies
View Related
Jun 18, 2011
I created a long video of me playing a number of cover songs and I want to grab those songs individually so I can post them on YouTube.
I'm using Ulead Video Studio 11 Plus.
View 13 Replies
View Related
Jul 3, 2013
I want to reverse a video clip backwards at speed.
How could I create the old VHS rewind-look where distorted lines appear across the screen. Any filters handy for this? Using VSP x6 Ultimate.
View 4 Replies
View Related
Nov 19, 2012
I have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies
View Related
Nov 30, 2012
I am trying to create a introduction clip to a video. This is just a short written intro describing the contents of the video. Is there a method in VideoStudio X5 Pro that would allow me to do this?
View 3 Replies
View Related
Jul 7, 2011
Need brief overview of the different formats in "Create Video File"?
MPEG-4, DV, DVD and the difference between this and Create Disk?
I have created my project on a laptop that does not have a DVD Burner. Should I create an MPEG file and copy it over to a desktop that has a DVD burner? Just looking for the best way burn a DVD.
View 3 Replies
View Related
Jan 25, 2011
I am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
View 8 Replies
View Related
Jun 7, 2012
I have been trying to create a short video that will show some video through a title. I have found a Corel Tutorial on how to do this but it seems to be for an earlier version of VS since I do not see some of the screens in X5 that are shown in the tutorial. I am still basically a beginner with some of the VS features so may have easily overlooked the process.
View 3 Replies
View Related
Feb 17, 2011
I have 50 inch 1080p TV and a media player that can play almost any format. I have VideoStudio X3 and a decent core2 PC running XP. I have a few 1 hour each video files that I captured from my sony SD camcorder few years back using Firewire. These video files are like 25GB each and not high def.
Now I have edited some of these video files but I am not sure what is the best format to use when creating video file to watch it on my HDTV. I don't need to burn disks or re-edit the files once I am done editing one time.
I have tried custom MPEG2 with 8000 bit rate and 100% quality and it looks okay but grainy on my HDTV. I tried avchd/Blu-ray and they look much smoother on HDTV however they are a bit soft and dull in colors and not as sharp as custom mpeg2.
There are so many formats like DVD mpeg2/AVCHD/HDV/Blu-ray with mpeg2 or h.264 and videostudio help did not do a good job explaining them So I would hope experts here would guide me what best quality format should I pick for these SD videos so that they look nice on my HDTV. Would picking aspect ration to 16:9 make any difference for these sd video?
I am sure when I buy an HD camcorder I would have better options to keep picture quality great.
View 3 Replies
View Related
Jul 30, 2012
Given that it seems to be a good idea to render VSP projects to a single video file before attempting to create a DVD through Share Create Disc, I am wondering what is the most optimal type of video file to initially render the VSP into.
The video from my camera comes in a ACVHD 1080/60i. My target final disc is either 1) standard DVD, or 2) Blu Ray. I have been rendering the VSP into a 1920x1080 AVCHD format.
View 1 Replies
View Related
